Hunter X-Core 8-Station Outdoor Irrigation Controller

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Hunter X-Core 8-station outdoor controller is designed to provide essential water management features in a compact and user-friendly device. It is ideal for residential landscapes, offering convenient Seasonal Adjust capabilities for quick schedule updates throughout the year without altering individual run times. The Cycle & Soak feature ensures plants properly absorb water, preventing runoff. Additionally, its Easy Retrieve memory backs up controller settings in the event of a power outage, ensuring your irrigation schedule remains intact.

പ്രധാന സവിശേഷതകൾ

• Provides essential water management features in a user-friendly outdoor controller to ensure beautiful, healthy landscapes for up to 8 stations.
• 3 flexible programs with 4 start times each and run times up to 4 hours to accommodate most residential and light commercial irrigation system needs.
• Compatible with Hunter weather sensors to halt irrigation during rain, freeze, and wind events.
• Programs are stored in memory so irrigation resumes normally after a power outage.
• Built-in key lock on outdoor models protects against vandalism.
• Power source type: Electric.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The X-Core controller is designed for straightforward installation. Ensure the mounting location is suitable for an outdoor electrical device, protected from direct sunlight and extreme weather conditions where possible. The unit comes with a built-in transformer for easy power connection.

Figure 1: Hunter X-Core controller securely mounted on an exterior wall, demonstrating typical outdoor installation.

വയറിംഗ് കണക്ഷനുകൾ

Open the controller's front cover to access the wiring terminals. Connect the common wire from your irrigation valves to the common terminal (usually labeled 'C'). Connect each zone wire to its corresponding station terminal (1-8). Ensure all connections are secure. The controller includes an internal transformer for power supply.

ചിത്രം 2: ആന്തരിക view of the Hunter X-Core controller, highlighting the wiring terminals for common and station wires, along with the internal transformer.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The X-Core controller features a user-friendly dial and button interface for programming. Rotate the dial to select different programming modes such as setting the current time/day, start times, run times, and water days.

Figure 3: The main interface of the Hunter X-Core controller, showing the LCD display, control dial, and navigation buttons for programming.

പ്രോഗ്രാമിംഗ് കഴിഞ്ഞുview

The controller supports up to three independent programs (A, B, C), each with four start times. This allows for flexible scheduling to meet diverse landscape needs.

• Set Current Time/Day: Rotate the dial to the 'Current Time/Day' position and use the arrow buttons to set the correct time and date.
• ആരംഭ സമയങ്ങൾ സജ്ജമാക്കുക: For each program (A, B, C), rotate the dial to 'Start Times' and set up to four desired start times using the arrow buttons.
• Set Run Times: Rotate the dial to 'Run Times'. Select the program and station, then use the arrow buttons to set the duration for each station.
• ജലദിനങ്ങൾ സജ്ജമാക്കുക: Rotate the dial to 'Water Days'. Choose your preferred watering schedule (e.g., specific days of the week, odd/even days, or interval watering).
• സീസണൽ ക്രമീകരണം: Use this feature to quickly adjust watering durations for all programs by a percentage, adapting to seasonal changes without reprogramming.
• മാനുവൽ പ്രവർത്തനം: The controller allows for manual watering of a single station or all programmed stations for a specified duration.

ഔദ്യോഗിക ഉൽപ്പന്ന ഗൈഡ് വീഡിയോ

മെയിൻ്റനൻസ്

Regular maintenance ensures optimal performance and longevity of your X-Core controller. Keep the unit's exterior clean and free from debris. Periodically check wiring connections for tightness and signs of corrosion. Ensure the key lock mechanism functions smoothly to protect against unauthorized access.

സെൻസർ ഇന്റഗ്രേഷൻ

For enhanced water conservation, the X-Core is compatible with Hunter weather sensors, such as the Solar Sync ET sensor. This sensor automatically adjusts irrigation run times based on local weather conditions, including rain and freezing temperatures, preventing unnecessary watering.

Figure 4: The Hunter X-Core controller shown in its original packaging, which typically includes the user manual and installation guide for reference.

ട്രബിൾഷൂട്ടിംഗ്

The X-Core controller includes a "QuickCheck" feature to assist with troubleshooting wiring issues. If a short circuit is detected on a station, the display will show an "err" message, indicating the specific station number affected. This helps in quickly identifying and resolving field wiring problems.

• ഡിസ്പ്ലേ/പവർ ഇല്ല: Check the power connection and ensure the outlet is functional. Verify the internal transformer is properly seated.
• Station Not Watering: Check the wiring connection for that specific station at the controller and at the valve. Use the QuickCheck feature to identify potential shorts. Ensure the station's run time is set and the program is active.
• Controller Not Watering: Verify the system is not in "System Off" mode or "Rain Delay". Check the main water supply to the irrigation system.
• Incorrect Watering Times: Review your program settings (start times, run times, water days) to ensure they match your desired schedule. Check the Seasonal Adjustment percentage.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

The Hunter X-Core controller is backed by a two-year factory warranty, ensuring reliability and peace of mind. For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided in your product's physical manual or visit the official Hunter Industries webസൈറ്റ്.