Okin BetaDrive Linear Actuator Motor 1.25.000.073.30 User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Okin BetaDrive Linear Actuator Motor, part number 1.25.000.073.30 (also known as MTR157), is a replacement motor designed for power recliners and lift chairs. This motor is responsible for the smooth opening and closing of the lift mechanism, restoring full functionality to your furniture.

• മോഡൽ: 1.25.000.073.30 / MTR157
• ബ്രാൻഡ്: Okin (Manufactured by Okin America)
• പ്രവർത്തനം: Operates the lift mechanism in power recliners and lift chairs.

ചിത്രം 1: പൂർണ്ണം view of the Okin BetaDrive Linear Actuator Motor. This image displays the complete unit, including the motor housing, linear shaft, and mounting brackets.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Always prioritize safety during installation and operation.

• അസംബ്ലി നിർദ്ദേശങ്ങൾ എല്ലായ്പ്പോഴും ശ്രദ്ധാപൂർവ്വം വായിക്കുകയും പിന്തുടരുകയും ചെയ്യുക.
• Do not attempt to operate the chair until it is fully assembled and all connections are secure.
• Keep fingers, clothing, and other body parts clear of the lift mechanism and moving parts while the chair is in use to prevent injury.
• Do not exceed the maximum weight capacity of the chair as specified by the chair manufacturer.
• ഏതെങ്കിലും ഇൻസ്റ്റാളേഷൻ, അറ്റകുറ്റപ്പണി അല്ലെങ്കിൽ ട്രബിൾഷൂട്ടിംഗ് നടത്തുന്നതിന് മുമ്പ് വൈദ്യുതി വിതരണം വിച്ഛേദിക്കപ്പെട്ടുവെന്ന് ഉറപ്പാക്കുക.

3. ഇൻസ്റ്റാളേഷൻ ഗൈഡ്

Replacing the Okin BetaDrive Linear Actuator Motor is a straightforward process, typically requiring basic tools. It is recommended to have assistance when flipping the recliner chair.

1. കസേര തയ്യാറാക്കുക: Unplug the recliner chair from the power outlet. Carefully flip the chair over to expose the underside mechanism.
2. Identify the Old Motor: Locate the existing linear actuator motor. Note its mounting points and electrical connections.
3. വൈദ്യുതി കണക്ഷനുകൾ വിച്ഛേദിക്കുക: Disconnect all electrical cables connected to the old motor. These typically include the main power cable and any control cables.
4. പഴയ മോട്ടോർ നീക്കം ചെയ്യുക: Using appropriate tools (e.g., a wrench for bolts), unfasten the bolts or pins securing the old motor to the chair's frame. Carefully remove the old motor.
5. പുതിയ മോട്ടോർ സ്ഥാപിക്കുക: Position the new Okin BetaDrive Linear Actuator Motor in the same location as the old one. Secure it using the original bolts or pins. Ensure all connections are tight and the motor is stable.
6. വൈദ്യുതി കണക്ഷനുകൾ വീണ്ടും ബന്ധിപ്പിക്കുക: Connect the electrical cables to the new motor. Ensure they are securely plugged in and routed to avoid pinching or damage when the chair operates.
7. ടെസ്റ്റ് ഓപ്പറേഷൻ: Carefully return the chair to its upright position. Plug the chair back into the power outlet. Test the recliner's functions (up and down) to ensure the new motor operates correctly and smoothly.

ചിത്രം 2: ക്ലോസ്-അപ്പ് view of the Okin BetaDrive Linear Actuator Motor's connector end. This image highlights the electrical connection points for installation.

4. ഓപ്പറേഷൻ

Once installed, the Okin BetaDrive Linear Actuator Motor operates seamlessly with your recliner's existing control system. Simply use the chair's remote or integrated buttons to extend or retract the footrest and recline the backrest. The motor provides the necessary linear motion to achieve your desired position.

• Press and hold the "Recline" or "Extend" button to move the chair into a reclined position.
• Press and hold the "Upright" or "Retract" button to return the chair to its upright position.
• Release the button at any point to stop the motion.

5. പരിപാലനം

Proper maintenance ensures the longevity and smooth operation of your Okin BetaDrive Linear Actuator Motor.

• വൃത്തിയാക്കൽ: Wipe clean the exterior of the motor and the linear shaft with a dry or slightly damp തുണി. കഠിനമായ രാസവസ്തുക്കളോ ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
• പരിശോധന: Periodically inspect the motor and its connections for any signs of wear, damage, or loose fasteners. Ensure all cables are intact and not frayed.
• ലൂബ്രിക്കേഷൻ: The linear screw mechanism is typically pre-lubricated. Avoid applying additional lubricants unless specifically recommended by the manufacturer, as this could attract dust and debris.
• ശക്തി: Ensure the motor is connected to a stable power source within the specified voltagഇ ശ്രേണി (24V).

6. പ്രശ്‌നപരിഹാരം

If you encounter issues with your recliner after installing the Okin BetaDrive motor, consider the following troubleshooting steps:

• മോട്ടോർ പ്രതികരിക്കുന്നില്ല:
  • Check all power connections. Ensure the chair is plugged into a working outlet and all motor cables are securely connected.
  • Verify the power supply unit (transformer) is functioning correctly.
  • Inspect the hand control for damage or loose connections.
• Motor Operates Slowly or Jerkily:
  • Ensure the chair's mechanism is not obstructed by foreign objects.
  • Check for any binding in the chair's frame or moving parts that might impede the motor's movement.
  • Confirm the chair is not overloaded beyond its weight capacity.
• അസാധാരണമായ ശബ്ദങ്ങൾ:
  • Listen for the source of the noise. It could indicate a loose bolt, a worn part in the chair's mechanism, or an issue with the motor itself.
  • If the noise persists and is clearly from the motor, contact customer support.

If troubleshooting steps do not resolve the issue, contact the manufacturer or a qualified technician for assistance.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support regarding your Okin BetaDrive Linear Actuator Motor, please contact Okin America directly or the retailer from whom you purchased the product. Ensure you have your model number (1.25.000.073.30 or MTR157) and proof of purchase available when contacting support.

നിർമ്മാതാവ്: Okin America

For patents and additional information, refer to the manufacturer's official website or documentation provided with your product.