ഡാൻകോ 10773

DANCO VersiTech Cartridge 10773 User Manual

For Glacier Bay, AquaSource, and PurePro Tub and Shower Faucets

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The DANCO VersiTech Cartridge 10773 is designed as a replacement component for leaky tub and shower faucets. Constructed from durable plastic, this cartridge ensures reliable performance and is compatible with hot and cold water applications. It is specifically engineered to fit Glacier Bay, AquaSource, and PurePro faucet models, offering a practical solution to extend the life of your existing faucet without requiring a full replacement.

DANCO VersiTech Cartridge 10773
ഫ്രണ്ട് view of the DANCO VersiTech Cartridge 10773, showing its general shape and brass stem.
വശം view of cartridge
വശം view of the cartridge, highlighting its plastic body and connection points.
താഴെ view of cartridge
താഴെ view of the cartridge, showing the water inlets and outlets.
മുകളിൽ view of cartridge
മുകളിൽ view of the cartridge, displaying the internal mechanism and hot/cold indicators.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Before beginning installation, ensure the main water supply to your home is turned off to prevent water damage. Gather necessary tools such as a screwdriver, adjustable wrench, and possibly a cartridge puller.

  1. ഫ്യൂസറ്റ് ഹാൻഡിൽ നീക്കം ചെയ്യുക: Carefully remove the screw securing the faucet handle. This screw is often located under a decorative cap. Once the screw is removed, pull the handle off.
  2. Removing faucet handle screw
    A hand using a screwdriver to remove the screw from the center of a chrome faucet handle, preparing for cartridge access.
  3. Remove Trim Plate: Unscrew and remove the decorative trim plate (escutcheon) to expose the cartridge housing.
  4. പഴയ കാട്രിഡ്ജ് വേർതിരിച്ചെടുക്കുക: Depending on your faucet model, you may need a cartridge puller tool to remove the old cartridge. Grip the stem of the old cartridge and pull it straight out. Note the orientation of the old cartridge for correct installation of the new one.
  5. Removing old faucet cartridge
    A hand holding a removed faucet cartridge, with the exposed faucet opening visible in the background, illustrating the removal process.
  6. വൃത്തിയുള്ള ഭവനം: Inspect the inside of the faucet body for any debris or mineral buildup. Clean thoroughly to ensure a proper seal for the new cartridge.
  7. പുതിയ കാട്രിഡ്ജ് ഇൻസ്റ്റാൾ ചെയ്യുക: Insert the new DANCO VersiTech Cartridge 10773 into the faucet body, ensuring it is correctly aligned. The hot and cold indicators (red and blue) on the cartridge should typically align with the corresponding markings on the faucet body or your desired hot/cold orientation.
  8. Inserting new faucet cartridge
    A hand carefully inserting a new faucet cartridge into the faucet body, ensuring proper alignment.
  9. ഫ്യൂസറ്റ് വീണ്ടും കൂട്ടിച്ചേർക്കുക: Reattach the trim plate and secure it with screws. Place the faucet handle back onto the stem and tighten its screw.
  10. Reassembled faucet
    A fully reassembled tub and shower faucet, ready for use after cartridge replacement.
  11. ജലവിതരണം പുനഃസ്ഥാപിക്കുക: Slowly turn the main water supply back on. Check for any leaks around the faucet.

For additional guidance on identifying the correct replacement part or detailed installation videos, you may visit the Danco Leaky Faucet Guide.

3. ഓപ്പറേഷൻ

The DANCO VersiTech Cartridge 10773 controls the flow and temperature of water in your tub and shower faucet. Once installed, the faucet handle will operate as designed by the original manufacturer, allowing you to adjust water temperature and volume. The cartridge is designed to handle both hot and cold water applications effectively.

4. പരിപാലനം

To ensure the longevity and optimal performance of your DANCO VersiTech Cartridge, regular maintenance is recommended:

  • പതിവ് വൃത്തിയാക്കൽ: Periodically clean the faucet exterior and handle with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that can damage the finish.
  • ചോർച്ച പരിശോധിക്കുക: Regularly inspect the faucet for any signs of dripping or leaks. Addressing minor leaks promptly can prevent further damage and water waste.
  • ജലത്തിൻ്റെ ഗുണനിലവാരം: In areas with hard water, mineral deposits can accumulate over time. If water flow becomes restricted or temperature control is affected, the cartridge may need to be inspected or replaced.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues after installing the DANCO VersiTech Cartridge, consider the following troubleshooting steps:

  • ചോർച്ചയുള്ള പൈപ്പ്: If the faucet continues to leak after cartridge replacement, ensure the cartridge is fully seated and properly aligned. Check for any debris in the cartridge housing that might prevent a tight seal. Verify that the O-rings on the cartridge are intact and correctly positioned.
  • ചൂടുവെള്ളമോ തണുത്ത വെള്ളമോ വേണ്ട: If only hot or cold water is flowing, or if temperature control is erratic, check the orientation of the cartridge. The hot and cold indicators (red and blue) must be correctly aligned with the faucet's internal channels.
  • കുറഞ്ഞ ജല സമ്മർദ്ദം: Reduced water pressure might indicate a blockage. Remove the cartridge and inspect it and the faucet body for any mineral buildup or debris.
  • Stiff Handle Operation: If the handle is difficult to turn, ensure all components are properly lubricated (using plumber's grease suitable for potable water) and that no parts are overtightened.

6 സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ബ്രാൻഡ്ഡാൻകോ
മോഡൽ നമ്പർ10773
മെറ്റീരിയൽപ്ലാസ്റ്റിക്
അനുയോജ്യതGlacier Bay, AquaSource, PurePro faucets
പ്രത്യേക സവിശേഷതകൾLeak Elimination, Low Lead Compliance
ഇനത്തിൻ്റെ ഭാരം6.4 ഔൺസ്
ഉൽപ്പന്ന അളവുകൾ5.25 x 1.5 x 1.5 ഇഞ്ച്
Water Applicationചൂടും തണുപ്പും

7. വാറൻ്റിയും പിന്തുണയും

The DANCO VersiTech Cartridge 10773 comes with a പരിമിതമായ 1 വർഷത്തെ വാറൻ്റി. For warranty claims or technical support, please refer to the contact information provided by Danco or your product retailer. Keep your purchase receipt as proof of purchase.

For further assistance or to find other Danco products, visit the official ആമസോണിലെ ഡാൻകോ സ്റ്റോർ.

അനുബന്ധ രേഖകൾ - 10773

പ്രീview ഒരു ടബ് സ്പൗട്ട് എങ്ങനെ മാറ്റിസ്ഥാപിക്കാം: ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ
വിജയകരമായ DIY ബാത്ത്റൂം നവീകരണത്തിനുള്ള ഉപകരണങ്ങൾ, സപ്ലൈസ്, ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ എന്നിവയുൾപ്പെടെ 1/2 ഇഞ്ച് ചെമ്പ് പൈപ്പ് സ്ലിപ്പ് കണക്ഷൻ ടബ് സ്പൗട്ട് എങ്ങനെ മാറ്റിസ്ഥാപിക്കാം എന്നതിനെക്കുറിച്ചുള്ള വിശദമായ ഗൈഡ്.
പ്രീview മോയിൻ ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾക്കുള്ള ഡാൻകോ മെറ്റൽ ടബ്/ഷവർ ഹാൻഡിൽ | മോഡൽ 11009i
മോയിൻ പോസിടെമ്പ്, മോയിൻട്രോൾ വാൽവുകൾക്കായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്ന ഒരു ഡാൻകോ മെറ്റൽ ടബ്/ഷവർ ഹാൻഡിൽ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ. വാൽവ് തിരിച്ചറിയൽ, പഴയ ഹാൻഡിലുകൾ (അക്രിലിക്, മെറ്റൽ) നീക്കംചെയ്യൽ, പുതിയ ഡാൻകോ ഹാൻഡിൽ ഇൻസ്റ്റാൾ ചെയ്യൽ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു. ആവശ്യമായ ഉപകരണങ്ങളും ഡൈവേർട്ടർ വാൽവുകളെക്കുറിച്ചുള്ള പ്രധാന കുറിപ്പുകളും ഉൾപ്പെടുന്നു.
പ്രീview ഡാൻകോ 80015 യൂണിവേഴ്സൽ ഡൈവേർട്ടർ ഹാൻഡിൽ ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
അഡാപ്റ്റർ ഉപയോഗിച്ച് Danco 80015 യൂണിവേഴ്സൽ ഡൈവേർട്ടർ ഹാൻഡിൽ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ, പാർട്സ് ഡയഗ്രമും ആവശ്യമായ ഉപകരണങ്ങളും ഉൾപ്പെടെ.
പ്രീview ഡെൽറ്റ ഫ്യൂസറ്റുകൾക്കുള്ള ഡാൻകോ ഫ്യൂസറ്റ് പുനർനിർമ്മാണ കിറ്റ് ഇൻസ്റ്റാളേഷൻ നിർദ്ദേശങ്ങൾ
ഡെൽറ്റ ഫ്യൂസറ്റുകൾക്കായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്ന ഡാൻകോ ഫ്യൂസറ്റ് പുനർനിർമ്മാണ കിറ്റിനായുള്ള ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ ഗൈഡ്. ആവശ്യമായ ഉപകരണങ്ങളും ഫ്യൂസറ്റ് ഭാഗങ്ങൾ മാറ്റിസ്ഥാപിക്കുന്നതിനുള്ള വിശദമായ നിർദ്ദേശങ്ങളും ഉൾപ്പെടുന്നു.
പ്രീview 3" ക്രമീകരിക്കാവുന്ന ടോയ്‌ലറ്റ് ഫ്ലഷ് വാൽവിനുള്ള ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ | ഡാൻകോ
ഡാൻകോ 3-ഇഞ്ച് ക്രമീകരിക്കാവുന്ന ടോയ്‌ലറ്റ് ഫ്ലഷ് വാൽവ് (മോഡൽ 120971) ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുള്ള ഘട്ടം ഘട്ടമായുള്ള ഗൈഡ്. ആവശ്യമായ ഉപകരണങ്ങൾ, മുന്നറിയിപ്പുകൾ, ടാങ്ക് തയ്യാറാക്കുന്നതിനും പഴയ വാൽവ് നീക്കം ചെയ്യുന്നതിനും പുതിയ വാൽവ് ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും ഘടകങ്ങൾ ബന്ധിപ്പിക്കുന്നതിനുമുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ഒരു ടബ് സ്പൗട്ട് എങ്ങനെ മാറ്റിസ്ഥാപിക്കാം: ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ ഗൈഡ്
സാധാരണ ചെമ്പ് പൈപ്പ് സ്ലിപ്പ് കണക്ഷനിൽ ശ്രദ്ധ കേന്ദ്രീകരിച്ച്, ഒരു ടബ് സ്പൗട്ട് എങ്ങനെ മാറ്റിസ്ഥാപിക്കാം എന്നതിനെക്കുറിച്ചുള്ള ഒരു സമഗ്ര ഗൈഡ്. വിജയകരമായ ഇൻസ്റ്റാളേഷനായി ആവശ്യമായ ഉപകരണങ്ങൾ, സാധനങ്ങൾ, ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ എന്നിവ പഠിക്കുക, പഴയ സ്പൗട്ടുകൾ നീക്കം ചെയ്യുന്നതിനും വെള്ളം കടക്കാത്ത സീൽ ഉറപ്പാക്കുന്നതിനുമുള്ള നുറുങ്ങുകൾ ഉൾപ്പെടെ.