Intermatic ST01

Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

മോഡൽ: ST01

1. ആമുഖം

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Intermatic ST01 24-Hour In-Wall Timer, front view

ചിത്രം 1: മുൻഭാഗം view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

3. പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്ന് ഉറപ്പാക്കുക:

4. ഇൻസ്റ്റലേഷൻ

സുരക്ഷിതവും ശരിയായതുമായ ഇൻസ്റ്റാളേഷനായി ഈ ഘട്ടങ്ങൾ പാലിക്കുക:

  1. പവർ ഓഫ് ചെയ്യുക: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltagഇ ടെസ്റ്റർ.
  2. നിലവിലുള്ള സ്വിച്ച് നീക്കംചെയ്യുക: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
  3. Wire the Timer: The ST01 timer typically has three wires:
    • Black (Line): Connect to the incoming hot wire from the circuit breaker.
    • Red (Load): Connect to the wire going to the light fixture or appliance.
    • പച്ച (നിലം): Connect to the bare copper or green ground wire in the wall box.
    Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
  4. Mount the Timer: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
  5. വാൾ പ്ലേറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: Attach a standard wall plate (not included) over the timer.
  6. പവർ പുന ore സ്ഥാപിക്കുക: സർക്യൂട്ട് ബ്രേക്കറിലോ ഫ്യൂസ് ബോക്സിലോ വീണ്ടും പവർ ഓണാക്കുക.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. പ്രാരംഭ സജ്ജീകരണവും പ്രോഗ്രാമിംഗും

ആദ്യം പവർ-അപ്പ് ചെയ്യുമ്പോൾ അല്ലെങ്കിൽ പവർ OU ന് ശേഷംtage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

  1. നിലവിലെ സമയം സജ്ജമാക്കുക:
    • അമർത്തുക ക്ലോക്ക് ബട്ടൺ.
    • ഉപയോഗിക്കുക മണിക്കൂർ ഒപ്പം മിനിറ്റ് buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
    • അമർത്തുക ക്ലോക്ക് സംരക്ഷിക്കാനും പുറത്തുകടക്കാനും വീണ്ടും.
  2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
    • അമർത്തുക PROG ബട്ടൺ. ഡിസ്പ്ലേ "1 ഓൺ" കാണിക്കും.
    • ഉപയോഗിക്കുക മണിക്കൂർ ഒപ്പം മിനിറ്റ് buttons to set the desired ON time for program 1.
    • അമർത്തുക PROG വീണ്ടും. ഡിസ്പ്ലേ "1 ഓഫ്" കാണിക്കും.
    • ഉപയോഗിക്കുക മണിക്കൂർ ഒപ്പം മിനിറ്റ് buttons to set the desired OFF time for program 1.
    • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
    • അമർത്തുക ക്ലോക്ക് to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Operating the Timer

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

7. പരിപാലനം

The Intermatic ST01 timer requires minimal maintenance:

8. പ്രശ്‌നപരിഹാരം

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ടൈമർ ഡിസ്പ്ലേ ശൂന്യമാണ്.ടൈമറിന് പവർ ഇല്ല.Check circuit breaker/fuse. Ensure wiring connections are secure.
Timer does not turn ON/OFF at programmed times.Incorrect programming or timer is in Manual ON/OFF mode.Verify program settings. Ensure timer is in AUTO mode by pressing the മാനുവൽ button until "AUTO" is displayed.
Time or programs are lost after power outage.Internal battery low or depleted.The CR2 lithium battery is designed for long life. If this occurs frequently, the unit may require replacement or professional service.
ബന്ധിപ്പിച്ച ഉപകരണം ഓൺ/ഓഫ് ആകുന്നില്ല.Faulty wiring, faulty load, or timer malfunction.Verify wiring connections. Test the connected device directly. If issues persist, consult a qualified electrician.

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

ഇൻ്റർമാറ്റിക് കസ്റ്റമർ സർവീസ്:

അനുബന്ധ രേഖകൾ - ST01

പ്രീview Intermatic ST01/ST01K/E1600 In-Wall Timer Installation and User Guide
Comprehensive installation and user guide for the Intermatic ST01, ST01K, and E1600 series in-wall timers. Learn about features, ratings, programming, installation, and troubleshooting for these 24/7 programmable timers with astro features.
പ്രീview ഇന്റർമാറ്റിക് ST01 സീരീസ് സെൽഫ്-അഡ്ജസ്റ്റിംഗ് വാൾ സ്വിച്ച് ടൈമർ: ഇൻസ്റ്റാളേഷനും ഉപയോക്തൃ നിർദ്ദേശങ്ങളും
ഇന്റർമാറ്റിക് ST01 സീരീസ് സെൽഫ്-അഡ്ജസ്റ്റിംഗ് വാൾ സ്വിച്ച് ടൈമറിനായുള്ള വയറിംഗ് ഡയഗ്രമുകളും വാറന്റി വിവരങ്ങളും ഉൾപ്പെടെ സമഗ്രമായ ഇൻസ്റ്റാളേഷൻ, പ്രോഗ്രാമിംഗ്, ട്രബിൾഷൂട്ടിംഗ് ഗൈഡ്.
പ്രീview ഇന്റർമാറ്റിക് EJ351 ഇൻഡോർ വാൾ സ്വിച്ച് ടൈമർ: ഇൻസ്റ്റലേഷൻ, പ്രോഗ്രാമിംഗ്, ട്രബിൾഷൂട്ടിംഗ് ഗൈഡ്
ഇന്റർമാറ്റിക് EJ351 ഇൻഡോർ വാൾ സ്വിച്ച് ടൈമർ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രോഗ്രാമിംഗ് ചെയ്യുന്നതിനും ട്രബിൾഷൂട്ടിംഗിനുമുള്ള സമഗ്ര ഗൈഡ്. ഷെഡ്യൂളുകൾ എങ്ങനെ സജ്ജീകരിക്കാമെന്നും ഓട്ടോമാറ്റിക്, മാനുവൽ മോഡുകൾ എങ്ങനെ ഉപയോഗിക്കാമെന്നും പൊതുവായ പ്രശ്നങ്ങൾ പരിഹരിക്കാമെന്നും അറിയുക.
പ്രീview ഇന്റർമാറ്റിക് KM2 സീരീസ് ഇൻ-വാൾ ടൈമർ: ഇൻസ്റ്റാളേഷനും പ്രവർത്തന നിർദ്ദേശങ്ങളും
ഇന്റർമാറ്റിക് KM2 സീരീസ് ഇൻ-വാൾ ടൈമറുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള സമഗ്ര ഗൈഡ്. ലൈറ്റിംഗിന്റെയും മറ്റ് സർക്യൂട്ടുകളുടെയും ഓട്ടോമാറ്റിക് നിയന്ത്രണത്തിനായുള്ള സവിശേഷതകൾ, സവിശേഷതകൾ, പ്രോഗ്രാമിംഗ്, വയറിംഗ് എന്നിവയെക്കുറിച്ച് അറിയുക.
പ്രീview ഇന്റർമാറ്റിക് E-1020 24-മണിക്കൂർ ഓട്ടോമാറ്റിക് ഇൻ-വാൾ ടൈമർ: ഇൻസ്റ്റാളേഷനും പ്രവർത്തന ഗൈഡും
ഇന്റർമാറ്റിക് E-1020 24-മണിക്കൂർ ഓട്ടോമാറ്റിക് ഇൻ-വാൾ മൾട്ടിപ്പിൾ പ്രോഗ്രാം ടൈമർ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള സമഗ്ര ഗൈഡ്. ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ, വയറിംഗ് ഡയഗ്രമുകൾ, വാറന്റി വിശദാംശങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview ഇന്റർമാറ്റിക് E-1010 24-മണിക്കൂർ ഇൻ-വാൾ ടൈമർ ഇൻസ്റ്റാളേഷനും ഓപ്പറേഷൻ ഗൈഡും
ഇന്റർമാറ്റിക് E-1010 24-മണിക്കൂർ ഓട്ടോമാറ്റിക് ഇൻ-വാൾ ടൈമർ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പ്രവർത്തിപ്പിക്കുന്നതിനുമുള്ള വിശദമായ നിർദ്ദേശങ്ങൾ. വയറിംഗ്, മാനുവൽ പ്രവർത്തനം, ഓട്ടോമാറ്റിക് ക്രമീകരണങ്ങൾ, റെസിഡൻഷ്യൽ ഉപയോഗത്തിനുള്ള വാറന്റി വിവരങ്ങൾ എന്നിവ ഉൾക്കൊള്ളുന്നു.