VDO M1.1 WL Digital Bicycle Computer Speedometer User Manual

ആമുഖം

The VDO M1.1 WL Digital Bicycle Computer is a reliable and user-friendly device designed to provide essential cycling data. Its minimalist design ensures ease of use, while its clear display keeps two key functions visible at all times. This manual provides detailed instructions for installation, operation, and maintenance of your VDO M1.1 computer.

പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• VDO M1.1 Bicycle Computer Unit
• Bicycle Mounting Kit (includes bracket, sensor, magnet, and zip ties)
• 3V Battery (CR2032)
• ഉപയോക്തൃ മാനുവൽ

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly install your VDO M1.1 Bicycle Computer:

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ: Open the battery compartment on the back of the computer unit. Insert the included 3V CR2032 battery with the positive (+) side facing up. Close the compartment securely.
2. മൌണ്ടിംഗ് ബ്രാക്കറ്റ്: Attach the mounting bracket to your bicycle's handlebar or stem using the provided zip ties. Ensure it is securely fastened and positioned for easy viewing.
3. സെൻസർ ഇൻസ്റ്റാളേഷൻ: Mount the speed sensor to the front fork of your bicycle. Position it so that the sensor head is aligned with the spokes.
4. മാഗ്നെറ്റ് ഇൻസ്റ്റാളേഷൻ: Attach the spoke magnet to one of the spokes on your front wheel. Adjust its position so that it passes within 5mm of the speed sensor head with each wheel rotation. Ensure the magnet and sensor are aligned.
5. കേബിൾ റൂട്ടിംഗ്: Route the sensor cable along the fork and frame, securing it with zip ties to prevent it from interfering with moving parts or getting snagged. Connect the cable to the computer mounting bracket.
6. Computer Attachment: Slide the VDO M1.1 computer unit onto the mounting bracket until it clicks into place.
7. ചക്ര വലുപ്പ ക്രമീകരണം: It is crucial to set the correct wheel size for accurate speed and distance readings. Refer to the 'Settings Mode' section to input your wheel's circumference. You can measure your wheel's circumference manually for the most accurate result.

Image: The VDO M1.1 WL Digital Bicycle Computer showing a speed of 15.6 km/h and a trip time of 2 hours, 18 minutes, and 48 seconds. The display is clear with large digits, and the VDO logo is visible at the top.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The VDO M1.1 features two primary buttons for operation and settings:

• BIKE Button:
  • In Operating Mode: Press to cycle through different functions (e.g., trip time, daily distance, total distance). Press and hold to reset trip-specific data (e.g., daily distance, trip time).
  • In Setting Mode: Use to browse through the setting menu options and to change the data value that is currently being set.
• SET ബട്ടൺ:
  • In Operating Mode: Press to return to the main speed display from any other function. Press and hold to enter the setting mode.
  • In Setting Mode: Use to open a setting option or to confirm your selected setting.

The computer features an automatic start/stop function that activates after 2 hours of inactivity. Data is stored even when the battery is changed.

പ്രവർത്തനങ്ങൾ

The VDO M1.1 provides the following essential cycling functions:

• Current Speed (displayed in 0.2 km/h increments)
• യാത്ര സമയം
• Daily Distance
• ആകെ ദൂരം
• Time (12/24-hour mode with AM/PM display)

അധിക സവിശേഷതകൾ ഉൾപ്പെടുന്നു:

• Very large, easy-to-read fonts
• Two functions visible simultaneously on the display
• Full text display (English language supported)
• Data storage upon battery change (retains data and settings)
• Low battery status warning
• One adjustable wheel size setting
• Automatic start/stop function (up to 2 hours of inactivity)

മെയിൻ്റനൻസ്

To ensure the longevity and optimal performance of your VDO M1.1 Bicycle Computer, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Wipe the computer unit and sensor with a soft, damp തുണി. അബ്രാസീവ് ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്, കാരണം അവ ഡിസ്പ്ലേയ്‌ക്കോ സി.asing.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: When the low battery warning appears, replace the 3V CR2032 battery promptly. The computer is designed to retain your data and settings during battery changes.
• സംഭരണം: If storing the bicycle for an extended period, consider removing the computer unit to protect it from extreme temperatures or moisture.
• Sensor/Magnet Alignment: Periodically check the alignment of the speed sensor and spoke magnet to ensure they are still within the recommended 5mm distance for accurate readings.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your VDO M1.1, refer to the following common problems and solutions:

• No Speed Reading / Inaccurate Readings:
  • Check the alignment and distance between the speed sensor and the spoke magnet. They should be within 5mm.
  • Ensure the sensor cable is securely connected to the mounting bracket and is not damaged.
  • Verify that the wheel size setting is correct in the computer's settings.
• Display Not Working / Faint Display:
  • Check the battery. If the low battery warning is active or the display is faint, replace the 3V CR2032 battery.
  • Ensure the battery is inserted correctly with the positive (+) side facing up.
• Computer Not Responding to Buttons:
  • സോഫ്റ്റ് റീസെറ്റ് നടത്താൻ ബാറ്ററി നീക്കം ചെയ്ത് വീണ്ടും ചേർക്കുക.
  • Ensure the buttons are not stuck or obstructed.

If problems persist, please contact VDO customer support or your retailer for further assistance.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the warranty card included with your product or consult the retailer from whom you purchased the VDO M1.1. VDO stands behind the quality of its products.

For technical support, troubleshooting assistance, or inquiries about replacement parts, please visit the official VDO webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.