ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine. Please read this manual thoroughly before using the equipment to ensure proper function and to prevent injury or damage.

The TECHNOLOGY TIG 182 is an inverter welding machine designed for TIG (Tungsten Inert Gas) and MMA (Manual Metal Arc) welding processes. It offers both AC (Alternating Current) for aluminum and DC (Direct Current) for steel, stainless steel, copper, and other metals, with High Frequency (HF) and LIFT arc striking options.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Welding can be hazardous. Always follow safety precautions to prevent electric shock, fire, burns, and exposure to fumes and gases. This section outlines general safety guidelines. Refer to local regulations and standards for comprehensive safety information.

• വൈദ്യുതാഘാതം: Ensure the welding machine is properly grounded. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Work in a dry area.
• പുകയും വാതകങ്ങളും: Provide adequate ventilation or use a fume extractor to remove welding fumes and gases from the breathing zone.
• തീയും സ്ഫോടനവും: Keep flammable materials away from the welding area. Have a fire extinguisher readily available. Do not weld on containers that have held flammable materials.
• ആർക്ക് കിരണങ്ങൾ: Wear a welding helmet with appropriate shade filter to protect eyes and face from arc rays. Wear protective clothing to shield skin from UV/IR radiation.
• പൊള്ളലുകൾ: Hot metal and equipment can cause severe burns. Wear heat-resistant gloves and protective clothing. Allow welded materials to cool before handling.
• ശബ്ദം: Welding operations can produce noise. Use hearing protection if noise levels are excessive.
• പരിപാലനം: Disconnect power before performing any maintenance or service on the machine.

3. ഉൽപ്പന്ന ഘടകങ്ങളും സവിശേഷതകളും

The Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine is designed for versatility and performance. Below is an overview of its key components.

ചിത്രം 1: മുന്നിലും താഴെയും view of the Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine. The top section, in red and black, features the control panel with a digital display, various indicator lights, and adjustment knobs. Ventilation grilles are visible on the front. The bottom section, primarily black, shows connection points for welding cables and a gas hose. A sturdy black handle is integrated into the top for portability.

• നിയന്ത്രണ പാനൽ: Features a digital display for current settings, mode selection buttons (AC/DC, HF/LIFT), and adjustment knobs for welding parameters.
• വൈദ്യുതി സ്വിച്ച്: Located on the machine, used to turn the unit on or off.
• Welding Cable Connectors: Standard DINSE connectors for attaching the welding torch and ground clamp.
• ഗ്യാസ് ഇൻലെറ്റ്: Connection point for the inert gas supply (e.g., Argon) required for TIG welding.
• തണുപ്പിക്കൽ വെന്റുകൾ: Designed to dissipate heat and ensure optimal performance and longevity of the internal components.
• ചുമക്കുന്ന ഹാൻഡിൽ: Integrated for easy transport of the machine.

4. സജ്ജീകരണം

സുരക്ഷിതവും ഫലപ്രദവുമായ വെൽഡിങ്ങിന് ശരിയായ സജ്ജീകരണം നിർണായകമാണ്. ഈ ഘട്ടങ്ങൾ ശ്രദ്ധാപൂർവ്വം പാലിക്കുക:

1. പവർ കണക്ഷൻ: Connect the machine's power cord to a suitable 230V AC power outlet. Ensure the outlet is properly grounded and can supply the required ampഇറേജ്.
2. ഗ്രൗണ്ട് Clamp കണക്ഷൻ: ഗ്രൗണ്ട് cl ഘടിപ്പിക്കുകamp cable to the appropriate terminal on the welding machine (usually marked with a ground symbol or '-'). Secure the ground clamp വർക്ക്പീസിലോ വെൽഡിംഗ് ടേബിളിലോ ഉറപ്പിച്ച് ഉറപ്പിക്കുക, നല്ല വൈദ്യുത സമ്പർക്കം ഉറപ്പാക്കുക.
3. TIG Torch Connection: Connect the TIG torch cable to the designated connector on the machine. Ensure all connections are tight.
4. Gas Cylinder Connection (for TIG): Connect the gas hose from the machine's gas inlet to a regulator on an inert gas cylinder (e.g., Argon). Ensure all connections are leak-free. Open the gas cylinder valve slowly.
5. Tungsten Electrode Installation: Insert the appropriate tungsten electrode into the TIG torch collet and tighten the collet body. Ensure the electrode is properly sharpened for the desired welding process.
6. ജോലിസ്ഥലം തയ്യാറാക്കൽ: Clear the welding area of any flammable materials. Ensure adequate ventilation.

5. പ്രവർത്തിക്കുന്നു

Once the machine is set up, you can begin welding. Always wear appropriate Personal Protective Equipment (PPE) before starting.

1. പവർ ഓൺ: Turn on the main power switch of the welding machine. The digital display and indicator lights should illuminate.
2. Select Welding Mode:
   • ടിഐജി എസി: For welding aluminum and magnesium alloys. Use HF start for non-contact arc initiation.
   • ടിഐജി ഡിസി: For welding steel, stainless steel, copper, and other non-ferrous metals (except aluminum). Choose between HF or LIFT arc start.
   • എംഎംഎ: For stick welding.
3. Adjust Welding Parameters: Use the control knobs to set the desired welding current (amperage) based on the material thickness and type of electrode/filler wire. Adjust gas pre-flow/post-flow and other TIG specific parameters as needed.
4. Arc Initiation:
   • HF Start: Position the torch close to the workpiece and press the torch trigger. The arc will initiate without contact.
   • LIFT Arc: Touch the tungsten electrode to the workpiece, then lift it slightly. The arc will initiate.
5. വെൽഡിംഗ്: Maintain a consistent arc length and travel speed. Feed filler wire into the weld puddle as required for TIG welding.
6. പവർ ഓഫ്: After welding, release the torch trigger. Allow the gas post-flow to complete. Turn off the machine's power switch and close the gas cylinder valve.

6. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect the power supply before performing any maintenance.

• വൃത്തിയാക്കൽ: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the cooling vents. Do not use solvents.
• കേബിളും കണക്ടറും പരിശോധന: Regularly inspect welding cables, torch, and ground clamp for signs of wear, damage, or loose connections. Replace damaged components immediately.
• Tungsten Electrode Care: Ensure tungsten electrodes are clean and properly sharpened. Replace worn or contaminated electrodes.
• Gas Hose Inspection: Check the gas hose and connections for leaks or damage.
• സംഭരണം: Store the machine in a clean, dry environment, protected from dust and moisture, when not in use.

7. പ്രശ്‌നപരിഹാരം

This section provides solutions to common issues you might encounter. For problems not listed here, contact qualified service personnel.

8 സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications for the Telwin TECHNOLOGY TIG 182 AC/DC-HF/LIFT 230V welding machine:

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. For technical support, spare parts, or service, please contact Telwin customer service or an authorized service center. Keep your purchase receipt and the product's serial number handy when seeking support.

You can find more information and contact details on the official Telwin webസൈറ്റ്: www.telwin.com