LEDVANCE Sylvania 73743 Lightify Smart Dimming Switch

1. ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of the LEDVANCE Sylvania 73743 Lightify Smart Dimming Switch. This device is designed to control compatible smart lighting systems without requiring a smartphone for basic functions. It can be mounted over an existing light switch or used as a portable remote control.

ചിത്രം 1.1: ഫ്രണ്ട് view of the Sylvania Lightify Smart Dimming Switch. The device features two buttons and an indicator light.

2. പാക്കേജ് ഉള്ളടക്കം

• Sylvania Lightify Smart Dimming Switch (Model 73743)
• Rocker backing plate
• Toggle backing plate
• Solid backing plate
• Battery (1 Lithium Metal, pre-installed)

3. സിസ്റ്റം ആവശ്യകതകൾ

To utilize the full functionality of the Sylvania Lightify Smart Dimming Switch, the following components are required:

• Compatible ZigBee Smart Home Hub (e.g., SmartThings, OSRAM LIGHTIFY Gateway, or other compatible ZigBee hubs). Note: Dimming functionality may not be supported with all hubs (e.g., SmartThings).
• Compatible SMART+ LED Light(s) or group of lights.
• Smartphone with the corresponding smart home hub application for initial setup and advanced configurations.

പ്രധാനപ്പെട്ടത്: This switch is not designed for use with traditional in-wall dimmer switches. ZigBee smart devices do not pair directly with voice control devices such as Amazon Echo Dot or Google Home without an intermediary compatible ZigBee hub.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1. Pairing with a ZigBee Hub

1. Ensure your compatible ZigBee hub is powered on and in pairing mode. Refer to your hub's specific instructions for entering pairing mode.
2. On the Sylvania Smart Dimming Switch, press and hold both buttons simultaneously for approximately 3 seconds until the indicator light flashes.
3. The switch will attempt to pair with the hub. Once successfully paired, the indicator light will typically stop flashing or change color according to your hub's feedback.
4. Use your smartphone application for the ZigBee hub to confirm the switch has been added and to assign it to specific lights or groups.

4.2. Physical Installation (Optional)

The switch can be installed over an existing light switch to prevent accidental power cuts to your smart lights. Choose the appropriate backing plate (rocker, toggle, or solid) for your existing switch type.

ചിത്രം 4.1: The smart dimming switch installed over a standard toggle light switch.

1. Select the backing plate that matches your existing wall switch type (rocker, toggle, or solid).
2. Align the backing plate over your existing light switch.
3. Attach the Sylvania Smart Dimming Switch to the backing plate. The switch is designed to cover and secure the existing switch in the 'ON' position, ensuring continuous power to your smart lights.

Alternatively, the switch can be used as a portable remote control without fixed installation.

ചിത്രം 4.2: The smart dimming switch functioning as a portable remote control on a nightstand.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Sylvania Lightify Smart Dimming Switch features two programmable buttons for controlling your smart lights.

ചിത്രം 5.1: A user interacting with the smart dimming switch.

5.1. അടിസ്ഥാന പ്രവർത്തനങ്ങൾ

• ഓൺ/ഓഫ്: A short press of either the top or bottom button can be programmed to turn your assigned lights on or off.
• മങ്ങുന്നു: Press and hold either the top or bottom button to increase or decrease the brightness of your assigned lights. The specific dimming behavior (e.g., which button dims up/down) is configured through your ZigBee hub's application.

5.2. Programmable Actions

Through your compatible ZigBee hub's application, you can program the two buttons to perform various actions, such as:

• Turning a light or group of lights on/off.
• Setting a specific lighting scene.
• തെളിച്ച നിലകൾ ക്രമീകരിക്കുന്നു.

Refer to your ZigBee hub's documentation for detailed instructions on programming button actions and scenes.

6. പരിപാലനം

6.1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The Sylvania Lightify Smart Dimming Switch is battery-operated and includes one Lithium Metal battery. When the battery level is low, the indicator light may provide a visual alert (refer to your hub's application for specific notifications). To replace the battery:

1. Carefully open the battery compartment on the back of the switch.
2. പഴയ ബാറ്ററി നീക്കം ചെയ്യുക.
3. Insert a new Lithium Metal battery (3 Volts), ensuring correct polarity.
4. ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് സുരക്ഷിതമായി അടയ്ക്കുക.

6.2. വൃത്തിയാക്കൽ

To clean the switch, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.

7. പ്രശ്‌നപരിഹാരം

• പ്രതികരിക്കുന്നില്ല എന്ന സ്വിച്ച്:
  • ബാറ്ററി മാറ്റിസ്ഥാപിക്കേണ്ടതുണ്ടോ എന്ന് പരിശോധിക്കുക.
  • Ensure the switch is within range of your ZigBee hub.
  • Verify that the associated smart lights are powered on and functioning correctly.
  • Attempt to re-pair the switch with your ZigBee hub.
• Dimming not working with SmartThings:
  • Some ZigBee hubs, including certain SmartThings configurations, may not fully support the dimming functionality of this switch. Consult your hub's documentation or community forums for potential workarounds or custom device handlers.
• ജോടിയാക്കുന്നതിലെ ബുദ്ധിമുട്ട്:
  • Ensure your ZigBee hub is in pairing mode.
  • Move the switch closer to the hub during the pairing process.
  • Perform a factory reset on the switch (if applicable, refer to hub documentation or manufacturer support for reset procedures).

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

ഈ ഉൽപ്പന്നം എ 2 വർഷത്തെ ഉൽപ്പന്ന വാറൻ്റി.

For customer questions or support in the US & Canada, please contact LEDVANCE/OSRAM SYLVANIA:

• ഫോൺ: 1-800-LIGHTBULB (1-800-544-4828)
• ഇമെയിൽ: smart@ledvance.com