DB Electrical TRM0079 Tilt Trim Motor Instruction Manual

1. ആമുഖം

This instruction manual provides essential information for the proper installation, operation, and maintenance of your DB Electrical TRM0079 Tilt Trim Motor. Please read this manual thoroughly before attempting any installation or operation to ensure safe and efficient use of the product. This unit is designed as a replacement tilt and trim motor for various marine applications, specifically compatible with Volvo Penta models.

2 സുരക്ഷാ വിവരങ്ങൾ

• Always disconnect the battery before performing any installation or maintenance on the tilt trim motor to prevent electrical shock or accidental operation.
• ഇൻസ്റ്റാളേഷൻ, അറ്റകുറ്റപ്പണികൾ എന്നിവയ്ക്കിടെ സുരക്ഷാ ഗ്ലാസുകൾ, കയ്യുറകൾ എന്നിവയുൾപ്പെടെ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
• Ensure the boat is securely supported and the outdrive is in a safe position before working on the tilt trim system.
• Handle hydraulic fluid with care. Refer to the fluid manufacturer's safety data sheet.
• If you are unsure about any part of the installation or repair process, consult a qualified marine technician.
• ഈ ഉൽപ്പന്നത്തിൽ കാലിഫോർണിയ സംസ്ഥാനത്തിന് ക്യാൻസറിനും ജനന വൈകല്യങ്ങൾക്കും അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന വൈകല്യങ്ങൾക്കും കാരണമാകുമെന്ന് അറിയപ്പെടുന്ന രാസവസ്തുക്കൾ അടങ്ങിയിരിക്കുന്നു (പ്രൊപ്പോസിഷൻ 65 മുന്നറിയിപ്പ്).

3. ഉൽപ്പന്നം കഴിഞ്ഞുview കൂടാതെ സ്പെസിഫിക്കേഷനുകളും

The DB Electrical TRM0079 is a 12-volt replacement tilt and trim motor designed for marine applications. It includes the pump and reservoir as a complete unit.

Figure 3.1: DB Electrical TRM0079 Tilt Trim Motor. This image shows the complete unit, including the electric motor, hydraulic pump, and fluid reservoir, with electrical connections visible.

സാങ്കേതിക സവിശേഷതകൾ:

• യൂണിറ്റ് തരം: Tilt & Trim Motor (Includes Pump & Reservoir)
• വാല്യംtage: 12 വോൾട്ട്
• റൊട്ടേഷൻ: RE (Reverse)
• മൊത്തത്തിലുള്ള അളവുകൾ: Approximately 9" W x 7.5" H (22.86 cm W x 19.05 cm H)
• Motor Body Diameter (OD): 3 ഇഞ്ച് (76.2 മിമി)
• Shaft Diameter (OD): 0.315 ഇഞ്ച് (8 മിമി)
• നീളം: 5.906 ഇഞ്ച് (150 മിമി)
• മെറ്റീരിയൽ: ലോഹം
• ഇനത്തിൻ്റെ ഭാരം: 6.5 പൗണ്ട് (2.95 കി.ഗ്രാം)

Compatible OEM Part Numbers:

• API MARINE: PT408N
• ARROWHEAD: TRM0079
• EMP Units: 4-6806
• ജമ്മു & നേഷൻ: 430-22086
• ലെസ്റ്റർ: 10856
• QUICKSILVER: 8M6007551
• SIERRA MARINE: 18-6806
• VOLVO: 3587079, 3857079, 3857489, 3858069, 3860879
• WAI: 10856N

This unit is compatible with all Volvo Penta models requiring these specifications.

4. ഇൻസ്റ്റലേഷൻ

Proper installation is crucial for the performance and longevity of your tilt trim motor. It is recommended that installation be performed by a qualified marine technician.

പ്രീ-ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. അനുയോജ്യത പരിശോധിക്കുക: Before beginning, confirm that the TRM0079 unit is the correct replacement for your specific marine engine and outdrive model. Compare the specifications and OEM part numbers provided in Section 3 with your existing unit.
2. ഉപകരണങ്ങൾ ശേഖരിക്കുക: Ensure you have all necessary tools, including wrenches, screwdrivers, hydraulic fluid, and a container for draining old fluid.
3. പവർ വിച്ഛേദിക്കുക: Disconnect the boat's battery to prevent accidental electrical activation during installation.
4. Secure Outdrive: Position and secure the outdrive to prevent movement during the removal and installation process.

പഴയ യൂണിറ്റ് നീക്കംചെയ്യൽ:

1. Carefully disconnect the electrical wiring from the old tilt trim motor. Note the wiring configuration for reinstallation.
2. Place a drain pan beneath the unit. Disconnect the hydraulic lines from the old pump. Allow all hydraulic fluid to drain completely.
3. Remove the mounting bolts securing the old tilt trim motor assembly to the transom or mounting bracket.
4. Carefully remove the old unit from the boat.

പുതിയ യൂണിറ്റിന്റെ ഇൻസ്റ്റാളേഷൻ:

1. മൗണ്ടിംഗ്: Position the new DB Electrical TRM0079 unit in the mounting location. Secure it using the appropriate mounting bolts. Ensure all connections are tight and secure.
2. Hydraulic Line Connections: The TRM0079 unit comes with various adapter fittings (silver and brass) and O-rings. It is critical to use the correct adapters and O-rings for a leak-free connection.
   • The silver fittings are generally required.
   • Select the brass fittings that match your original motor's hydraulic lines.
   • Ensure the larger O-ring is placed on the male portion of the silver adapter.
   • Ensure the smaller O-ring is placed on the male hose end that feeds into the brass adapter.
   • Tighten all hydraulic connections firmly but do not overtighten.
3. ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ: Connect the electrical wiring to the new motor, matching the configuration noted during removal. Ensure all connections are clean, secure, and free from corrosion.
4. Fill with Hydraulic Fluid: Fill the reservoir with the recommended hydraulic fluid. For Volvo Penta systems, 10-weight hydraulic oil is typically specified. Dexron ATF (Automatic Transmission Fluid) is often a suitable alternative as it is also a 10-weight hydraulic oil. Do not overfill.
5. Bleed the System: After filling, cycle the tilt and trim system up and down several times to bleed any air from the hydraulic lines. Monitor the fluid level and top off as needed.
6. പവർ വീണ്ടും ബന്ധിപ്പിക്കുക: Reconnect the boat's battery.

5. ഓപ്പറേഷൻ

The DB Electrical TRM0079 Tilt Trim Motor operates by controlling the angle of your boat's outdrive. This allows for optimal performance, fuel efficiency, and shallow water operation.

• Use the designated tilt/trim switch on your boat's control panel to raise or lower the outdrive.
• ട്രിമ്മിംഗ്: Adjusting the outdrive angle while underway to optimize boat performance and ride quality.
• ചരിവ്: Raising the outdrive completely out of the water for trailering, shallow water navigation, or maintenance.
• Avoid operating the trim system continuously for extended periods to prevent overheating.

6. പരിപാലനം

Regular maintenance ensures the longevity and reliable operation of your tilt trim motor.

• ദ്രാവക നില പരിശോധന: Periodically check the hydraulic fluid level in the reservoir. Top off with the recommended 10-weight hydraulic oil (e.g., Dexron ATF) if necessary.
• ചോർച്ചകൾ പരിശോധിക്കുക: Regularly inspect all hydraulic lines and connections for any signs of leaks. Address any leaks immediately to prevent system failure.
• ഇലക്ട്രിക്കൽ കണക്ഷനുകൾ: Check electrical connections for corrosion, looseness, or damage. Clean and tighten as needed.
• പൊതുവായ ശുചീകരണം: Keep the exterior of the motor and reservoir clean from dirt, salt, and debris.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your tilt trim motor.

8. വാറൻ്റിയും പിന്തുണയും

DB Electrical provides a 1-year warranty on this product. This warranty covers manufacturing defects and ensures the product will function flawlessly when installed correctly. In the rare event of a product malfunction within one year of purchase, DB Electrical will replace the unit. For warranty claims or technical support, please contact DB Electrical customer service.

For further assistance, please refer to the official DB Electrical webസൈറ്റിൽ പ്രവേശിക്കുക അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ പിന്തുണയുമായി നേരിട്ട് ബന്ധപ്പെടുക.