2.5" SATA/SAS HDD/SSD ഉപയോക്തൃ മാനുവലിനുള്ള സിൽവർസ്റ്റോൺ SST-FS202 നീക്കം ചെയ്യാവുന്ന കേസ്

ആമുഖം

The SilverStone SST-FS202 is a versatile removable case designed to optimize space and convenience for computer users. This 3.5" device bay solution allows for the installation of two 2.5" SAS/SATA hard disk drives or solid-state drives. Featuring a durable aluminum construction and a hot-swap design, it provides easy drive management and enhanced data security with individual key locks for each drive.

ഉൽപ്പന്ന സവിശേഷതകൾ

• Dual Drive Support: Accommodates two 2.5" SAS/SATA drives (HDD or SSD) within a single 3.5" device bay.
• മെച്ചപ്പെടുത്തിയ സുരക്ഷ: Features individual metal key locks for each drive bay, providing extra security for your data.
• പ്രീമിയം നിർമ്മാണം: Constructed with an all-aluminum body and a refined hairline brushed finish for durability and aesthetics.
• ഹോട്ട്-സ്വാപ്പ് പ്രവർത്തനം: Fully supports SATA hot-swap, allowing drives to be inserted or removed without system shutdown.
• Trayless & Screwless Design: Simplifies drive installation and removal, eliminating the need for trays or screws.
• Independent Drive Status LED: Each drive bay includes an independent LED indicator to show power and access status.
• ഉയർന്ന ഡാറ്റാ ട്രാൻസ്ഫർ നിരക്ക്: Supports data transfer rates up to 6 Gbit/s (dependent on drive speed).

പാക്കേജ് ഉള്ളടക്കം

• 1x SilverStone SST-FS202 Removable Case
• 2x Keys for drive locks
• മൗണ്ടിംഗ് സ്ക്രൂകൾ
• ഉപയോക്തൃ മാനുവൽ

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. Physical Installation into PC Case

1. Identify an available 3.5" device bay in your computer case.
2. Slide the SST-FS202 into the 3.5" bay until it is flush with the front panel.
3. Secure the case using the provided mounting screws through the side screw holes into the drive bay.

2. Drive Installation (2.5" SAS/SATA HDD/SSD)

1. Unlock the drive bay lever using the provided key and pull the lever outwards to open the bay.
2. Gently slide your 2.5" SAS or SATA HDD/SSD into the open bay. Ensure the drive is oriented correctly so the connectors align with the backplane.
3. Push the drive firmly until it seats completely into the connectors.
4. Close the drive bay lever and lock it with the key for security.

3. കേബിൾ കണക്ഷനുകൾ

1. Connect the SATA data cables from the SST-FS202's rear ports to your motherboard's SATA ports.
2. Connect the SATA power cable from your power supply unit (PSU) to the SST-FS202's rear power port.

ഓപ്പറേഷൻ

• പവർ ഓൺ: Once connected, power on your computer. The drive status LEDs on the front panel will illuminate (blue for power, blinking blue for access).
• Hot-Swap: The SST-FS202 supports hot-swapping. To remove a drive, ensure it is safely ejected or unmounted from your operating system first. Then, unlock the bay with the key, pull the lever, and carefully slide the drive out.
• Inserting Drives: To insert a new drive, follow the drive installation steps outlined above. The system should detect the new drive automatically.

മെയിൻ്റനൻസ്

• Keep the unit clean and free from dust to ensure optimal airflow and prevent overheating.
• കേബിൾ കണക്ഷനുകൾ സുരക്ഷിതമാണെന്ന് ഉറപ്പാക്കാൻ പതിവായി പരിശോധിക്കുക.
• തീവ്രമായ താപനിലയിലോ ഈർപ്പത്തിലോ യൂണിറ്റിനെ തുറന്നുകാട്ടുന്നത് ഒഴിവാക്കുക.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

For more detailed information, please visit the official product page: SilverStone SST-FS202 Product Page

വാറൻ്റി & പിന്തുണ

SilverStone products are designed for reliability and performance. For warranty information, technical support, or to register your product, please visit the official SilverStone webസൈറ്റ് അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുക.

You can also find more products and information at the SilverStone Amazon Store.