Parkside High-Pressure Cleaner Gun and Nozzle Kit Instruction Manual

1. ആമുഖം

This manual provides essential information for the safe and effective use of your Parkside High-Pressure Cleaner Gun and Nozzle Kit. Please read these instructions carefully before assembly, operation, or maintenance. Keep this manual for future reference.

1.1 പാക്കേജ് ഉള്ളടക്കം

• 1 x High-Pressure Spray Gun (Part No. 91097260)
• 1 x Jet Tube with High-Pressure Nozzle (Dirt Blaster) (Part No. 91097404)

This image displays the two main components of the kit: the black and yellow high-pressure spray gun at the top, and the black dirt blaster jet tube with a high-pressure nozzle at the bottom.

2. പൊതു സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. High-pressure cleaners can be dangerous if not used correctly.

• എല്ലാ നിർദ്ദേശങ്ങളും വായിക്കുക: Familiarize yourself with the operation and warnings of both this kit and your high-pressure cleaner.
• ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE) ധരിക്കുക: This includes safety glasses, hearing protection, and protective footwear.
• Never point the spray gun at people, animals, or electrical equipment: The high-pressure jet can cause serious injury.
• Ensure secure connections: Before operating, verify that all connections between the gun, nozzle, and high-pressure cleaner are tight and secure.
• Do not modify the product: ഏതൊരു പരിഷ്കാരവും സുരക്ഷയിൽ വിട്ടുവീഴ്ച ചെയ്യുകയും വാറന്റി അസാധുവാക്കുകയും ചെയ്യും.
• കുട്ടികളെയും അടുത്തിരിക്കുന്നവരെയും അകറ്റി നിർത്തുക: Maintain a safe distance from the operating area.
• വൈദ്യുതി ബന്ധം വിച്ഛേദിക്കുക: Always disconnect the high-pressure cleaner from the power supply before performing any maintenance or assembly.

3 അനുയോജ്യത

This Parkside High-Pressure Cleaner Gun and Nozzle Kit is specifically designed for use with the following Parkside PHD 150 series high-pressure cleaners:

• Parkside High-Pressure Cleaner PHD 150 A1 (IAN 55991 + 68584)
• Parkside High-Pressure Cleaner PHD 150 B2 (IAN 78960)
• Parkside High-Pressure Cleaner PHD 150 C2 (IAN 93482)
• Parkside High-Pressure Cleaner PHD 150 D3 (IAN 102798 + 270433)

പ്രധാന കുറിപ്പ്: This kit is അല്ല suitable for the original PHD 150 model or any models in the PHD100XX series. Please verify your high-pressure cleaner's model and IAN number for compatibility before use.

4. സജ്ജീകരണവും അസംബ്ലിയും

Follow these steps to correctly assemble the high-pressure gun and nozzle with your compatible Parkside high-pressure cleaner.

1. Prepare the High-Pressure Cleaner: Ensure your high-pressure cleaner is switched off and disconnected from the power supply. Release any residual pressure in the system by briefly pressing the trigger on the old gun (if attached).
2. Connect the High-Pressure Hose to the Gun: Take the new high-pressure spray gun. Connect the high-pressure hose from your cleaner to the inlet on the gun handle. Twist or push until it clicks securely into place, depending on your cleaner's connection type. Ensure a tight, leak-free connection.
3. Attach the Jet Tube with Nozzle: Insert the jet tube with the dirt blaster nozzle into the front end of the spray gun. Push firmly and twist clockwise until it locks into position. Verify that the nozzle is securely attached and cannot be easily pulled out.
4. ചോർച്ച പരിശോധിക്കുക: Before starting the cleaner, connect the water supply and briefly turn it on (without power to the cleaner) to check for any leaks at the connections. Tighten if necessary.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the gun and nozzle are correctly assembled and connected to your high-pressure cleaner, follow these general operating guidelines:

• ക്ലീനർ ആരംഭിക്കുക: Ensure the water supply is fully open. Turn on your high-pressure cleaner.
• ട്രിഗർ ഇടപഴകുക: Point the nozzle away from yourself and others. Press the trigger on the spray gun to begin the high-pressure water flow.
• Dirt Blaster Nozzle: The included dirt blaster nozzle provides a powerful, rotating jet for stubborn dirt and grime. Hold it at an appropriate distance from the surface to avoid damage.
• നിയന്ത്രണം നിലനിർത്തുക: The high-pressure jet can create recoil. Hold the gun firmly with both hands to maintain control.
• പ്രവർത്തനം നിർത്തൽ: To stop the water flow, release the trigger. For extended breaks or when finished, switch off the high-pressure cleaner and disconnect it from the power supply.
• Release Residual Pressure: After switching off the cleaner, briefly press the trigger to release any remaining pressure in the system before disconnecting hoses or attachments.

6. പരിപാലനവും പരിചരണവും

Proper maintenance ensures the longevity and optimal performance of your high-pressure gun and nozzle kit.

• വൃത്തിയാക്കൽ: After each use, rinse the gun and nozzle with clean water to remove any detergent residue or debris.
• നോസൽ വൃത്തിയാക്കൽ: If the nozzle becomes clogged, use the provided nozzle cleaning needle (usually supplied with the high-pressure cleaner) to clear any blockages.
• കണക്ഷനുകൾ പരിശോധിക്കുക: Regularly check all connections for wear, damage, or leaks. Replace worn O-rings or seals as needed.
• സംഭരണം: Store the gun and nozzle in a clean, dry, and frost-free environment. Protect them from direct sunlight and extreme temperatures.
• മരവിപ്പിക്കുന്നത് ഒഴിവാക്കുക: Ensure all water is drained from the gun and nozzle before storing in freezing conditions to prevent damage.

7. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with the high-pressure gun and nozzle.

8 സാങ്കേതിക സവിശേഷതകൾ

9. വാറൻ്റിയും പിന്തുണയും

This product is covered by the standard manufacturer's warranty. Please refer to the warranty documentation provided with your original high-pressure cleaner for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact Parkside customer service or your authorized dealer. Keep your purchase receipt and product model information readily available.