ക്രാഫ്റ്റ്സ്മാൻ 180552

Craftsman 180552 14-inch Walk-Behind Mower Replacement Wheels User Manual

ആമുഖം

This manual provides essential instructions for the safe and correct installation and maintenance of your Craftsman 180552 replacement wheels. These wheels are designed for 14-inch walk-behind lawn mowers from brands such as Poulan, Husqvarna, and AYP, replacing part number 151138. Please read this manual thoroughly before proceeding with installation.

സുരക്ഷാ വിവരങ്ങൾ

പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

This section guides you through the process of replacing the wheels on your walk-behind lawn mower.

ആവശ്യമായ ഉപകരണങ്ങൾ:

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

  1. പുതപ്പ് തയ്യാറാക്കുക: Ensure the lawn mower is turned off, the spark plug wire is disconnected, and the engine is cool. Tilt the mower onto its side (with the carburetor facing up to prevent fuel leakage) or use a sturdy jack to elevate the side where the wheel will be replaced.
  2. പഴയ വീൽ നീക്കം ചെയ്യുക:
    • Locate the center cap or nut cover on the old wheel. Carefully pry it off with a flathead screwdriver if present.
    • Using the appropriate wrench or socket, loosen and remove the nut or bolt securing the wheel to the axle.
    • Slide the old wheel off the axle. Note the position of any washers or spacers for reinstallation.
  3. പുതിയ വീൽ ഇൻസ്റ്റാൾ ചെയ്യുക:
    Two Craftsman 180552 14-inch replacement wheels for walk-behind lawn mowers, shown from the side with tread visible.

    Image: Two Craftsman 180552 14-inch replacement wheels. These wheels are designed for durability and proper fit on compatible lawn mowers.

    • Align the new Craftsman 180552 wheel with the axle. Ensure any washers or spacers are correctly positioned as they were with the old wheel.
    • Slide the new wheel onto the axle.
    • Secure the wheel with the original nut or bolt. Tighten it firmly with the wrench or socket. Do not overtighten, as this can damage the wheel or axle.
    • If applicable, replace the center cap or nut cover.
  4. ഇൻസ്റ്റലേഷൻ പരിശോധിക്കുക: Gently spin the newly installed wheel to ensure it rotates freely without binding. Lower the mower and check for stability.

പ്രവർത്തിക്കുന്നു

Once the new wheels are installed, ensure they are functioning correctly before operating the lawn mower. The wheels should roll smoothly and provide adequate traction. If you notice any wobbling, binding, or unusual noises, re-check the installation steps and ensure all fasteners are securely tightened.

മെയിൻ്റനൻസ്

ട്രബിൾഷൂട്ടിംഗ്

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
ചക്രം ഇളകുകയോ അയഞ്ഞിരിക്കുകയോ ചെയ്യുന്നുNut/bolt not tightened sufficiently; incorrect washer placement.Ensure the securing nut/bolt is tightened properly. Verify washers/spacers are correctly installed.
Wheel does not spin freelyOvertightened nut/bolt; debris caught in axle; incorrect installation.Loosen the nut/bolt slightly if overtightened. Clean any debris from the axle area. Re-check installation steps.
ചക്രത്തിൽ നിന്ന് അസാധാരണമായ ശബ്ദംDebris in wheel hub; damaged wheel bearing (if applicable); loose components.Inspect for and remove any debris. If noise persists, consult a qualified service technician.

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the original purchase documentation or contact the retailer where the product was purchased. Specific warranty terms may vary.

അനുബന്ധ രേഖകൾ - 180552

പ്രീview ക്രാഫ്റ്റ്സ്മാൻ 21" പുൽത്തകിടി വെട്ടുന്നയാൾക്കുള്ള ഓപ്പറേറ്ററുടെ മാനുവൽ
247.39775, 247.37815, 247.37833, 247.37860 എന്നീ മോഡലുകൾക്കായുള്ള സുരക്ഷാ നിർദ്ദേശങ്ങൾ, അസംബ്ലി, പ്രവർത്തനം, അറ്റകുറ്റപ്പണി, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ ഉൾക്കൊള്ളുന്ന ക്രാഫ്റ്റ്സ്മാൻ 21" ലോൺ മോവറിനായുള്ള ഓപ്പറേറ്ററുടെ മാനുവൽ. സുരക്ഷിതമായ പ്രവർത്തനം, ക്രമീകരണങ്ങൾ, പരിചരണം എന്നിവയെക്കുറിച്ചുള്ള വിശദമായ ഗൈഡുകൾ ഉൾപ്പെടുന്നു.
പ്രീview കരകൗശല വിദഗ്ധൻ പുൽത്തകിടി യന്ത്രത്തിന്റെ വാറന്റിയും സേവന വിവരങ്ങളും
ക്രാഫ്റ്റ്സ്മാൻ ബ്രാൻഡഡ് പുൽത്തകിടി വെട്ടുന്ന യന്ത്രങ്ങൾക്കുള്ള ഔദ്യോഗിക വാറന്റിയും സർവീസ് സപ്ലിമെന്റും, ഉൽപ്പന്ന സവിശേഷതകൾ, മോഡൽ നമ്പറുകൾ, വാറന്റി കവറേജ്, പരിമിതികൾ, MTD LLC നൽകുന്ന ബന്ധപ്പെടാനുള്ള വിവരങ്ങൾ എന്നിവ വിശദമാക്കുന്നു.
പ്രീview ക്രാഫ്റ്റ്സ്മാൻ 6.0 HP 22" റിയർ ഡിസ്ചാർജ് റോട്ടറി ലോൺ മോവർ ഓണേഴ്‌സ് മാനുവൽ (മോഡൽ 917.377130)
CRAFTSMAN 6.0 HP 22" റിയർ ഡിസ്ചാർജ് റോട്ടറി ലോൺ മോവറിനായുള്ള (മോഡൽ 917.377130) സമഗ്രമായ ഉടമയുടെ മാനുവൽ. സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ, അസംബ്ലി, പ്രവർത്തനം, അറ്റകുറ്റപ്പണി, ട്രബിൾഷൂട്ടിംഗ്, ഭാഗങ്ങളുടെ അറ്റകുറ്റപ്പണി വിവരങ്ങൾ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ക്രാഫ്റ്റ്സ്മാൻ ലോൺ മോവർ വാറണ്ടിയും സർവീസ് സപ്ലിമെന്റും
ക്രാഫ്റ്റ്സ്മാൻ പുൽത്തകിടി യന്ത്രങ്ങൾക്കായുള്ള സമഗ്രമായ വാറന്റി, സേവന വിവരങ്ങൾ, കവറേജ്, ഒഴിവാക്കലുകൾ, സേവനം എങ്ങനെ നേടാം, പ്രധാനപ്പെട്ട ഉൽപ്പന്ന സവിശേഷതകൾ എന്നിവയെക്കുറിച്ചുള്ള വിശദമായ വിവരങ്ങൾ ഈ പ്രമാണം നൽകുന്നു. വിവിധ തരം പുൽത്തകിടി യന്ത്രങ്ങളുടെ മോഡൽ നമ്പറുകളും വിവരണങ്ങളും ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview ക്രാഫ്റ്റ്സ്മാൻ മോവർ 247.374300 പാർട്സ് ലിസ്റ്റും എഞ്ചിൻ ഘടകങ്ങളും
മോഡൽ 09P602-0039-F1-നുള്ള എഞ്ചിൻ ഘടകങ്ങളുടെ വിശദമായ തകർച്ച ഉൾപ്പെടെ, ക്രാഫ്റ്റ്സ്മാൻ മോവർ മോഡൽ 247.374300-നുള്ള ഭാഗങ്ങളുടെ സമഗ്രമായ പട്ടിക. എല്ലാ മോവർ, എഞ്ചിൻ ഭാഗങ്ങൾക്കുമുള്ള ഭാഗ നമ്പറുകളും വിവരണങ്ങളും കണ്ടെത്തുക.
പ്രീview ക്രാഫ്റ്റ്സ്മാൻ 917.379202 റോട്ടറി ലോൺ മോവർ ഉടമയുടെ മാനുവൽ
ക്രാഫ്റ്റ്സ്മാൻ 917.379202 റോട്ടറി ലോൺ മോവർ മെഷീനിനായുള്ള സമഗ്രമായ ഉടമയുടെ മാനുവൽ, ഒപ്റ്റിമൽ പ്രകടനത്തിനും ദീർഘായുസ്സിനുമായി സുരക്ഷ, പ്രവർത്തനം, പരിപാലനം, ട്രബിൾഷൂട്ടിംഗ് എന്നിവ വിശദമാക്കുന്നു.