ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your dooya Wired/Wireless Roller Shutter Control System. This system is designed to centralize and control multiple roller shutters, offering both wired and wireless control options for enhanced convenience and flexibility.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The dooya Roller Shutter Control System includes the following components:
- 5 x DC318 Radio Wall Receivers
- 1 x DC251 5-Channel Remote Control
Figure 1: Complete dooya Roller Shutter Control System components.
ഘടകങ്ങൾ
DC318 Radio Wall Receiver
The DC318 is a wired wall-mounted receiver that converts your existing wired shutter controls into radio-controlled units. Each receiver supports up to 20 different channels, allowing for flexible grouping of shutters. It features integrated buttons for Up, Down, and Stop operations.
Figure 2: DC318 Radio Wall Receiver.
DC251 5-Channel Remote Control
The DC251 is a wireless remote control designed to operate the DC318 receivers. It features 5 distinct channels, enabling you to control individual shutters or pre-defined groups of shutters. The remote allows for easy selection and command of your roller shutters.
Figure 3: DC251 5-Channel Remote Control.
സജ്ജമാക്കുക
1. Installation of DC318 Radio Wall Receivers
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Before beginning any electrical work, ensure the main power supply to the roller shutter circuit is disconnected at the circuit breaker.
- വയറിംഗ്: Connect the DC318 receiver to your existing wired roller shutter motor and power supply according to the wiring diagram provided in the full product manual. The receiver is designed to fit into standard junction boxes.
- മൗണ്ടിംഗ്: Securely mount the DC318 receiver within the junction box.
- പവർ പുനഃസംയോജനം: Once all connections are secure and verified, restore power to the circuit.
2. Battery Installation for DC251 Remote Control
The DC251 remote control requires one 12V27A battery (not included).
- Locate the battery compartment on the back of the DC251 remote control.
- കമ്പാർട്ട്മെന്റ് കവർ തുറക്കുക.
- Insert the 12V27A battery, ensuring correct polarity (+/-).
- ബാറ്ററി കമ്പാർട്ട്മെൻ്റ് കവർ സുരക്ഷിതമായി അടയ്ക്കുക.
3. Programming and Pairing
The programming and pairing process links the DC251 remote control with the DC318 receivers. This allows the remote to send commands to your roller shutters. Detailed programming steps are crucial for proper functionality and are typically found in the comprehensive manual accompanying the product. Generally, the process involves:
- Entering a programming mode on the DC318 receiver (often by pressing a hidden button or specific sequence).
- Sending a pairing signal from the DC251 remote control on the desired channel.
- Confirming successful pairing (e.g., motor jog, LED indicator).
- Repeating for each DC318 receiver and desired channel/group configuration.
Each DC318 receiver can be assigned to one of 20 available channels, allowing for complex grouping scenarios. Refer to the full product manual for precise programming instructions for your specific setup.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Using the DC318 Radio Wall Receiver Buttons
- Up Button (⌃): Press to raise the roller shutter.
- Down Button (⌄): Press to lower the roller shutter.
- Stop Button (—): Press to stop the roller shutter at its current position.
Using the DC251 5-Channel Remote Control
- ചാനൽ തിരഞ്ഞെടുക്കൽ: Use the channel selection buttons (usually indicated by arrows or numbers) to choose the desired channel (1-5). Each channel can control an individual shutter or a pre-programmed group of shutters.
- Up Button (⌃): Press to raise the roller shutter(s) assigned to the selected channel.
- Down Button (⌄): Press to lower the roller shutter(s) assigned to the selected channel.
- Stop Button (—): Press to stop the roller shutter(s) at their current position.
The remote control allows for flexible management of your roller shutters, enabling you to operate them individually or in groups as configured during the programming phase.
മെയിൻ്റനൻസ്
- Battery Replacement (DC251 Remote): When the remote control's range decreases or it becomes unresponsive, replace the 12V27A battery. Follow the battery installation steps in the "Setup" section.
- വൃത്തിയാക്കൽ: Clean the surfaces of the wall receivers and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- പരിസ്ഥിതി വ്യവസ്ഥകൾ: Ensure the devices are not exposed to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Shutter does not respond to remote control. |
|
|
| Shutter responds intermittently. |
|
|
| Wall receiver buttons do not work. |
|
|
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | dooya |
| മോഡൽ നമ്പർ | dc1092515 |
| ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ | 5 x DC318 Radio Receivers, 1 x DC251 Remote Control |
| കണക്റ്റിവിറ്റി ടെക്നോളജി | വയർ, വയർലെസ്സ് |
| Power Source (DC318) | Wired (to shutter motor power supply) |
| Power Source (DC251) | 12V27A Battery (not included) |
| നിയന്ത്രണ രീതി | Remote Control, Manual Buttons on Receiver |
| Remote Control Channels | 5 ചാനലുകൾ |
| റിസീവർ ചാനലുകൾ | 20 Channels per receiver (for grouping) |
| ഇനത്തിൻ്റെ ഭാരം | 900 grams (total package) |
വാറൻ്റിയും പിന്തുണയും
Information regarding product warranty and dedicated customer support is not available in this document. Please refer to the original product packaging, the comprehensive manual included with your purchase, or the official dooya website for detailed warranty terms and contact information for technical support.
