Jamara 061263 2.4 GHz Receiver FCX 6 Pro Tel Sensor Instruction Manual

ആമുഖം

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Jamara 061263 2.4 GHz Receiver FCX 6 Pro Tel Sensor. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

സുരക്ഷാ നിർദ്ദേശങ്ങൾ

ഉൽപ്പന്നത്തിന് പരിക്കേൽക്കുകയോ കേടുപാടുകൾ സംഭവിക്കുകയോ ചെയ്യാതിരിക്കാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും പാലിക്കുക:

• This product is not a toy. It is intended for use with remote-controlled models and should be handled by individuals aged 14 years and up.
• Ensure correct polarity when connecting power to the receiver. Incorrect connections can cause permanent damage.
• Do not expose the receiver to moisture, extreme temperatures, or direct sunlight.
• Avoid strong impacts or vibrations, which can damage internal components.
• Always perform a range check before operating your model to ensure reliable signal reception.
• Disconnect power from the receiver when not in use or during maintenance.

പാക്കേജ് ഉള്ളടക്കം

നിങ്ങളുടെ പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• 1x Jamara 061263 2.4 GHz Receiver FCX 6 Pro Tel Sensor
• നിർദ്ദേശ മാനുവൽ (ഈ പ്രമാണം)

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Jamara 061263 receiver is a 6-channel 2.4 GHz receiver designed for use with Jamara FCX-6Pro Tel transmitters. It features an automatic frequency hopping digital system for reliable communication.

Figure 1: Jamara 061263 2.4 GHz Receiver
This image displays the Jamara 061263 2.4 GHz receiver. Key features visible include the "LED" indicator, "UPDATE" port, "ProTel" branding, "JAMARA GERMANY" logo, "6 CHANNELS" and "2.4GHZ RECEIVER" labels. On the right side, connection ports are labeled: "B/VCC" (Battery/Voltage Common Collector), "I-BUS", "SENS" (Sensor), and individual channels "CH1" through "CH6". The receiver also indicates "AUTOMATIC FREQUENCY HOPPING DIGITAL SYSTEM". Two grey antenna wires extend from the left side of the unit.

പ്രധാന ഘടകങ്ങൾ:

• LED സൂചകം: Provides status feedback (e.g., power, binding status).
• UPDATE Port: ഫേംവെയർ അപ്ഡേറ്റുകൾക്കായി ഉപയോഗിക്കുന്നു.
• Channel Ports (CH1-CH6): Connect servos, ESCs, and other control devices.
• B/VCC Port: Power input for the receiver.
• I-BUS Port: For digital serial bus communication.
• SENS Port: For connecting telemetry sensors.
• ആന്റിന: Two antenna wires for optimal signal reception.

സജ്ജമാക്കുക

Follow these steps to set up your Jamara 061263 receiver:

1. മൗണ്ടിംഗ്: Securely mount the receiver in your model, ensuring the antennas are positioned away from metal parts and carbon fiber, ideally at a 90-degree angle to each other for best reception.
2. പവർ കണക്ഷൻ: Connect a suitable power source (4.0-6.5V DC) to the B/VCC port. Ensure correct polarity.
3. Servo/ESC Connections: Connect your servos and Electronic Speed Controllers (ESCs) to the appropriate channel ports (CH1-CH6) as per your model's requirements and transmitter setup.
4. ബൈൻഡിംഗ് നടപടിക്രമം:
   • Ensure your Jamara FCX-6Pro Tel transmitter is turned off.
   • Power on the receiver. The LED indicator will typically flash, indicating it's in binding mode or waiting for a signal.
   • Refer to your Jamara FCX-6Pro Tel transmitter manual for its specific binding procedure. Generally, this involves holding a bind button on the transmitter while powering it on, or selecting a bind function from the transmitter's menu.
   • Once bound, the receiver's LED should turn solid, indicating a successful connection.
   • Turn off both the transmitter and receiver, then power them on again in the correct sequence (transmitter first, then receiver) to confirm the binding.
5. Telemetry Sensor Connection (Optional): If using telemetry sensors, connect them to the SENS port. Refer to the sensor's manual for specific connection details.

ഓപ്പറേഷൻ

Once the receiver is successfully bound to your transmitter and all components are connected, you can begin operating your model. Always ensure the transmitter is powered on before the receiver to prevent unintended control inputs.

• പവർ ഓൺ സീക്വൻസ്: Always turn on your transmitter first, then power on the model (and thus the receiver).
• വിമാന യാത്രയ്ക്ക് മുമ്പുള്ള പരിശോധന: Before each use, verify that all control surfaces and functions respond correctly to transmitter inputs. Check battery levels of both the transmitter and the model.
• റേഞ്ച് ചെക്ക്: Perform a range check in an open area to ensure reliable signal reception at a safe distance.
• പവർ ഓഫ് ക്രമം: Always power off the model (receiver) first, then turn off your transmitter.

മെയിൻ്റനൻസ്

Proper maintenance ensures the longevity and reliability of your receiver:

• വൃത്തിയാക്കൽ: Keep the receiver clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
• സംഭരണം: Store the receiver in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
• ആന്റിന കെയർ: Do not bend or crimp the antenna wires excessively. Ensure they are not cut or damaged.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: Periodically check the Jamara website for any available firmware updates for your receiver. Use the UPDATE port and follow the manufacturer's instructions for updating.

ട്രബിൾഷൂട്ടിംഗ്

നിങ്ങളുടെ റിസീവറിൽ പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും പരിശോധിക്കുക:

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please contact Jamara directly through their official webസൈറ്റ് അല്ലെങ്കിൽ അംഗീകൃത വിതരണക്കാർ. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

For further assistance, visit the official Jamara webസൈറ്റ്: www.jamara.com