1. ആമുഖം
This instruction manual provides essential information for the proper installation, use, and maintenance of your Brandt Universal Refrigerator Handle. Please read this manual thoroughly before installation and retain it for future reference. This handle is designed as a generic replacement part for various Brandt refrigerator models, ensuring compatibility and functionality.
2 സുരക്ഷാ വിവരങ്ങൾ
- Always disconnect power to the refrigerator before attempting any installation or repair.
- പരിക്ക് തടയാൻ കയ്യുറകൾ പോലുള്ള ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
- ഏതെങ്കിലും ഘട്ടത്തെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു ടെക്നീഷ്യനെ സമീപിക്കുക.
- ശ്വാസംമുട്ടൽ ഉണ്ടാകുന്നത് തടയാൻ ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
3. പാക്കേജ് ഉള്ളടക്കം
പാക്കേജ് തുറക്കുമ്പോൾ എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.
- 1 x Brandt Universal Refrigerator Handle (Metallic Silver)
- Note: Mounting screws or hardware may not be included and might need to be reused from the original handle or purchased separately.

ചിത്രം 1: The Brandt Universal Refrigerator Handle. This image displays the metallic silver handle with its oblong shape and white end caps, ready for installation.
4. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ
Follow these steps carefully to install the refrigerator handle. The process may vary slightly depending on your specific refrigerator model.
- പ്രദേശം തയ്യാറാക്കുക: Ensure the refrigerator door is clean and free of debris where the handle will be mounted.
- പഴയ ഹാൻഡിൽ നീക്കം ചെയ്യുക (ബാധകമെങ്കിൽ): If replacing an existing handle, locate the mounting screws. These are typically found on the inside edge of the door or under decorative caps on the handle itself. Use an appropriate screwdriver to remove them. Carefully detach the old handle.
- Align the New Handle: Position the new Brandt Universal Refrigerator Handle over the existing mounting holes on the refrigerator door. Ensure the center-to-center spacing of 200mm aligns correctly with your door's mounting points.
- ഹാൻഡിൽ സുരക്ഷിതമാക്കുക: Insert the mounting screws (reusing old ones if compatible, or using new ones of the correct size) through the handle's mounting points and into the door. Tighten the screws firmly but do not overtighten, as this can strip the threads or damage the handle/door.
- ഇൻസ്റ്റലേഷൻ പരിശോധിക്കുക: Gently pull on the newly installed handle to ensure it is securely attached and does not wobble.
For models where the mounting points are not visible, refer to your refrigerator's specific service manual for handle removal and installation procedures.
5. Operating the Handle
The Brandt Universal Refrigerator Handle is designed for simple and reliable operation. To open the refrigerator door, grasp the handle firmly and pull gently. Avoid excessive force or sudden jerking motions, as this can stress the mounting points and potentially damage the handle or door.
6. പരിപാലനം
To ensure the longevity and appearance of your refrigerator handle, follow these maintenance guidelines:
- വൃത്തിയാക്കൽ: മൃദുവായ തുണി ഉപയോഗിച്ച് ഹാൻഡിൽ പതിവായി തുടയ്ക്കുക dampened with mild soap and water. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can scratch or damage the metallic finish.
- പരിശോധന: Periodically check the handle for any signs of looseness. If the handle feels loose, gently tighten the mounting screws. Do not overtighten.
- ആഘാതം ഒഴിവാക്കുക: Protect the handle from impacts or heavy objects that could cause dents or structural damage.
7. പ്രശ്നപരിഹാരം
- Handle is loose:
സാധ്യമായ കാരണം: Mounting screws have loosened over time.
പരിഹാരം: Locate the mounting screws (usually on the inside of the door or under caps) and carefully tighten them with an appropriate screwdriver. Do not overtighten.
- Handle is difficult to install:
സാധ്യമായ കാരണം: Incorrect alignment or incompatible mounting holes.
പരിഹാരം: Double-check the center-to-center spacing (200mm) of the handle against your refrigerator door's mounting points. Ensure the handle is oriented correctly. If the holes do not align, this handle may not be compatible with your specific refrigerator model, or additional adapters might be required (not included).
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | ബ്രാൻഡ് |
| മോഡൽ നമ്പർ | 480132101115 |
| ടൈപ്പ് ചെയ്യുക | Universal Refrigerator Handle |
| നിറം | മെറ്റാലിക് സിൽവർ |
| മെറ്റീരിയൽ | മെറ്റൽ, സ്റ്റെയിൻലെസ് സ്റ്റീൽ |
| ആകൃതി | ദീർഘചതുരം |
| മധ്യഭാഗം മുതൽ മധ്യഭാഗം വരെയുള്ള ദൂരം | 200 മി.മീ |
| കഷണങ്ങളുടെ എണ്ണം | 1 |
| അനുയോജ്യമായ മോഡലുകൾ | SF26201, SF2620/1, SF26710, SL28710, ZFA1715, ZFA1715/1, ZFA17151, FFA1650, FFA1670, SF26810, UD2024, UL2021, UL2321, ULN2200, ULN2201, ULN2500, ULN2501, SL28200-1, SL2820, SL28201, CEN31221E, CEN3122, 46X4146, 46X3612, 46X5382 (and others with 200mm spacing) |
9. വാറൻ്റിയും പിന്തുണയും
Information regarding specific warranty terms for this Brandt Universal Refrigerator Handle (Model 480132101115) is not available in the provided product details. For warranty inquiries or technical support, please contact the retailer or Brandt customer service directly. Spare parts availability information is also not provided.





