1. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Utilitech Wall Wash Trim is designed to provide a focused light distribution, creating a "wall wash" effect for recessed lighting fixtures. This trim is specifically designed to fit 4-inch recessed lighting housings and features a white finish with magnetic attachment for ease of installation. It is made from copper material, ensuring durability and efficient light reflection.
Figure 1: Utilitech Wall Wash Trim, front view. This image shows the white finish and the curved design of the trim, which helps direct light.
2 സുരക്ഷാ വിവരങ്ങൾ
Please read all instructions carefully before installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.
- Always disconnect power at the circuit breaker before installing or servicing the fixture.
- ഇൻസ്റ്റാളേഷൻ പ്രക്രിയയെക്കുറിച്ച് നിങ്ങൾക്ക് ഉറപ്പില്ലെങ്കിൽ യോഗ്യതയുള്ള ഒരു ഇലക്ട്രീഷ്യനെ സമീപിക്കുക.
- എല്ലാ വൈദ്യുത കണക്ഷനുകളും പ്രാദേശിക കോഡുകളും ഓർഡിനൻസുകളും പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
- Do not install in wet locations unless the housing is rated for such use.
- Handle with care to avoid damage to the trim or housing.
3. പാക്കേജ് ഉള്ളടക്കം
ഇൻസ്റ്റാളേഷൻ ആരംഭിക്കുന്നതിന് മുമ്പ് എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക.
- 1 x Utilitech Wall Wash Trim (White Finish)
- ഇൻസ്റ്റലേഷൻ ഗൈഡ് (ഈ പ്രമാണം)
Figure 2: Utilitech Wall Wash Trim as packaged. The packaging indicates it is a 4-inch trim with a white finish and wall wash reflective material.
4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
This trim is designed for easy installation into compatible 4-inch recessed lighting housings. Ensure the housing is properly installed and wired according to its own instructions and local electrical codes.
- ഭവനം തയ്യാറാക്കുക: Ensure the recessed lighting housing is securely mounted in the ceiling and all electrical connections are complete and safe. The power to the circuit should be OFF at the breaker.
- Remove Existing Trim (if applicable): If replacing an old trim, gently pull it down from the housing. Disconnect any springs or clips holding it in place.
- Align the Trim: Position the Utilitech Wall Wash Trim so that the wall wash opening faces the wall you wish to illuminate. The trim is designed with magnetic attachment points that will align with the housing.
- Secure the Trim: Gently push the trim upwards into the recessed housing. The magnetic points will secure the trim firmly in place. Ensure it sits flush with the ceiling surface.
- പവർ പുന ore സ്ഥാപിക്കുക: Once the trim is securely installed, turn the power back ON at the circuit breaker. Test the light fixture to ensure proper operation.
Note: This trim is compatible with select recessed downlight housings. Refer to your housing's manual for compatibility details.
5. ഓപ്പറേഷൻ
The Utilitech Wall Wash Trim itself does not have operational controls. Its function is passive, directing light from the installed bulb within the recessed housing. Once installed, the light will operate according to the switch connected to the recessed fixture.
- പ്രകാശ ദിശ: The unique design of the wall wash trim directs light towards a specific wall, creating an accent lighting effect.
- ബൾബ് അനുയോജ്യത: Ensure the bulb used in the recessed housing is compatible with the housing and provides the desired light output for the wall wash effect.
6. പരിപാലനം
The Utilitech Wall Wash Trim requires minimal maintenance to retain its appearance and functionality.
- വൃത്തിയാക്കൽ: To clean the trim, ensure the power to the fixture is OFF. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use abrasive cleaners, solvents, or polishes, as these may damage the finish.
- പരിശോധന: Periodically inspect the trim for any signs of damage or loosening. If the trim appears loose, gently push it back into place until the magnets secure it.
- ബൾബ് മാറ്റിസ്ഥാപിക്കൽ: When replacing the bulb in the recessed housing, gently pull down the trim to access the bulb. Reinstall the trim after bulb replacement.
7. പ്രശ്നപരിഹാരം
If you encounter issues with your Utilitech Wall Wash Trim, consider the following common solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Trim does not sit flush with ceiling. | Not properly aligned or housing obstruction. | Ensure the trim is correctly aligned with the housing. Check for any wires or insulation obstructing the trim's path. |
| Trim falls out of housing. | Magnetic attachment not engaged or incompatible housing. | Push the trim firmly until the magnets engage. Verify that your recessed housing is compatible with magnetic trims. |
| Light output is not as expected. | തെറ്റായ ബൾബ് തരം അല്ലെങ്കിൽ വാട്ട്tage. | ശരിയായ ബൾബ് തരവും വെള്ളവും ഉറപ്പാക്കുക.tage are used for the desired wall wash effect. Check the bulb's lumen output and beam spread. |
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| ബ്രാൻഡ് | യൂട്ടിലിടെക് |
| മോഡൽ നമ്പർ | #MQTL-B301 #0519041 |
| യു.പി.സി | 822985510745 |
| പൂർത്തിയാക്കുക | വെള്ള |
| ഭവന അനുയോജ്യത | 4-inch recessed housings |
| അറ്റാച്ച്മെൻ്റ് തരം | കാന്തിക |
| മെറ്റീരിയൽ | ചെമ്പ് |
| ഇനത്തിൻ്റെ ഭാരം | 3.99 ഔൺസ് (ഏകദേശം 113 ഗ്രാം) |
| പാക്കേജ് അളവുകൾ | 5.4 x 5.4 x 1.5 ഇഞ്ച് (ഏകദേശം 13.7 x 13.7 x 3.8 സെ.മീ) |
| ശൈലി | ആധുനികം |
| നിർമ്മാതാവ് | L G Sourcing Inc. |
9. വാറൻ്റിയും പിന്തുണയും
This Utilitech product comes with a 3-year warranty as indicated on the product packaging. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Utilitech customer support.
For technical assistance or further inquiries, please contact Utilitech customer service. Contact information can typically be found on the product packaging or the official Utilitech webസൈറ്റ്.
വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിൻ്റെ തെളിവ് സൂക്ഷിക്കുക.
