ആമുഖം
The OSD Audio PAM-1270 is a versatile 6-zone, 12-channel multi-combination amplifier designed for distributed audio systems. It delivers 60 Watts per channel and supports commercial 70V/100V or standard 8 Ohm speaker configurations. This manual provides essential information for the proper installation, operation, and maintenance of your PAM-1270 ampജീവൻ.
പ്രധാന സവിശേഷതകൾ
- Independently switchable on each zone between zone-specific stereo inputs and a mono global audio balanced input.
- Each zone is independently Stereo/Bridge switchable to select a single mono output for single speaker use or higher output power.
- Each zone is independently controllable via RS232, IR, and voltagഇ ട്രിഗർ ലൈനുകൾ.
- Each zone has a -20dB Limiter and independent MUTE trigger inputs (activated by +3 to +30V DC).
- Each zone provides individual Trigger Outputs (+12V DC) to indicate the status of each zone.
- The unit features front panel "zone on" and "zone overload" indicators.
- Master Global Trigger In (+3 to +30V DC) and Trigger Out (+12V DC).
- Detachable screw-terminal connectors for Global Balanced Audio Input/Output, IR, Sense, and Speaker Outputs.
Image: Detailed list of features for the PAM-1270 ampജീവൻ.
സജ്ജമാക്കുക
ഫിസിക്കൽ ഇൻസ്റ്റലേഷൻ
The PAM-1270 amplifier is designed for installation in standard 19-inch equipment racks or for placement on flat, horizontal surfaces. Ensure adequate ventilation around the unit to prevent overheating.
Rear Panel Connections Overview
Image: The rear panel of the OSD Audio PAM-1270 amplifier, illustrating all connection points for audio inputs, speaker outputs, and control interfaces.
ഓഡിയോ ഇൻപുട്ട് കണക്ഷനുകൾ
ദി amplifier features both balanced and unbalanced inputs for flexible integration into various audio systems. Each zone has dedicated stereo RCA 'Line In' inputs. Additionally, a global 'Audio Bus' input allows a single source to be distributed across multiple zones.
- ലൈൻ ഇൻ (ആർസിഎ): Connect your stereo audio sources (e.g., CD player, streamer) to the corresponding 'Line In' jacks for each zone.
- Audio Bus: Use the screw-terminal connector for the global balanced audio input. This input can feed all zones simultaneously.
സ്പീക്കർ put ട്ട്പുട്ട് കണക്ഷനുകൾ
The PAM-1270 supports 8 Ohm, 70V, and 100V speaker systems. Use the appropriate screw-terminal connectors for your speaker type. Ensure correct polarity when connecting speakers.
- 8 Ohm Speakers: Connect standard 8 Ohm speakers to the designated terminals.
- 70V/100V Commercial Speakers: Connect commercial constant voltage speakers to the 70V or 100V terminals as required.
- Stereo/Bridged Mono: Each zone can be configured for stereo operation or bridged mono for higher power output to a single speaker. Refer to the switch located near the speaker terminals for selection.
Control Connections (RS232, IR, Trigger Lines)
ദി amplifier offers advanced control options for integration into automated systems.
ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the RS232, IR, and Voltage Trigger Line connection points on the PAM-1270 rear panel.
- RS232: Connect an RS232 controller for advanced programming and control. A dedicated RS232 Commands and Queries Guide is available for programming.
- ഐആർ റിമോട്ട്: The unit includes a remote control. Each stereo zone/bridged mono features a connector for IR In, Ground, Mute, and Status Port, allowing for universal remote control integration.
- വാല്യംtage Trigger Lines: Utilize the Master Global Trigger In (+3 to +30V DC) and Trigger Out (+12V DC) for synchronized power on/off with other components. Individual Line/Bus Trigger inputs are also available per stereo zone/bridged mono.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
പവർ ചെയ്യുന്നത് ഓൺ/ഓഫ്
പവർ കോഡ് ബന്ധിപ്പിക്കുക amplifier and a suitable AC outlet. Use the power switch on the rear panel to turn the unit on or off. The front panel indicators will illuminate upon power-on.
Zone Selection and Control
Each of the six zones can be controlled independently. Use the input selection switches on the rear panel to choose between the zone's dedicated 'Line In' or the global 'Audio Bus' input. Volume for each zone can be adjusted via the remote control or integrated control systems.
Stereo/Bridge Mode
For each zone, a switch allows you to select between stereo output (two channels) or bridged mono output (one channel with higher power). Ensure this switch is set correctly for your speaker configuration before connecting speakers.
Limiter and Mute Functions
The PAM-1270 includes a -20dB limiter per zone to prevent signal clipping and speaker damage. Mute functions can be activated via trigger inputs, providing quick audio control for specific zones.
റിമോട്ട് കൺട്രോൾ ഉപയോഗം
The included IR remote control allows for basic functions such as volume adjustment and zone control. For advanced integration, refer to the RS232 and IR codes documentation.
മെയിൻ്റനൻസ്
To ensure the longevity and optimal performance of your PAM-1270 ampലിഫയർ, ഈ പരിപാലന മാർഗ്ഗനിർദ്ദേശങ്ങൾ പാലിക്കുക:
- വൃത്തിയാക്കൽ: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior. Avoid abrasive cleaners or solvents.
- വെൻ്റിലേഷൻ: എന്ന് ഉറപ്പാക്കുക amplifier's ventilation openings are not blocked. Proper airflow is crucial to prevent overheating.
- കണക്ഷനുകൾ: Periodically check all audio and power connections to ensure they are secure.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your PAM-1270 ampലിഫയർ, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും കാണുക:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ശക്തിയില്ല | Power cord disconnected; power switch off; blown fuse | Check power cord connection; ensure power switch is ON; inspect and replace fuse if necessary (refer to specifications for fuse type). |
| ഒരു സോണിൽ നിന്ന് ശബ്ദമില്ല. | Incorrect input selection; speaker wires disconnected; zone muted; volume too low | Verify input source selection; check speaker connections; ensure zone is not muted; increase volume. |
| വികലമായ ശബ്ദം | Input signal too high; speaker impedance mismatch; faulty speaker | Reduce input signal level; ensure correct speaker impedance (8 Ohm, 70V, or 100V); test with a different speaker. |
| യൂണിറ്റ് അമിത ചൂടാക്കൽ | Blocked ventilation; excessive load | Ensure proper airflow around the unit; reduce load or check speaker connections for shorts. |
സ്പെസിഫിക്കേഷനുകൾ
The following are the technical specifications for the OSD Audio PAM-1270 ampജീവപര്യന്തം:
- തുടർച്ചയായ Outട്ട്പുട്ട് പവർ: 30W per channel 8 ohms at 1kHz THD 0.1%
- തുടർച്ചയായ Outട്ട്പുട്ട് പവർ: 50W per channel 4 ohms at 1kHz THD 0.1%
- Bridged Output Power: 100W Bridged 8 ohms at 1kHz THD 0.1%
- Commercial Output Power: 30W per channel 70V/100V at 1kHz THD 0.1%
- സാങ്കേതികവിദ്യ: 85% Class D technology
- ആകെ ഹാർമോണിക് ഡിസ്റ്റോർഷൻ: 0.1% @ 10W
- സിഗ്നൽ-ടു-നോയിസ് അനുപാതം: 90dB A-Weighted 1Kz
- ചാനൽ വേർതിരിക്കൽ: 65dB 1Kz
- ഫ്രീക്വൻസി പ്രതികരണം: 20Hz to 20kHz +/-1Db
- ഇൻപുട്ട് സെൻസിറ്റിവിറ്റി: 600mV @ 30W
- ടോൺ നിയന്ത്രണം: Bass 100Hz +/-12Db, Treble 10KHz +/-12Db
- Global Audio Balanced Input Impedance: 600 ഓം
- ലൈൻ ഇൻപുട്ട് ഇംപെഡൻസ്: 47 കെ-ഓം
- Rack Mounting Requirements: 19 ഇഞ്ച് റാക്ക് വീതി, 2U റാക്ക് ഉയരം
- പവർ ആവശ്യകതകൾ: 115VAC 60Hz 10A / 230VAC 50Hz 5A
- അളവുകൾ (W x H x D): 430mm x 88mm x 416mm (17 x 3.5 x 16.5 ഇഞ്ച്)
- ഭാരം: 22 Kg (48.4 lbs) / Item Weight: 1.71 ounces (Note: Item Weight of 1.71 ounces appears to be an error in source data, 22 Kg is more accurate for an amplifier of this type.)
Image: Detailed technical specifications for the PAM-1270 ampജീവൻ.
വാറൻ്റി വിവരങ്ങൾ
For detailed warranty terms and conditions, please refer to the warranty card included with your product or contact OSD Audio customer support directly. Keep your proof of purchase for warranty claims.
ഉപഭോക്തൃ പിന്തുണ
If you require further assistance, technical support, or have questions regarding your OSD Audio PAM-1270 amplifier, please contact OSD Audio customer support. Visit the official OSD Audio webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കും അധിക ഉറവിടങ്ങൾക്കുമായി സൈറ്റ്.
OSD ഓഡിയോ Webസൈറ്റ്: www.osdaudio.com