Elegoo EL-CK-003 നവീകരിച്ച ഇലക്ട്രോണിക്സ് ഫൺ കിറ്റ് ഉപയോക്തൃ മാനുവൽ

1. ആമുഖം

This manual provides essential instructions for the Elegoo EL-CK-003 Upgraded Electronics Fun Kit. This kit is designed to introduce users to basic electronics and circuit building, compatible with platforms such as Arduino, Raspberry Pi, and STM32. It includes a variety of components necessary for learning fundamental electronic concepts and constructing simple projects.

2. കിറ്റ് ഉള്ളടക്കം

The Elegoo EL-CK-003 kit includes a comprehensive selection of components for various electronic projects. Below is an overview of the items you will find in your kit.

ചിത്രം 2.1: A visual representation of the various components included in the Elegoo EL-CK-003 Upgraded Electronics Fun Kit, neatly arranged for identification. This includes resistors, LEDs, capacitors, a breadboard, jumper wires, and a power supply module.

പ്രധാന ഘടകങ്ങൾ ഉൾപ്പെടുന്നു:

• പവർ സപ്ലൈ മൊഡ്യൂൾ: 1 piece, for providing regulated power to the breadboard.
• ബ്രെഡ്ബോർഡ്: 1 piece, 830 tie-points for solderless circuit prototyping.
• ജമ്പർ വയറുകൾ: Various types including solderless jumper wires (140 pieces) and F-M Dupont wires (20 pieces) for connections.
• റെസിസ്റ്ററുകൾ: A range of values (10Ω, 100Ω, 220Ω, 330Ω, 1KΩ, 2KΩ, 5.1KΩ, 10KΩ, 100KΩ, 1MΩ), 10 pieces each.
• LED- കൾ: Red, Yellow, Blue, Green, White (10 pieces each), and 1 RGB LED.
• കപ്പാസിറ്ററുകൾ: Electrolytic (100uF 50V, 5 pieces), Ceramic (22pF, 104pF, 10 pieces each).
• ട്രാൻസിസ്റ്ററുകൾ: PN2222 (5 pieces).
• ഇന്റഗ്രേറ്റഡ് സർക്യൂട്ടുകൾ: 74HC595 (1 piece).
• സെൻസറുകൾ: Photoresistor (2 pieces), Thermistor (1 piece).
• മറ്റ് ഘടകങ്ങൾ: Passive Buzzer (1 piece), Active Buzzer (1 piece), Buttons (10 pieces), Precision Potentiometer (1 piece), 4N35 Optocoupler (1 piece), Diodes (5 pieces), 40Pin Header (2 pieces).

3. Power Supply Module Operation

The included power supply module is designed to provide stable 3.3V and 5V power to your breadboard projects. Understanding its features and requirements is crucial for safe and effective use.

ചിത്രം 3.1: വിശദമായി view of the power supply module, highlighting its input voltage port, locking on/off switch, LED power indicator, USB interface for external devices, and output header pins for 5V, 3.3V, and GND connections.

3.1. സവിശേഷതകൾ

• ഇൻപുട്ട് വോളിയംtage: 6.5-9V DC via a 5.5mm x 2.5mm plug.
• ഔട്ട്പുട്ട്: Selectable 3.3V and 5V outputs for breadboard power rails.
• ഓൺ/ഓഫ് സ്വിച്ച്: Locking switch to control power to the breadboard.
• LED സൂചകം: വൈദ്യുതി നൽകുമ്പോൾ പ്രകാശിക്കുന്നു.
• USB ഇൻ്റർഫേസ്: Provides 5V output for powering external devices.

3.2. Power Adapter Requirements

A power adapter is required to operate the power supply module. This adapter is ഉൾപ്പെടുത്തിയിട്ടില്ല കിറ്റിൽ.

ചിത്രം 3.2: Illustration of the required power adapter specifications for the Elegoo power supply module. It details the output, plug size, and polarity for proper connection.

• ഔട്ട്പുട്ട്: DC 9V 1A / 1000mA.
• പ്ലഗ് വലുപ്പം: Outer Diameter 5.5mm, Inner Diameter 2.5mm.
• Connector Polarity: Inside positive (+), outside negative (-).

Ensure the adapter meets these specifications to prevent damage to the module or connected components.

4. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

Follow these steps to set up your first circuit using the Elegoo EL-CK-003 kit.

1. ഘടകങ്ങളുമായി പരിചയപ്പെടുക: Before starting, identify the components you plan to use. Refer to the kit contents section and the provided component list.
2. Prepare the Breadboard: The breadboard is your prototyping area. Understand its internal connections: the long horizontal rows (power rails) are typically connected along their length, and the shorter vertical columns are connected within each column.
3. പവർ സപ്ലൈ ബന്ധിപ്പിക്കുക: Insert the power supply module into the breadboard's power rails. Ensure the pins align correctly with the positive and negative rails. Connect a compatible DC 9V power adapter to the module's DC-in port.
4. വാല്യം തിരഞ്ഞെടുക്കുകtage: Use the jumpers on the power supply module to select either 3.3V or 5V for each side of the breadboard's power rails, as required by your circuit.
5. Build Your Circuit: Carefully insert components into the breadboard. Use jumper wires to make connections between components. Pay close attention to component polarity (e.g., LEDs, diodes, electrolytic capacitors, integrated circuits).
6. കണക്ഷനുകൾ രണ്ടുതവണ പരിശോധിക്കുക: Before applying power, thoroughly review all connections to ensure they match your circuit diagram. Incorrect wiring can damage components.
7. പവർ പ്രയോഗിക്കുക: Once confident in your wiring, switch on the power supply module. Observe your circuit's behavior.

ചിത്രം 4.1: ഒരു വശം view ഒരു മുൻample electronic circuit assembled on a breadboard, demonstrating the placement of various components like LEDs, resistors, and the power supply module.

5. Operating Principles of Key Components

This section provides basic operational guidance for some common components in your kit.

5.1. Breadboard

The breadboard allows for temporary prototyping of electronic circuits without soldering. Components are inserted into holes, and internal metal clips make connections. The central area has vertical connections, while the side rails (power rails) have horizontal connections for power and ground.

5.2. റെസിസ്റ്ററുകൾ

Resistors limit current flow in a circuit. Their value is indicated by color bands. Always ensure you use the correct resistance value for your circuit to protect other components, especially LEDs.

5.3. Light Emitting Diodes (LEDs)

LEDs are polarized components, meaning they must be connected in the correct orientation. The longer lead is typically the anode (+) and connects to the positive side of the circuit, while the shorter lead is the cathode (-) and connects to the negative side (ground). Always use a current-limiting resistor in series with an LED.

5.4. Potentiometer

A potentiometer is a variable resistor with three terminals. It can be used to control voltage or resistance in a circuit, often for adjusting brightness of an LED, motor speed, or sensor sensitivity.

ചിത്രം 5.1: A hand demonstrating the adjustment of a potentiometer on a breadboard, illustrating how variable components are interacted with in a live circuit.

6. പരിപാലനം

Proper care of your electronics kit will ensure its longevity and reliable performance.

• സംഭരണം: Store components in their original packaging or a dedicated organizer to prevent loss and damage. Keep them in a dry, cool environment away from direct sunlight.
• കൈകാര്യം ചെയ്യൽ: Handle components carefully, especially delicate ones like integrated circuits and LEDs. Avoid bending leads excessively.
• വൃത്തിയാക്കൽ: Keep the breadboard and components free from dust and debris. Use a soft, dry brush or compressed air for cleaning. Avoid liquids.
• പവർ ഓഫ്: Always disconnect power from your circuits when making changes or when not in use.

7. പ്രശ്‌നപരിഹാരം

If your circuit is not functioning as expected, consider the following common troubleshooting steps:

• ശക്തിയില്ല:
  • Ensure the power adapter is correctly connected to the power supply module and plugged into a working outlet.
  • Verify the power supply module's on/off switch is in the 'on' position and the LED indicator is lit.
  • Check the power supply module's jumpers for correct voltage selection (3.3V or 5V).
• ഘടകം പ്രവർത്തിക്കുന്നില്ല:
  • Check component polarity (e.g., LEDs, diodes).
  • Verify all connections with jumper wires are secure and in the correct holes.
  • Ensure resistors are of the correct value and properly connected.
  • Test individual components if possible (e.g., test an LED with a known working power source and resistor).
• ഇടവിട്ടുള്ള കണക്ഷനുകൾ:
  • Breadboard holes can wear out. Try moving components or wires to different holes.
  • Ensure jumper wires are fully inserted and not loose.
• അമിത ചൂടാക്കൽ ഘടകങ്ങൾ:
  • ഉടൻ വൈദ്യുതി ബന്ധം വിച്ഛേദിക്കുക.
  • Check for short circuits or incorrect component values (e.g., too low a resistor value for an LED).

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed specifications for the Elegoo EL-CK-003 Upgraded Electronics Fun Kit.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support regarding your Elegoo EL-CK-003 Upgraded Electronics Fun Kit, please refer to the official Elegoo webസൈറ്റിൽ അല്ലെങ്കിൽ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുക. കോൺടാക്റ്റ് വിശദാംശങ്ങൾ സാധാരണയായി ഉൽപ്പന്ന പാക്കേജിംഗിലോ നിർമ്മാതാവിന്റെയോ നൽകിയിട്ടുണ്ട് webസൈറ്റ്.

You can visit the official Elegoo website for additional resources, tutorials, and support:

• Elegoo Official Webസൈറ്റ്