ആമുഖം
This manual provides essential instructions for the safe and effective use of your YATO YT-36709 Propane/Butane Torch. Please read it thoroughly before operation and retain it for future reference. This torch is designed for various heating, soldering, and brazing applications.
സുരക്ഷാ വിവരങ്ങൾ
WARNING: Failure to follow these instructions may result in fire, explosion, serious injury, or death.
- Always operate the torch in a well-ventilated area to prevent the accumulation of hazardous fumes.
- Keep the torch and gas canister away from flammable materials, combustible liquids, and heat sources.
- Wear appropriate personal protective equipment, including safety glasses or goggles, heat-resistant gloves, and protective clothing.
- Do not puncture, incinerate, or expose gas canisters to temperatures exceeding 50°C (122°F).
- Ensure the gas canister is securely attached and there are no leaks before ignition. Check for leaks using a soapy water solution; never use an open flame.
- Never leave an ignited torch unattended.
- കുട്ടികൾക്ക് ലഭ്യമാകാതെ സൂക്ഷിക്കുക.
- Allow the torch to cool completely before storing.
- Do not modify the torch or use it for purposes other than its intended use.
ഉൽപ്പന്നം കഴിഞ്ഞുview
The YATO YT-36709 is a robust propane/butane torch featuring Piezo ignition for quick and reliable starting. It is designed for flexible use with a 360-degree operational capability and is compatible with standard EN417 gas cartridges. The torch delivers a powerful flame, reaching temperatures up to 1600°C.
Diagram illustrating the YATO YT-36709 torch features, including Piezo ignition, 1.28 kW power, 360-degree operation capability, gas and air intake, and compatibility with Butane EN417 gas cartridges. The image also shows the torch in operation, heating a pipe to 1600°C.
ഘടകങ്ങൾ
- Torch Head: Directs the flame.
- ഗ്യാസ് നിയന്ത്രണ നോബ്: Adjusts gas flow and flame intensity.
- പീസോ ഇഗ്നിറ്റർ ബട്ടൺ: For electronic ignition.
- ലോക്ക് ബട്ടൺ: For continuous flame operation.
- Gas Cartridge Connection: For attaching EN417 standard gas canisters.
സജ്ജമാക്കുക
- Ensure the gas control knob on the torch is in the fully closed (OFF) position.
- Align the torch head connector with the valve on the EN417 standard propane/butane gas cartridge.
- Screw the torch head onto the gas cartridge firmly by hand until a tight seal is achieved. Do not overtighten.
- Check for any gas leaks by listening for a hissing sound or applying a soapy water solution around the connection point. If bubbles appear, tighten the connection or replace the cartridge if damaged.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
ജ്വലനം
- Hold the torch away from your body and any flammable objects.
- Slowly turn the gas control knob counter-clockwise to allow a small amount of gas to flow.
- Press the Piezo igniter button repeatedly until the flame ignites.
- If the torch does not ignite after a few attempts, close the gas knob, wait a few seconds, and repeat the process.
ഫ്ലേം അഡ്ജസ്റ്റ്മെന്റ്
- Turn the gas control knob clockwise to decrease the flame intensity or counter-clockwise to increase it.
- For continuous operation, press the lock button after ignition. To release, press the lock button again.
ഷട്ട് ഡൗൺ ചെയ്യുന്നു
- Turn the gas control knob fully clockwise until the flame extinguishes and the gas flow stops completely.
- Allow the torch head to cool down naturally before handling or storing. Do not touch the hot parts of the torch.
- Once cool, disconnect the gas cartridge if storing for an extended period.
മെയിൻ്റനൻസ്
- Regularly inspect the torch for any signs of damage, wear, or gas leaks.
- Keep the torch clean and free from dirt and debris. Use a soft, dry cloth for cleaning.
- Do not use abrasive cleaners or solvents that could damage the torch's components.
- Store the torch in a cool, dry place, away from direct sunlight and heat sources, and out of reach of children.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ടോർച്ച് കത്തുന്നില്ല. | No gas flow, empty gas cartridge, faulty igniter, or clogged nozzle. | Ensure gas control knob is open. Replace gas cartridge. Check igniter for spark. Clean nozzle if necessary (ensure torch is cool and disconnected from gas). |
| ജ്വാല ദുർബലമാണ് അല്ലെങ്കിൽ സ്ഥിരതയില്ലാത്തതാണ്. | Low gas pressure, nearly empty cartridge, or partial nozzle blockage. | Replace gas cartridge. Ensure gas control knob is fully open. Clean nozzle. |
| Gas leak detected. | Loose connection or damaged seal/cartridge. | Immediately turn off gas. Tighten connection. If leak persists, replace gas cartridge or contact support if torch is damaged. |
സാങ്കേതിക സവിശേഷതകൾ
- മോഡൽ നമ്പർ: YT-36709
- നിർമ്മാതാവ്: യാറ്റോ
- പ്രവർത്തന താപനില: 1600 ഡിഗ്രി സെൽഷ്യസ് വരെ
- ശക്തി: 1.28 kW
- ഗ്യാസ് ഫ്ലോ റേറ്റ്: 0.11 l/min
- ഭാരം: 236 ഗ്രാം
- അളവുകൾ (L x W x H): 22.5 x 14.1 x 4.9 സെ.മീ
- വാതക തരം: Propane/Butane (EN417 compatible cartridges)
- ജ്വലനം: പീസോ ഇലക്ട്രിക്
- മാതൃരാജ്യം: ചൈന
വാറൻ്റിയും പിന്തുണയും
For warranty information or technical support regarding your YATO YT-36709 Propane/Butane Torch, please contact your retailer or visit the official YATO website. Please note that information regarding the availability of spare parts is currently unavailable.
