WPS WPM162

WPS WPM162 Wiper Motor Instruction Manual

ഇൻസ്റ്റാളേഷൻ, പ്രവർത്തനം, പരിപാലനം എന്നിവയെക്കുറിച്ചുള്ള നിങ്ങളുടെ സമഗ്രമായ ഗൈഡ്.

1. ആമുഖം

Thank you for choosing the WPS WPM162 Front Windshield Wiper Motor. This manual provides essential information for the proper installation, safe operation, and effective maintenance of your new wiper motor. Please read this manual thoroughly before beginning any installation or operation to ensure optimal performance and longevity of the product.

The WPS WPM162 is designed as a direct replacement for your vehicle's front windshield wiper system, ensuring clear visibility during adverse weather conditions.

2 സുരക്ഷാ വിവരങ്ങൾ

ഉൽപ്പന്നത്തിനും വാഹനത്തിനും പരിക്കുകളോ കേടുപാടുകളോ ഉണ്ടാകാതിരിക്കാൻ ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും പാലിക്കുക:

3. ഉൽപ്പന്നം കഴിഞ്ഞുview ഘടകങ്ങളും

The WPS WPM162 is a robust front windshield wiper motor designed for reliable performance. It converts electrical energy into mechanical motion to drive the wiper linkage, moving the wiper blades across the windshield.

WPS WPM162 Wiper Motor - Main View

ചിത്രം 3.1: പ്രധാനം view of the WPS WPM162 Wiper Motor, showing the motor housing and the output arm mechanism.

WPS WPM162 Wiper Motor - Multiple Views

Figure 3.2: Two different perspectives of the WPS WPM162 Wiper Motor, highlighting its compact design and mounting points.

WPS WPM162 Wiper Motor - Angled View

ചിത്രം 3.3: ഒരു കോണീയ view of the WPS WPM162 Wiper Motor, providing a clearer look at the electrical connector and gear housing.

4. ഇൻസ്റ്റലേഷൻ നിർദ്ദേശങ്ങൾ

This section provides general steps for replacing a front windshield wiper motor. Specific procedures may vary depending on your vehicle's make and model. Always refer to your vehicle's service manual for detailed instructions.

  1. വാഹനം തയ്യാറാക്കുക: Park the vehicle on a level surface and engage the parking brake. Turn off the ignition.
  2. ബാറ്ററി വിച്ഛേദിക്കുക: Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical activation.
  3. Access Wiper Motor: Depending on your vehicle, you may need to remove the wiper arms, cowl panel, or other obstructing components to gain access to the wiper motor.
  4. പഴയ മോട്ടോർ വിച്ഛേദിക്കുക: Disconnect the electrical connector from the old wiper motor. Remove any mounting bolts or nuts securing the motor to the vehicle's frame or wiper linkage. Carefully detach the motor from the linkage.
  5. പുതിയ മോട്ടോർ സ്ഥാപിക്കുക: Connect the WPS WPM162 Wiper Motor to the vehicle's wiper linkage. Ensure it is properly aligned. Secure the motor with the original mounting bolts or nuts. Tighten to manufacturer specifications.
  6. ഇലക്ട്രിക്കൽ ബന്ധിപ്പിക്കുക: Reconnect the electrical connector to the new wiper motor.
  7. വീണ്ടും കൂട്ടിച്ചേർക്കുക: Reinstall any removed cowl panels, wiper arms, or other components. Ensure wiper arms are correctly positioned on the windshield.
  8. ബാറ്ററി വീണ്ടും ബന്ധിപ്പിക്കുക: വാഹന ബാറ്ററിയുടെ നെഗറ്റീവ് ടെർമിനൽ വീണ്ടും ബന്ധിപ്പിക്കുക.
  9. ടെസ്റ്റ് ഓപ്പറേഷൻ: Turn on the ignition and test the wiper system at all speeds (intermittent, low, high) and with the washer fluid. Ensure smooth and complete blade travel.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The WPS WPM162 Wiper Motor operates in conjunction with your vehicle's existing wiper control system. There are no direct user controls on the motor itself. To operate the wipers, use your vehicle's dashboard or steering column controls to select the desired wiper speed (intermittent, low, high) or to activate the washer fluid.

Ensure that the windshield is free of ice or heavy snow before operating the wipers to prevent damage to the motor or wiper blades.

6. പരിപാലനം

Regular maintenance helps ensure the longevity and optimal performance of your wiper system:

7. പ്രശ്‌നപരിഹാരം

If you experience issues with your wiper system, consider the following common troubleshooting steps:

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
Wipers do not move.Blown fuse, faulty electrical connection, motor failure.Check vehicle's fuse box for a blown wiper fuse and replace if necessary. Inspect electrical connections to the motor. If fuse is good and connections are secure, the motor may need replacement.
Wipers move slowly or intermittently.കുറഞ്ഞ വോളിയംtage, worn motor, obstructed linkage.ബാറ്ററി വോളിയം പരിശോധിക്കുകtage. Inspect wiper linkage for obstructions or excessive friction. The motor may be failing.
Wipers make excessive noise.Worn wiper blades, dry windshield, faulty linkage, motor issue.Replace worn wiper blades. Ensure windshield is wet when operating wipers. Inspect linkage for wear or lubrication needs. If noise persists, the motor may be faulty.
Wipers do not park correctly.Motor park mechanism issue, incorrect installation of wiper arms.Ensure wiper arms were installed in the correct park position. The motor's internal park mechanism may be faulty.

ട്രബിൾഷൂട്ടിംഗ് ഘട്ടങ്ങൾ പ്രശ്നം പരിഹരിക്കുന്നില്ലെങ്കിൽ, യോഗ്യതയുള്ള ഒരു ഓട്ടോമോട്ടീവ് ടെക്നീഷ്യനെ സമീപിക്കുക.

8 സ്പെസിഫിക്കേഷനുകൾ

Key specifications for the WPS WPM162 Wiper Motor:

ആട്രിബ്യൂട്ട്വിശദാംശങ്ങൾ
മോഡൽ നമ്പർWPM162
ഭാഗം നമ്പർWPM162
ബ്രാൻഡ്WPS
നിർമ്മാതാവ്Western Power Sports
ഇനത്തിൻ്റെ ഭാരം6.45 പൗണ്ട്
ഉൽപ്പന്ന അളവുകൾ12 x 7 x 6 ഇഞ്ച്
OEM Equivalent Part NumberWestern Power Sports WPM162
അപേക്ഷFront Windshield Wiper Motor

9. വാറൻ്റി വിവരങ്ങൾ

For specific warranty terms and conditions related to your WPS WPM162 Wiper Motor, please refer to the warranty documentation provided at the time of purchase or contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.

10. ഉപഭോക്തൃ പിന്തുണ

If you have any questions, require technical assistance, or need further support regarding your WPS WPM162 Wiper Motor, please contact the retailer from whom you purchased the product or visit the official Western Power Sports webബന്ധപ്പെടാനുള്ള വിവരങ്ങൾക്കുള്ള സൈറ്റ്.

Western Power Sports Official Webസൈറ്റ്: www.wps-inc.com (www.wps-inc.com)

അനുബന്ധ രേഖകൾ - WPM162

പ്രീview Cudy Wi-Fi Extender Quick Installation Guide
A concise guide to installing and setting up your Cudy Wi-Fi extender, covering connection, pairing, and optimal placement for extended Wi-Fi signal.
പ്രീview ടർബോ ഹോട്ട്‌സ്‌പോട്ട് 2 ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
ടർബോ ഹോട്ട്‌സ്‌പോട്ട് 2 മൊബൈൽ ഹോട്ട്‌സ്‌പോട്ട് സജ്ജീകരിക്കുന്നതിനും ഉപയോഗിക്കുന്നതിനുമുള്ള ഒരു സമഗ്ര ഗൈഡ്, ഇന്റർനെറ്റിലേക്ക് കണക്റ്റുചെയ്യൽ, വൈ-ഫൈ ക്രമീകരണങ്ങൾ കൈകാര്യം ചെയ്യൽ, അതിന്റെ സവിശേഷതകൾ മനസ്സിലാക്കൽ എന്നിവ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview BDG-256 ക്വിക്ക് സ്റ്റാർട്ട് ഗൈഡ്
BDG-256 കമ്മ്യൂണിക്കേഷൻസ് ഗേറ്റ്‌വേയ്‌ക്കുള്ള ഒരു ദ്രുത ആരംഭ ഗൈഡ്, ഇൻസ്റ്റാളേഷൻ, ഇന്റർനെറ്റ് കണക്ഷൻ രീതികൾ (വൈ-ഫൈ ബൂസ്റ്റർ, WPS, AP മോഡ്), NEP ഉൽപ്പന്നങ്ങൾ ഉപയോഗിച്ച് കമ്മീഷൻ ചെയ്യൽ എന്നിവ ഉൾക്കൊള്ളുന്നു.
പ്രീview Atoveir വൈഫൈ റിപ്പീറ്റർ CF-WR304S ദ്രുത ഇൻസ്റ്റലേഷൻ ഗൈഡ്
Atoveir വൈഫൈ റിപ്പീറ്റർ CF-WR304S-നുള്ള ഒരു ദ്രുത ഇൻസ്റ്റാളേഷൻ ഗൈഡ്, ഉൽപ്പന്ന വിവരണം, കണക്ഷൻ രീതികൾ (WPS, മാനുവൽ സജ്ജീകരണം), ഇതർനെറ്റ് കേബിൾ ഉപയോഗം, ട്രബിൾഷൂട്ടിംഗ് പതിവുചോദ്യങ്ങൾ, സുരക്ഷാ മുന്നറിയിപ്പുകൾ എന്നിവ വിശദീകരിക്കുന്നു. ഈ ഉപകരണം ഉപയോഗിച്ച് നിങ്ങളുടെ വൈഫൈ കവറേജ് എങ്ങനെ വിപുലീകരിക്കാമെന്ന് മനസിലാക്കുക.
പ്രീview TP-Link TL-WA850RE റേഞ്ച് എക്സ്റ്റെൻഡർ ക്വിക്ക് ഇൻസ്റ്റലേഷൻ ഗൈഡ്
TP-Link TL-WA850RE റേഞ്ച് എക്സ്റ്റെൻഡറിനായുള്ള ഒരു ദ്രുത ഇൻസ്റ്റാളേഷൻ ഗൈഡ്, ടെതർ ആപ്പ് വഴിയുള്ള സജ്ജീകരണത്തെക്കുറിച്ച് വിശദമായി പ്രതിപാദിക്കുന്നു, web ബ്രൗസർ, WPS, സ്ഥലംമാറ്റ നുറുങ്ങുകൾ, ട്രബിൾഷൂട്ടിംഗ് എന്നിവയ്‌ക്കൊപ്പം.
പ്രീview How to Configure Wi-Fi Repeater Mode
Step-by-step guide to configuring your AP/Router in Wi-Fi Repeater Mode, both using WPS and wirelessly.