Hubbell 5874-5S Bell Cover and GFCI Receptacle Weatherproof Box Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The BELL 5874-5S is a 1-gang complete flip cover kit designed for outdoor electrical installations. It includes a self-test GFCI (Ground Fault Circuit Interrupter) receptacle, a weatherproof box, and a flip cover, all in a gray finish. This unit provides enhanced safety by protecting against electrical shocks in wet or damp സ്ഥാനങ്ങൾ.

പ്രധാന സവിശേഷതകൾ:

• Self-test GFCI for continuous safety monitoring.
• Rugged die-cast construction for durability.
• State-of-the-art powder coat finish for maximum weatherability and scratch resistance.
• Self-closing lids ensure weatherproof protection when the receptacle is not in use.
• Includes gasket and mounting hardware for easy installation.

ചിത്രം 1: മുൻഭാഗം view of the Hubbell 5874-5S Weatherproof Box with the cover open, revealing the integrated GFCI receptacle.

2 സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: To avoid fire, shock, or death; turn off power at circuit breaker or fuse box and test that power is off before wiring! This device must be installed by a qualified electrician in accordance with all national and local electrical codes.

• ഇൻസ്റ്റാളേഷൻ അല്ലെങ്കിൽ സർവീസ് ചെയ്യുന്നതിന് മുമ്പ് എല്ലായ്പ്പോഴും വൈദ്യുതി വിച്ഛേദിക്കുക.
• Do not use if the product appears damaged.
• എല്ലാ കണക്ഷനുകളും സുരക്ഷിതവും ശരിയായി ഇൻസുലേറ്റ് ചെയ്തതുമാണെന്ന് ഉറപ്പാക്കുക.
• This product is designed for outdoor use and must be installed in a location protected from direct water spray, as per local codes.
• പ്രൊപ്പോസിഷൻ 65 മുന്നറിയിപ്പ്: ഈ ഉൽപ്പന്നത്തിൽ കാലിഫോർണിയ സംസ്ഥാനത്തിന് ക്യാൻസറിനും ജനന വൈകല്യങ്ങൾക്കും അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന വൈകല്യങ്ങൾക്കും കാരണമാകുന്ന രാസവസ്തുക്കൾ അടങ്ങിയിരിക്കാം.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

1. ഇൻസ്റ്റലേഷൻ സൈറ്റ് തയ്യാറാക്കുക: Ensure the electrical box or mounting surface is clean, dry, and free of debris. Turn off power at the main circuit breaker.
2. Mount the Weatherproof Box: Position the weatherproof box over the existing electrical box or mounting surface. Use the included mounting hardware to securely fasten the box. Ensure the gasket is properly seated between the box and the mounting surface to maintain a watertight seal.
3. Wire the GFCI Receptacle: Connect the electrical wires to the GFCI receptacle terminals. Refer to the wiring diagram on the GFCI unit itself. Typically, the "LINE" terminals connect to the incoming power from the circuit breaker, and the "LOAD" terminals (if used) connect to downstream receptacles or devices that also require GFCI protection. Ensure proper polarity (hot, neutral, ground).
   

   ചിത്രം 2: പിൻഭാഗം view of the GFCI receptacle, indicating LINE and LOAD terminals for wiring.
4. Install the GFCI into the Box: Carefully fold the wires and insert the GFCI receptacle into the weatherproof box opening. Secure it with the provided screws.
5. Close the Flip Cover: Ensure the self-closing flip cover operates smoothly and provides a tight seal when closed.
6. പവർ പുന ore സ്ഥാപിക്കുക: Turn on power at the main circuit breaker.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The integrated GFCI receptacle is designed for user safety. It continuously monitors the electrical current and will trip (shut off power) if it detects a ground fault, preventing electrical shock.

GFCI Self-Test Function:

This GFCI features an automatic self-test function. It periodically performs an internal test to ensure it is functioning correctly. If the GFCI fails the self-test, the indicator light will turn RED, and the unit will trip, indicating it needs replacement.

മാനുവൽ പരിശോധനയും പുനഃസജ്ജീകരണവും:

• ടെസ്റ്റ് ബട്ടൺ: Press the "TEST" button (usually black or red) to manually trip the GFCI. This should cause the power to the receptacle to shut off.
• റീസെറ്റ് ബട്ടൺ: After testing or if the GFCI has tripped, press the "RESET" button (usually red or white) to restore power. If the GFCI does not reset, or trips immediately, there may be a ground fault or wiring issue that needs to be addressed.

Self-Closing Lids:

The flip cover features self-closing lids that automatically close when a plug is removed. This ensures continuous weatherproof protection for the receptacle when it is not in use.

5. പരിപാലനം

• പതിവ് വൃത്തിയാക്കൽ: Periodically clean the exterior of the weatherproof box with a damp തുണി. ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ ലായകങ്ങളോ ഉപയോഗിക്കരുത്.
• Monthly GFCI Test: It is recommended to manually test the GFCI monthly by pressing the "TEST" button and then the "RESET" button. This verifies its proper operation.
• കേടുപാടുകൾക്കായി പരിശോധിക്കുക: Regularly inspect the box and cover for any signs of physical damage, cracks, or wear. Replace the unit if any damage is observed.

6. പ്രശ്‌നപരിഹാരം

• GFCI Will Not Reset:

  സാധ്യമായ കാരണം: A ground fault exists in the circuit or connected appliance. The GFCI is faulty. Power is off to the circuit.

  പരിഹാരം: Unplug all appliances from the GFCI and any downstream outlets. Try to reset. If it resets, plug appliances back in one by one to identify the faulty appliance. If it still won't reset, check the circuit breaker. If the breaker is on and no appliances are connected, the GFCI may be faulty and needs replacement. Observe the indicator light: if it's RED, replacement is necessary.

• No Power to Receptacle:

  സാധ്യമായ കാരണം: GFCI is tripped. Circuit breaker is off. Loose wiring connection.

  പരിഹാരം: Press the "RESET" button on the GFCI. Check the circuit breaker in your electrical panel. Ensure all wiring connections are secure (only perform if power is off and you are qualified).

7 സ്പെസിഫിക്കേഷനുകൾ

Figure 3: Dimensions of the GFCI receptacle component.

8. വാറൻ്റിയും പിന്തുണയും

This BELL product is manufactured by Hubbell and is designed for durability and performance. For specific warranty information or technical support, please refer to the documentation included with your purchase or visit the official BELL/Hubbell webസൈറ്റ്. വാറൻ്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

For further assistance, you may contact BELL customer service through their official channels.