1. ആമുഖം
This manual provides essential information for the installation and care of your NISSAN Genuine Outside Mirror Cover, Part Number 96312-6A01H. This product is designed as a direct replacement or upgrade for compatible NISSAN vehicles. Please read this manual thoroughly before proceeding with installation to ensure proper fitment and safe use.
Image 1: NISSAN Genuine Outside Mirror Cover (Model 96312-6A01H). This image shows the exterior mirror cover, typically made of plastic, designed to fit over the side mirror housing.
2 സുരക്ഷാ വിവരങ്ങൾ
- Always ensure the vehicle is turned off and the parking brake is engaged before beginning any installation.
- ഇൻസ്റ്റാളേഷൻ സമയത്ത് കയ്യുറകൾ, കണ്ണ് സംരക്ഷണം തുടങ്ങിയ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ ധരിക്കുക.
- If you are unsure about any step of the installation process, it is recommended to seek assistance from a qualified automotive technician.
- ശ്വാസംമുട്ടൽ ഉണ്ടാകുന്നത് തടയാൻ ചെറിയ ഭാഗങ്ങൾ കുട്ടികളിൽ നിന്ന് അകറ്റി നിർത്തുക.
3 അനുയോജ്യത
This NISSAN Genuine Outside Mirror Cover (Part No. 96312-6A01H) is compatible with the following NISSAN vehicle models:
- അനുയോജ്യമായ വാഹന മോഡലുകൾ: Dayz, Dayz Roox
- Compatible Model Numbers: B21A, B21W
- Compatible Years: June 2013 - March 2015
പ്രധാനപ്പെട്ടത്: Vehicle compatibility may vary depending on the specific trim level or grade, even for the same model and year. Always verify compatibility with the manufacturer or a trusted automotive parts specialist before purchasing and attempting installation.
4. പാക്കേജ് ഉള്ളടക്കം
The package should contain the following item:
- 1 x NISSAN Genuine Outside Mirror Cover (Part No. 96312-6A01H)
Note: Additional tools or fasteners required for installation are not included and must be acquired separately.
5. ഇൻസ്റ്റലേഷൻ (സജ്ജീകരണം)
This section provides general guidelines for installing an outside mirror cover. Specific steps may vary depending on your vehicle's configuration. Professional installation is recommended.
- തയ്യാറാക്കൽ: Park the vehicle on a level surface, turn off the engine, and engage the parking brake.
- Access the Mirror: Depending on your vehicle model, you may need to gently pry off the existing mirror cover or remove a few screws to access the mounting points. Refer to your vehicle's service manual for precise instructions.
- പഴയ കവർ നീക്കം ചെയ്യുക: Carefully detach the old mirror cover. Be mindful of any clips or tabs that secure it. Avoid excessive force to prevent damage to the mirror assembly.
- പുതിയ കവർ ഇൻസ്റ്റാൾ ചെയ്യുക: Align the new NISSAN Genuine Outside Mirror Cover with the mirror housing. Ensure all clips and tabs are correctly positioned. Gently press the cover into place until it snaps securely.
- ഫിറ്റ്മെന്റ് പരിശോധിക്കുക: Check that the new cover is firmly attached and sits flush with the mirror assembly.
If you encounter any difficulties or resistance during installation, do not force the part. Re-check the compatibility and alignment, or consult a professional.
6. ഓപ്പറേഷൻ
The NISSAN Genuine Outside Mirror Cover is a passive component and does not require any operational procedures. Once correctly installed, it functions as a protective and aesthetic part of your vehicle's side mirror assembly.
7. പരിപാലനം
To maintain the appearance and longevity of your mirror cover:
- Clean the mirror cover regularly with mild automotive soap and water.
- ഫിനിഷിനെ നശിപ്പിക്കുന്ന ഉരച്ചിലുകളുള്ള ക്ലീനറുകളോ കഠിനമായ രാസവസ്തുക്കളോ ഉപയോഗിക്കുന്നത് ഒഴിവാക്കുക.
- Inspect the cover periodically for any signs of damage or loose fitment.
8. പ്രശ്നപരിഹാരം
If you encounter issues with your NISSAN Genuine Outside Mirror Cover:
- Poor Fitment: Double-check the part number against your vehicle's specifications. Ensure all clips and mounting points are correctly aligned and engaged.
- നാശം: If the cover arrives damaged or becomes damaged during installation, contact your supplier or the manufacturer for assistance.
For persistent issues, it is advisable to consult a professional automotive technician.
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| നിർമ്മാതാവ് | നിസ്സാൻ |
| ബ്രാൻഡ് | നിസ്സാൻ |
| ഉൽപ്പന്ന മോഡൽ നമ്പർ | 96312-6A01H |
| Genuine Part Number | 96312-6A01H |
| Compatible Vehicle Size | Dayz, Dayz Roox |
| ഇൻസ്റ്റലേഷൻ സ്ഥാനം | വലത്, ഇടത് |
| മിറർ ലെൻസ് തരം | കോൺവെക്സ് |
| ഉൽപ്പന്ന ഭാരം | 300 ഗ്രാം |
| പാക്കേജ് അളവുകൾ | 20 x 20 x 20 സെ.മീ |
10. വാറൻ്റിയും പിന്തുണയും
For information regarding the warranty of this NISSAN Genuine part, please contact the manufacturer directly. It is important to note that for high-value items, returns or cancellations may not be possible. Please confirm the part number and compatibility before placing your order.
For technical support or further inquiries, please refer to the official NISSAN support channels or consult your authorized NISSAN dealer.
