Honda Genuine Parts 08P32-T6Z-110 Rear Seat Cover Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

This manual provides instructions for the installation, use, and maintenance of the Honda Genuine Parts 08P32-T6Z-110 Rear Seat Cover. Designed specifically for the 2018 Honda Ridgeline, this custom-fit polyester seat cover offers heavy-duty protection for your vehicle's rear seats, making it ideal for active families.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Follow these steps to properly install your Honda Genuine Rear Seat Cover:

1. Prepare the Seats: Ensure the rear seats of your 2018 Honda Ridgeline are clean and free of debris before installation.
2. കവർ തുറക്കുക: Carefully unfold the seat cover and identify the top and bottom sections, as well as the left and right sides.
3. Position the Backrest Cover: Drape the backrest portion of the cover over the rear seat backrests. Align the cover with the contours of the seats and headrests. Ensure the "RIDGELINE" emblem is correctly oriented.
4. Secure the Backrest: Fasten any straps or elastic loops provided with the cover around the back of the seat or under the seat to hold the backrest portion securely in place. Ensure seatbelt access points are clear.
5. Position the Seat Base Cover: Place the seat base portion of the cover over the rear seat cushions. Smooth out any wrinkles.
6. Secure the Seat Base: Attach any hooks, elastic bands, or buckles under the seat to secure the base cover. Ensure a snug, custom fit.
7. Integrate Armrest/Cupholder: If your vehicle has a fold-down armrest with cupholders, ensure the seat cover allows for its proper function. The cover is designed to accommodate this feature, as shown in the image below.
8. അന്തിമ ക്രമീകരണങ്ങൾ: Adjust the cover to ensure all edges are tucked in and the fit is smooth and tight. Verify that all seatbelt buckles and child seat anchors are accessible and functional.

ചിത്രം 1: Installed Honda Genuine Rear Seat Cover. Note the integration with the center armrest and seatbelt access. The image illustrates the protective nature of the cover against spills and debris.

3. പ്രവർത്തനവും ഉപയോഗവും

Once installed, the seat cover requires no special operation. It is designed to protect your original upholstery from dirt, spills, and wear. Ensure that all seatbelts and child safety seat anchors remain fully accessible and functional after installation. The custom fit ensures that the rear armrest and cupholder can be used without obstruction.

4. പരിപാലനം

To maintain the longevity and appearance of your seat cover:

• വൃത്തിയാക്കൽ: For minor spills or dirt, wipe the surface with a damp cloth and mild soap. For more thorough cleaning, the polyester material can typically be spot cleaned or hand washed with a gentle detergent. Refer to any specific care labels on the product for detailed washing instructions.
• ഉണക്കൽ: Air dry the seat cover completely before reinstalling it to prevent mildew. Do not machine dry or expose to direct high heat.
• കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക: Do not use bleach, abrasive cleaners, or strong solvents, as these can damage the material and color.

5. പ്രശ്‌നപരിഹാരം

• മോശം ഫിറ്റ്: If the cover does not fit snugly, re-check the installation steps. Ensure all straps and fasteners are correctly secured and adjusted. The cover is designed for a custom fit on the 2018 Honda Ridgeline.
• ചുളിവുകൾ: Minor wrinkles may appear after initial installation. These often smooth out with use or can be gently smoothed by hand.
• പാടുകൾ: Address spills immediately. Blot liquids with a clean cloth. For stubborn stains, follow the cleaning instructions in Section 4.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

For specific warranty information regarding your Honda Genuine Parts 08P32-T6Z-110 Rear Seat Cover, please refer to the documentation included with your purchase or contact an authorized Honda dealer. For technical support or further assistance, please reach out to Honda Customer Service.