ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your MiLocks TKK-02SN Tkk-Sn Digital Keypad Door Knob Lock. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lock.
ചിത്രം 1: മുന്നിലും പിന്നിലും view of the MiLocks TKK-02SN Digital Keypad Door Knob Lock.
പ്രധാന സവിശേഷതകൾ
- കീലെസ്സ് എൻട്രി: Supports up to 6 unique keypad user codes for convenient access.
- ക്രമീകരിക്കാവുന്ന ലാച്ച്: Compatible with door thicknesses from 1 1/4" to 1 7/8" and features two backset settings (2 3/8" and 2 3/4").
- Audible Tones: Provides confirmation for locking, unlocking, and low battery warnings.
- Glow-in-the-Dark Keypad: Ensures visibility and ease of use in low-light conditions.
- മോടിയുള്ള ഡിസൈൻ: Engineered for long-lasting performance and security.
ചിത്രം 2: ഓവർview of the MiLocks TKK-02SN's key features including user input, audible tones, and glow-in-the-dark keypad.
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Installation of the MiLocks TKK-02SN is designed to be straightforward. A Philips screwdriver is the only tool required. Ensure your door meets the thickness requirements of 1 1/4" to 1 7/8".
1. സ്ട്രൈക്ക് പ്ലേറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക
Begin by installing the strike plate on your door frame using the provided screws. Ensure it is aligned correctly with the latch bore hole.
2. Adjust and Install the Latch
The latch has two settings for the backset (distance from the door edge to the center of the bore hole): 2 3/8 inches or 2 3/4 inches. Adjust the latch by pulling or pushing the drive slot as needed. Install the latch into the door edge, ensuring the curve of the latch strikes the lip of the strike plate correctly.
Figure 3: The adjustable latch can be extended or retracted to fit your door's backset measurement.
3. Install the Keypad and Back Module
Thread the connection wire from the keypad through the door above the latch. Insert the drive bar through the latch's drive slot. Position the mounting plate, ensuring the 'This Side Up' arrow is pointing upwards and the 'Wire' arrow points towards the door edge. Secure the mounting plate with screws, but do not overtighten initially to allow for adjustments.
Connect the two connection wires from the keypad and the back module. Carefully tuck the wires into the door. Align the back module with the mounting plate and secure it with the remaining screws. Ensure the thumb turn is in the horizontal (unlocked) position before final tightening.
ഇൻസ്റ്റലേഷൻ വീഡിയോ ഗൈഡ്
Video 1: Detailed installation guide for MiLocks Keyless Entry Lever/Knob Door Locks. This video demonstrates the steps for installing the latch, keypad, and back module.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
1. Initial Setup and Programming Codes
After installation, insert 4 fresh AA batteries (not included) into the back module. The lock will emit a beep to indicate it is powered on. To program user codes:
- Remove the battery cover from the back module.
- Press the 'S' (Set) button once. You will hear a beep.
- Within 5 seconds, enter your desired 2 to 8 digit code on the keypad.
- Press the 'Lock' button (bottom right). You will hear two beeps, confirming the code is set.
- Repeat for up to 6 unique user codes.
Programming Codes Video Guide
Video 2: This video provides a step-by-step guide on how to program user codes for your MiLocks TKK-02SN.
2. Deleting User Codes
To delete a specific user code:
- ബാറ്ററി കവർ നീക്കം ചെയ്യുക.
- Press the 'C' (Clear) button once. You will hear a beep.
- Within 5 seconds, enter the user code you wish to delete.
- Press the 'Lock' button. Two beeps confirm the code is deleted.
To delete all user codes, press and hold the 'C' button for approximately 10 seconds until you hear multiple beeps. This will reset all programmed codes.
3. Activating Auto-Lock
The auto-lock feature automatically locks the door after a set period (typically 10 seconds) once it's closed. To activate or deactivate this feature, locate the 'Auto Lock' switch inside the battery compartment and slide it to the 'On' or 'Off' position.
4. Illuminating the Keypad
To illuminate the keypad for use in dark conditions, press the 'Mi' button (top center) once. The keypad will light up, allowing you to enter your code.
മെയിൻ്റനൻസ്
ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ
The lock operates on 4 AA batteries (not included). When the batteries are low, the lock will emit an audible warning. Replace all four batteries with fresh, new ones promptly to ensure continuous operation. It is important to use new batteries as improperly stored batteries can expire.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Lock does not respond or keypad is dim. | കുറഞ്ഞതോ ചത്തതോ ആയ ബാറ്ററികൾ. | Replace all four AA batteries with new ones. |
| Keypad beeps but door does not unlock/lock. | Incorrect code entered; Latch mechanism obstructed or misaligned. | Ensure correct code is entered. Check for obstructions in the door frame or latch. Verify latch is properly adjusted for the door's backset. |
| Lock makes a clicking/grinding sound. | Latch not fully engaging or disengaging. | Check door alignment and ensure the latch can move freely. Adjust the strike plate if necessary. |
| Cannot delete a specific code. | തെറ്റായ നടപടിക്രമം പിന്തുടർന്നു. | Follow the 'Deleting User Codes' instructions carefully. Ensure the 'C' button is pressed once, then the code, then 'Lock'. |
| Lock feels loose or wobbly after installation. | Mounting screws not fully tightened. | Ensure all mounting screws for the mounting plate and back module are securely tightened. |
സ്പെസിഫിക്കേഷനുകൾ
- ബ്രാൻഡ്: മിലോക്സ്
- മോഡലിൻ്റെ പേര്: TKK-02SN (Tkk-Sn)
- ലോക്ക് തരം: കീപാഡ്
- മെറ്റീരിയൽ: നിക്കൽ
- നിറം: സാറ്റിൻ നിക്കൽ
- ഇനത്തിന്റെ അളവുകൾ (L x W x H): 10 x 5 x 5 ഇഞ്ച്
- ഇനത്തിൻ്റെ ഭാരം: 1 പൗണ്ട് (16 ഔൺസ്)
- ഊർജ്ജ സ്രോതസ്സ്: 4 AA ബാറ്ററികൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)
- വാതിൽ കനം അനുയോജ്യത: 1 1/4" - 1 7/8"
- Backset Settings: 2 3/8" and 2 3/4"
- ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ: Electronic Lock Assembly, Installation Hardware, Product Instructions, Traditional Keys (2)
വാറൻ്റിയും പിന്തുണയും
വാറൻ്റി വിവരങ്ങൾ
The MiLocks TKK-02SN comes with the following warranty:
- മെക്കാനിക്കൽ: 25 വർഷം
- ഇലക്ട്രിക്കൽ: 1 വർഷം
- ബാഹ്യ ഫിനിഷ്: ജീവിതകാലം
ഉപഭോക്തൃ പിന്തുണ
For further assistance or troubleshooting, please contact MiLocks Customer Service:
ഫോൺ: 1-800-355-0157
