Chevron 273282448

ഷെവ്‌റോൺ റാൻഡോ HDZ ISO 15 കോൾഡ് വെതർ ഹൈഡ്രോളിക് ഓയിൽ ഫ്ലൂയിഡ് യൂസർ മാനുവൽ

ബ്രാൻഡ്: ഷെവ്‌റോൺ

മോഡൽ: 273282448

1. ആമുഖം

Welcome to the user manual for Chevron Rando HDZ ISO 15 Cold Weather Hydraulic Oil Fluid. This document provides essential information for the safe and effective use, storage, and disposal of this product. Adhering to these guidelines will ensure optimal performance and safety.

A blue 5-gallon pail of Chevron Rando HDZ hydraulic oil with the Chevron logo on the front.

This image displays the standard packaging for the Chevron Rando HDZ ISO 15 Cold Weather Hydraulic Oil Fluid, a 5-gallon blue pail featuring the distinctive Chevron brand logo.

2 സുരക്ഷാ വിവരങ്ങൾ

Always prioritize safety when handling industrial fluids. Read and understand all safety data sheets (SDS) before use.

  • വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE): Wear appropriate PPE, including safety glasses or goggles, chemical-resistant gloves, and protective clothing, to prevent skin and eye contact.
  • വെൻ്റിലേഷൻ: Use in a well-ventilated area to avoid inhalation of vapors or mists. If adequate ventilation is not available, use respiratory protection.
  • Spill Response: In case of a spill, contain the fluid immediately. Absorb with inert material (e.g., sand, vermiculite) and place in appropriate disposal containers. Do not allow product to enter sewers or waterways.
  • പ്രഥമ ശ്രുശ്രൂഷ:
    • നേത്ര സമ്പർക്കം: Flush eyes with large amounts of water for at least 15 minutes. Seek medical attention if irritation persists.
    • ചർമ്മ സമ്പർക്കം: Wash affected area thoroughly with soap and water. Remove contaminated clothing.
    • ശ്വസനം: Move to fresh air. If breathing is difficult, administer oxygen. Seek medical attention.
    • ഉൾപ്പെടുത്തൽ: Do NOT induce vomiting. Call a poison control center or physician immediately.
  • അഗ്നി അപകടങ്ങൾ: This product is combustible. Keep away from open flames, sparks, and hot surfaces. Use foam, dry chemical, or carbon dioxide extinguishers.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

Chevron Rando HDZ ISO 15 is a high-performance, anti-wear hydraulic oil specifically formulated for use in hydraulic systems operating in cold weather conditions. It provides excellent protection against wear, rust, and corrosion, while maintaining stable viscosity across a wide temperature range. This fluid is designed to ensure reliable operation and extended component life in demanding industrial and mobile hydraulic applications.

4. സജ്ജീകരണവും തയ്യാറെടുപ്പും

  1. സിസ്റ്റം അനുയോജ്യത: Ensure that Chevron Rando HDZ ISO 15 is compatible with your hydraulic system's requirements and existing fluid. Consult your equipment manufacturer's manual for fluid specifications.
  2. ശുചിത്വം: Before adding new fluid, ensure the hydraulic system is clean and free from contaminants. If changing fluid types, consider flushing the system according to manufacturer recommendations.
  3. പരിശോധന: Inspect the pail for any signs of damage or tampering before opening.
  4. Opening the Pail: Carefully open the 5-gallon pail using appropriate tools to avoid spills.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

  1. സിസ്റ്റം പൂരിപ്പിക്കൽ: Slowly pour the hydraulic oil into the system's reservoir, using a clean funnel and filter to prevent contamination.
  2. ദ്രാവക നില: Fill to the recommended level indicated by the equipment manufacturer. Do not overfill.
  3. Bleeding Air: After filling, operate the hydraulic system slowly to bleed any trapped air from the lines and components. Check the fluid level again and top off if necessary.
  4. നിരീക്ഷണം: Regularly monitor the fluid level, color, and clarity. Any significant changes may indicate contamination or system issues.
  5. താപനില പരിധി: This fluid is designed for cold weather. Ensure operating temperatures remain within the recommended range for optimal performance.

6. പരിപാലനവും സംഭരണവും

  • സംഭരണം: Store the pail in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and incompatible materials. Keep the container tightly closed when not in use to prevent contamination.
  • മലിനീകരണ പ്രതിരോധം: Always use clean equipment and practices when handling hydraulic oil to prevent the introduction of dirt, water, or other contaminants into the system.
  • Fluid Analysis: Consider periodic fluid analysis to monitor the condition of the oil and identify potential issues before they lead to equipment failure.
  • നീക്കം ചെയ്യൽ: Dispose of used hydraulic oil and contaminated materials in accordance with all local, state, and federal regulations. Do not pour into drains or dispose of with household waste. Contact a licensed waste disposal contractor.

7. പ്രശ്‌നപരിഹാരം

ഇഷ്യൂസാധ്യമായ കാരണംപരിഹാരം
System sluggishness or slow operationLow fluid level, air in system, incorrect viscosity, or contaminated fluid.Check fluid level and top off. Bleed air from the system. Verify correct fluid type. Consider fluid replacement if contaminated.
Unusual noise (e.g., whining, cavitation)Air in system, pump cavitation due to restricted inlet, or low fluid level.Check fluid level. Inspect suction lines for blockages. Bleed air from the system.
Fluid discoloration or cloudinessWater contamination, oxidation, or particulate contamination.Identify source of contamination and rectify. Replace fluid and filter. Consider fluid analysis.
Excessive system temperatureOverloaded system, cooler malfunction, or incorrect fluid viscosity.Check system load. Inspect and clean cooler. Ensure correct fluid viscosity for operating conditions.

8 സ്പെസിഫിക്കേഷനുകൾ

ആട്രിബ്യൂട്ട്മൂല്യം
ബ്രാൻഡ്ഷെവ്റോൺ
മോഡൽ നമ്പർ273282448
മെറ്റീരിയൽധാതു, സിന്തറ്റിക്
പാക്കേജ് വിവരങ്ങൾപെയിൽ
ലിക്വിഡ് വോളിയം5 Gallons (640.0 Fluid Ounces)
ഇനത്തിൻ്റെ ഭാരം38 പൗണ്ട്
ശുപാർശ ചെയ്യുന്ന ഉപയോഗങ്ങൾഹൈഡ്രോളിക് ഓയിൽ
വിസ്കോസിറ്റിISO 150 (Note: Product title specifies ISO 15, but detailed specifications indicate ISO 150.)
ഉയർന്ന താപനില റേറ്റിംഗ്220 ഡിഗ്രി ഫാരൻഹീറ്റ് (104.4 ഡിഗ്രി സെൽഷ്യസ്)
ഇനം ഫോംഎണ്ണ
യു.പി.സി023968394349

9. വാറൻ്റിയും പിന്തുണയും

For specific warranty information or technical support regarding Chevron Rando HDZ ISO 15 Cold Weather Hydraulic Oil Fluid, please refer to the official Chevron website or contact Chevron customer service directly. Keep your purchase receipt and product details handy when seeking support.

കൂടുതൽ വിവരങ്ങളും ബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങളും നിങ്ങൾക്ക് ഇവിടെ കണ്ടെത്താനാകും Chevron Store on Amazon.

അനുബന്ധ രേഖകൾ - 273282448

പ്രീview Chevron Delo 400 SDE SAE 10W-30 Safety Data Sheet
Safety Data Sheet for Chevron Delo 400 SDE SAE 10W-30 Heavy Duty Motor Oil, detailing product identification, hazards, composition, first aid, fire fighting, handling, storage, exposure controls, physical properties, stability, toxicology, ecological information, disposal, transport, and regulatory information.
പ്രീview Chevron Delo 400 SD SAE 15W-30 Premium Diesel Engine Oil
Chevron Delo 400 SD SAE 15W-30 is a premium, innovative diesel engine oil designed for severe duty applications. It offers exceptional oxidation and deposit control, improved fuel economy, extended emission control system life, and managed inventory costs. Suitable for a wide range of diesel and gasoline engines, it meets stringent API CJ-4 standards and various OEM approvals.
പ്രീview ഡാംകോസ് ഹൈഡ്രോളിക് ഓയിൽ ശുപാർശകൾ: മറൈൻ ആപ്ലിക്കേഷനുകൾക്കുള്ള ബ്രാൻഡുകളും തരങ്ങളും
ഡാംകോസ് സിസ്റ്റങ്ങൾക്കായി ശുപാർശ ചെയ്യുന്ന ഹൈഡ്രോളിക് ഓയിൽ ബ്രാൻഡുകളുടെയും തരങ്ങളുടെയും ഒരു സമഗ്രമായ ലിസ്റ്റ് ഈ പ്രമാണം നൽകുന്നു, സമുദ്ര പരിതസ്ഥിതികളിലെ അങ്ങേയറ്റത്തെ സാഹചര്യങ്ങൾക്ക് അനുയോജ്യമായ മിനറൽ ഓയിലുകളും ബയോഡീഗ്രേഡബിൾ ഓപ്ഷനുകളും (EAL-കൾ) ഇതിൽ ഉൾപ്പെടുന്നു. ഉൽപ്പന്ന നാമങ്ങൾ, ISO മാനദണ്ഡങ്ങൾ, എണ്ണ തിരഞ്ഞെടുക്കുന്നതിനും കൈകാര്യം ചെയ്യുന്നതിനുമുള്ള പ്രധാന പരിഗണനകൾ എന്നിവ ഇതിൽ വിശദമായി പ്രതിപാദിക്കുന്നു.
പ്രീview Duchateau Inceptiv Curva Chevron 3D Wood Wall Panel Installation Guide
Comprehensive installation guide for Duchateau's Inceptiv Curva Chevron 3D wood wall panels. Covers recommended tools, preparation steps, fastening techniques, and special application considerations for a successful installation.
പ്രീview Woodcraft Chevron Die Cut Rollerball & Fountain Pen Kit Instructions
Detailed instructions for assembling Woodcraft's Chevron Die Cut Rollerball and Fountain Pen Kits, including setup, blank preparation, turning, finishing, and assembly steps.
പ്രീview mtu Engine Fluids and Lubricants Specifications: Oils, Coolants, and Fuels for Diesel Engines
This technical specification document from Rolls-Royce Solutions details approved fluids and lubricants for mtu Series Diesel Engines (including Marine), DDC S60 Off Highway and Two-Stroke Cycle Engines. It covers engine oils, coolants, and fuels, providing selection guidance, application restrictions, and requirements for exhaust gas aftertreatment (EGAT) systems. Excludes mtu Series 1000-1600, 1800. Includes approved product lists for various engine series like 2000, 4000, 8000, S60, 956 TB, and 1163.