ഷെവ്‌റോൺ സെറ്റസ് പി‌എ‌ഒ 46 എയർ കംപ്രസ്സർ ഓയിൽ ലൂബ്രിക്കന്റ് യൂസർ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

Chevron Cetus PAO 46 is a premium synthetic air compressor lubricant designed to provide excellent thermal and oxidation stability, extended drain intervals, and superior protection against wear and corrosion. It is formulated with polyalphaolefin (PAO) base oils, making it suitable for a wide range of rotary screw, rotary vane, and reciprocating air compressors operating under severe conditions.

Figure 1: Chevron Cetus PAO 46, 5 Gallon Pail. This image shows the standard packaging for the lubricant, a durable blue pail designed for industrial use.

This lubricant helps maintain compressor efficiency, reduce maintenance costs, and ensure reliable operation by minimizing sludge and varnish formation, even at high operating temperatures.

2 സാങ്കേതിക സവിശേഷതകൾ

Key specifications for Chevron Cetus PAO 46:

3 സുരക്ഷാ വിവരങ്ങൾ

Always handle industrial lubricants with care. Refer to the Safety Data Sheet (SDS) for comprehensive safety information. The SDS for Chevron Cetus PAO 46 is available from your supplier or the Chevron webസൈറ്റ്.

പൊതുവായ മുൻകരുതലുകൾ:

• വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE): Wear appropriate PPE, including safety glasses with side shields or chemical splash goggles, and chemical-resistant gloves (e.g., nitrile or neoprene) when handling.
• വെൻ്റിലേഷൻ: Use in a well-ventilated area. Avoid breathing oil mists or vapors.
• Spill Response: In case of spills, contain and absorb with inert material (e.g., sand, earth, vermiculite). Dispose of contaminated material according to local regulations. Prevent entry into sewers, waterways, or confined areas.
• അഗ്നി അപകടങ്ങൾ: This product has a high flash point. In case of fire, use foam, carbon dioxide, dry chemical, or water fog. Do not use a direct stream of water.

പ്രഥമ ശ്രുശ്രൂഷ:

• നേത്ര സമ്പർക്കം: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention if irritation persists.
• ചർമ്മ സമ്പർക്കം: Wash contaminated skin thoroughly with soap and water. Remove contaminated clothing and shoes. Get medical attention if irritation develops.
• ശ്വസനം: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
• ഉൾപ്പെടുത്തൽ: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.

4. സജ്ജീകരണവും തയ്യാറെടുപ്പും

Before introducing Chevron Cetus PAO 46 into your air compressor system, ensure proper preparation to maximize performance and prevent contamination.

1. Review Compressor Manual: Always consult your air compressor manufacturer's manual for specific lubricant requirements, compatibility, and recommended procedures for oil changes.
2. Draining Old Lubricant: Completely drain the existing lubricant from the compressor system while it is warm to ensure maximum removal of old oil and contaminants. This includes draining the oil reservoir, oil separator, and any associated lines.
3. ഫിൽട്ടർ മാറ്റിസ്ഥാപിക്കൽ: Replace all oil filters and air/oil separators. Old filters can harbor contaminants and restrict flow, compromising the new lubricant's performance.
4. System Flushing (If Necessary): If switching from a different type of lubricant (e.g., mineral oil to synthetic PAO), a system flush may be required to prevent incompatibility issues. Consult your compressor manufacturer or lubricant supplier for flushing procedures and compatible flushing fluids.
5. Inspect System: Visually inspect the compressor system for any leaks, damaged seals, or excessive sludge buildup that may need to be addressed before refilling.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these guidelines for filling your air compressor with Chevron Cetus PAO 46:

1. Ensure Compressor is Off and Depressurized: Before adding lubricant, ensure the compressor is completely shut down, locked out, and depressurized to prevent accidental startup or injury.
2. ഫിൽ പോർട്ട് കണ്ടെത്തുക: Identify the oil fill port on your air compressor. This is typically marked or indicated in the compressor's manual.
3. Use Clean Equipment: Use clean funnels and containers to transfer the lubricant from the pail to the compressor to prevent contamination.
4. Fill to Recommended Level: Carefully pour Chevron Cetus PAO 46 into the fill port until the oil level reaches the "full" or "operating" mark on the compressor's sight glass or dipstick. അമിതമായി പൂരിപ്പിക്കരുത്, as this can lead to foaming, oil carryover, and reduced efficiency.
5. Secure Fill Port: Replace and secure the fill port cap or plug.
6. പ്രാരംഭ ഓട്ടം: After filling, run the compressor for a short period (e.g., 15-30 minutes) and then shut it down. Recheck the oil level and top off if necessary, as some oil may have circulated through the system.

6. Lubricant Maintenance

Regular maintenance of your compressor's lubricant is crucial for optimal performance and longevity.

• Oil Level Checks: Routinely check the oil level using the compressor's sight glass or dipstick. Maintain the oil level within the recommended operating range. Low oil levels can lead to overheating and premature wear.
• എണ്ണ മാറ്റ ഇടവേളകൾ: While Chevron Cetus PAO 46 offers extended drain intervals, always adhere to the compressor manufacturer's recommended oil change schedule. For severe operating conditions, more frequent changes may be necessary. Regular oil analysis can help determine optimal drain intervals.
• ഫിൽട്ടർ മെയിന്റനൻസ്: Replace oil filters and air/oil separators according to the compressor manufacturer's recommendations or as indicated by pressure differential gauges. Clogged filters can reduce lubricant flow and efficiency.
• Monitor Oil Condition: Periodically inspect the lubricant for changes in color, odor, or the presence of water or particulate matter. Darkening, strong odors, or milky appearance can indicate contamination or degradation, signaling a need for an oil change.
• Prevent Contamination: Ensure the compressor system is sealed to prevent ingress of dust, moisture, and other contaminants that can degrade the lubricant.

7 സംഭരണവും കൈകാര്യം ചെയ്യലും

Proper storage and handling of Chevron Cetus PAO 46 will ensure its quality and extend its shelf life.

• സംഭരണ ​​സ്ഥലം: Store the pail in a cool, dry, well-ventilated area, away from direct sunlight, extreme temperatures, and sources of ignition.
• താപനില പരിധി: Avoid storing at temperatures below 0°C (32°F) or above 40°C (104°F) to maintain product integrity.
• കണ്ടെയ്നർ സമഗ്രത: Keep the container tightly closed when not in use to prevent contamination from moisture, dust, and other foreign materials. Store pails upright to prevent leaks.
• മലിനീകരണം ഒഴിവാക്കുക: Do not store near strong oxidizing agents or incompatible materials.
• കൈകാര്യം ചെയ്യൽ: Use appropriate lifting equipment when moving the 5-gallon pail due to its weight (38 pounds).

8. പ്രശ്‌നപരിഹാരം

While Chevron Cetus PAO 46 is designed for reliable performance, certain issues may arise. This section provides general guidance.

• Oil Discoloration: If the oil darkens prematurely, it could indicate excessive operating temperatures, oxidation, or contamination. Check compressor operating conditions and consider an oil analysis.
• Excessive Foaming: Foaming can be caused by water contamination, overfilling, or air leaks in the suction line. Check for water, ensure proper fill level, and inspect seals.
• അസാധാരണമായ മണം: A strong, burnt odor suggests overheating or severe oxidation. Investigate compressor operating temperatures and consider an immediate oil change.
• Reduced Compressor Efficiency: While not directly caused by the lubricant itself, issues like clogged filters or incorrect oil levels can impact efficiency. Ensure all maintenance schedules are followed.
• Oil Carryover: Excessive oil carryover into the compressed air line can be due to overfilling, a faulty air/oil separator, or high operating temperatures. Verify fill level and inspect the separator.

For persistent or severe issues, consult your compressor manufacturer's troubleshooting guide or contact a qualified service technician.

9. പരിസ്ഥിതി നിർമാർജനം

Proper disposal of used lubricant and containers is essential to protect the environment.

• Used Oil: Do not dispose of used oil into drains, sewers, soil, or watercourses. Used oil is considered hazardous waste in many regions and must be collected and recycled by authorized waste management facilities.
• Empty Containers: Empty pails should be thoroughly drained. Depending on local regulations, they may be recyclable or require disposal as industrial waste. Do not reuse empty containers for other purposes, especially for food or beverages.
• പ്രാദേശിക നിയന്ത്രണങ്ങൾ: Always comply with all local, regional, and national regulations regarding the disposal of used lubricants and their containers. Contact your local environmental agency for specific guidelines in your area.

10. വാറണ്ടിയും ഉപഭോക്തൃ പിന്തുണയും

Chevron products are manufactured to high-quality standards. For information regarding product warranty, please refer to Chevron's official warranty statements available on their corporate website or contact your authorized Chevron distributor.

For technical assistance, product inquiries, or safety data sheet requests, please visit the official Chevron website or contact their customer support line. Contact details can typically be found on the product label or Chevron's corporate webസൈറ്റ്.