MiLocks XF-02AQ ഡിജിറ്റൽ ഡെഡ്ബോൾട്ട് ഡോർ ലോക്ക് യൂസർ മാനുവൽ

1. ആമുഖം

This manual provides comprehensive instructions for the installation, programming, operation, maintenance, and troubleshooting of your MiLocks XF-02AQ Digital Deadbolt Door Lock. Please read these instructions carefully before installation and use to ensure proper function and longevity of your product.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The MiLocks XF-02AQ is a digital deadbolt door lock designed for exterior doors, offering keyless entry via a keypad and remote control. It features robust construction and user-friendly programming.

• Keyless keypad entry: Supports up to 6 different user codes.
• Remote control entry: Compatible with up to 10 radio frequency remote controls, effective up to 30 feet without obstructions.
• Multi-lock control: One remote can be programmed to control multiple MiLocks devices.
• Easy programming: Simple procedures for adding and deleting user codes.
• Smartphone compatibility: Integrates with Insteon home automation systems or as a standalone control lock using MorningLinc (sold separately).
• Bump-resistant cylinder for enhanced security.
• Intruder alarm: Activates after 4 failed keypad entry attempts.
• Backlit keypad for visibility in low light.
• Audible tones for lock, unlock, and low battery status.

ചിത്രം 1: മുൻഭാഗം view of the MiLocks XF-02AQ Digital Deadbolt Lock with remote control.

Figure 2: Front and back modules of the MiLocks XF-02AQ Digital Deadbolt Lock.

3. ഇൻസ്റ്റലേഷൻ

A Philips screwdriver is the only tool required for installation.

3.1. ഇൻസ്റ്റലേഷൻ ട്യൂട്ടോറിയൽ വീഡിയോ

3.2. ഘട്ടം ഘട്ടമായുള്ള ഇൻസ്റ്റാളേഷൻ

1. സ്ട്രൈക്ക് പ്ലേറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: Use the included screws to fasten the strike plate onto the frame of your door.
2. Install the Door Latch:
   • Our door latches have two settings depending on how far the main bore hole is from the edge of the door.
   • If your bore hole is 2 3/4 inches from the edge of the door: Twist the latch, extend it, then twist back to fit.
   • If your bore hole is 2 3/8 inches from the edge of the door: Twist the latch, retract it, then twist back to fit.
   • Before inserting the latch, ensure the 'UP' label is oriented correctly.
   • Insert the latch and secure it with the included screws.
   • Test the latch with a screwdriver to ensure smooth operation and keep it in the UNLOCKED position.
3. Prepare the Front Module: Remove the keys from the front module to avoid complications during installation.
4. മൗണ്ടിംഗ് പ്ലേറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുക: The mounting plate with screws will secure the front module to the door. Thread the connection wire through the bottom opening and the drive bar through the center. Fasten with screws, but not too tight initially to allow for slight adjustments. Tighten securely afterwards.
5. Install the Back Module:
   • First, remove the battery cover from the back module.
   • Ensure the thumb-turn is in the UNLOCKED position, similar to the latch. To do this, turn the thumb-turn AWAY from the latch.
   • Locate the connection wire on the back of the back module and the cross slot for the drive bar.
   • Connect the two wires together (from the front module and back module).
   • Install the back module, making sure the drive bar goes into the cross slot. It is very important that the drive bar is oriented vertically when going through the cross slot of the latch. If not, your door lock will not work properly.
   • Secure the back module with mounting screws.
6. ബാറ്ററികൾ ഇൻസ്റ്റാൾ ചെയ്യുക: Insert 4 brand new AA Alkaline batteries into the battery tray.
7. ബാറ്ററി കവർ മാറ്റിസ്ഥാപിക്കുക: ബാറ്ററി കവർ വീണ്ടും ഓൺ ചെയ്യുക.
8. ടെസ്റ്റ് ലോക്ക്: Engage the lock using the thumb-turn on the back module, then test with the key on the front module.

4. ഉപയോക്തൃ കോഡുകൾ പ്രോഗ്രാമിംഗ്

This section details how to program user codes for your MiLocks XF-02AQ Digital Deadbolt Door Lock.

4.1. Programming Tutorial Video

4.2. Main Controls Overview

The main controls are located under the battery cover on the back module:

• സി ബട്ടൺ: ബട്ടൺ മായ്‌ക്കുക
• എസ് ബട്ടൺ: ബട്ടൺ സജ്ജമാക്കുക
• 1&2 Switch: This switch serves two purposes:
  1. Changes the rotation of the drive bar (depending on whether the deadbolt was installed on a left or right side).
  2. Must be set to the '2' position to program user codes.

4.3. Clearing All Codes

1. Set the 1&2 Switch to the '2' position. You will hear a beep.
2. Press and hold the 'C' Button for 10-15 seconds.
3. A double beep confirms that all saved codes are cleared. A triple beep indicates an error; please try again.

4.4. Adding and Storing a User Code

1. Set the 1&2 Switch to the '2' position.
2. Press and release the 'S' Button. You will hear a beep.
3. On the keypad, enter your preferred code (2-8 digits), followed by the Unlock Button.
4. A double beep confirms the code is saved. A triple beep indicates an error; please try again.
5. Repeat to add more user codes.

4.5. Removing a Stored User Code

1. Set the 1&2 Switch to the '2' position.
2. Press and release the 'C' Button. You will hear a beep.
3. On the keypad, enter the previously stored/saved code you wish to remove, followed by the Unlock Button.
4. A double beep confirms the code is removed. A triple beep indicates an error; please try again.

5. ഓപ്പറേഷൻ

5.1. വാതിൽ പൂട്ടൽ

• കീപാഡ്: Press the Lock Button on the keypad.
• റിമോട്ട് കൺട്രോൾ: Press the Lock button on your remote control.
• കീ: Insert the traditional key into the cylinder and turn to engage the deadbolt.
• Thumb-Turn: From the inside, rotate the thumb-turn on the back module to engage the deadbolt.

5.2. വാതിൽ തുറക്കുന്നു

• കീപാഡ്: Enter a valid user code followed by the Unlock Button.
• റിമോട്ട് കൺട്രോൾ: Press the Unlock button on your remote control.
• കീ: Insert the traditional key into the cylinder and turn to disengage the deadbolt.
• Thumb-Turn: From the inside, rotate the thumb-turn on the back module to disengage the deadbolt.

ചിത്രം 3: ക്ലോസപ്പ് view of the MiLocks remote control.

6. പരിപാലനം

6.1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The lock uses 4 AA Alkaline batteries. When the batteries are low, the lock will emit an audible tone. Replace all 4 batteries with brand new ones promptly to ensure continuous operation.

1. Slide off the battery cover from the back module.
2. പഴയ ബാറ്ററികൾ നീക്കം ചെയ്യുക.
3. Insert 4 new AA Alkaline batteries, ensuring correct polarity.
4. ബാറ്ററി കവർ മാറ്റിസ്ഥാപിക്കുക.

6.2. വൃത്തിയാക്കൽ

ലോക്ക് വൃത്തിയാക്കാൻ, ഒരു സോഫ്റ്റ് ഉപയോഗിക്കുക, ഡിamp cloth. Avoid abrasive cleaners or solvents, as these can damage the finish or electronic components.

7. പ്രശ്‌നപരിഹാരം

• ലോക്ക് ഇടപഴകുന്നില്ല/വിച്ഛേദിക്കുന്നു:
  • Check the 1&2 switch under the battery cover. If the lock does not engage, set the 1&2 switch to the opposite number.
  • Ensure the drive bar is correctly oriented vertically through the cross slot of the latch. Incorrect orientation will prevent proper function.
  • Verify that the door latch is installed correctly and moves freely.
• Programming Errors (Triple Beep): A triple beep during programming indicates an error. Re-read the programming steps carefully and try again. Ensure you are pressing the buttons correctly and in the right sequence.
• Intruder Alarm: The intruder alarm triggers after 4 failed keypad entry attempts. If this occurs, verify the correct code and try again.
• കുറഞ്ഞ ബാറ്ററി അലേർട്ട്: The lock will emit an audible tone when batteries are low. Replace all 4 AA Alkaline batteries with new ones immediately.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റി വിവരങ്ങൾ

The MiLocks XF-02AQ Digital Deadbolt Door Lock comes with the following warranty coverage:

• Electrical Warranty: 1 വർഷം
• മെക്കാനിക്കൽ വാറന്റി: 25 വർഷം
• Exterior Finish Warranty: ജീവിതകാലം

10. പിന്തുണ

For additional tutorials, videos, or any questions regarding your MiLocks XF-02AQ Digital Deadbolt Door Lock, please contact us or visit our webസൈറ്റ്:

• കസ്റ്റമർ സർവീസ്: 1-800-355-0157
• Webസൈറ്റ്: www.mipentagon.com