ആമുഖം
This manual provides detailed instructions for the proper installation, operation, and maintenance of your new LUXOR WB6040W Wall-Mounted Magnetic Whiteboard. Please read all instructions carefully before beginning installation to ensure safe and correct setup. This whiteboard is designed for use in office and educational environments, offering a durable and versatile surface for writing and displaying magnetic items.
ബോക്സിൽ എന്താണുള്ളത്
- LUXOR WB6040W Whiteboard (60"W x 40"H)
- Mounting Brackets (4x)
- Hardware (Screws and Drywall Anchors)
- Detachable Marker Tray
ആവശ്യമായ ഉപകരണങ്ങൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല)
- ടേപ്പ് അളവ്
- ചോക്ക് ലൈൻ
- ഡ്രിൽ
- 1/4 "ഡ്രിൽ ബിറ്റ്
- Phillips Head Screwdriver (or Extended Drive)
- Hammer (or Soft Mallet)
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
ഇൻസ്റ്റലേഷൻ കഴിഞ്ഞുview വീഡിയോ
Watch this official Luxor video for a visual guide on installing your WB Series Whiteboard. This video demonstrates the key steps for a successful wall-mounted installation.
Video: Luxor 60"W x 40"H Wall-Mounted Magnetic Whiteboard Installation Guide.
വിശദമായ ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
Refer to the diagram below and follow these steps for proper installation. Note: Hardware provided is for drywall installation. If attaching to other material, such as concrete, other fasteners may be required.
Image: Detailed installation diagram with measurements and hardware components.
- Insert Marker Tray: Insert the detachable marker tray into the bottom groove of your whiteboard. Slide the tray to the center.
Image: Attaching the marker tray to the whiteboard.
- Determine Placement & Mark Chalk Lines: Determine the general location for your whiteboard. Snap two horizontal chalk lines on the wall at the heights indicated in the installation diagram (refer to the diagram for specific measurements based on your whiteboard size).
Image: Whiteboard dimensions and general placement.
- തുളകൾ: For drywall installation, drill four 1/4-inch holes at the marked locations as specified in the instruction sheet.
Image: The whiteboard itself, indicating where holes would be drilled on the wall behind it.
- Insert Drywall Anchors: Place the plastic drywall inserts into the pre-drilled holes. Use a soft mallet or hammer to gently tap the inserts until they are flush with the wall surface.
- Attach Lower Brackets: Attach the bottom mounting brackets to the wall using the long screws provided. Ensure the brackets are attached at their lowest possible position to allow for adjustment.
- Attach Upper Brackets: Attach the top mounting brackets to the wall using the long screws provided. Ensure the brackets are attached at their highest possible position. These will be tapped down later.
- Place Whiteboard: Carefully place the whiteboard onto the lower brackets, ensuring it is centered with the middle lower bracket.
- സുരക്ഷിതമായ മുകളിലെ ബ്രാക്കറ്റുകൾ: Tap the top brackets down so they are touching the top of the whiteboard. Then, attach the brackets to the whiteboard frame using the short screws provided.
- പ്രൊട്ടക്റ്റീവ് ഫിലിം നീക്കം ചെയ്യുക: Carefully remove the plastic protective film from the front surface of the whiteboard.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
Your Luxor WB6040W whiteboard is ready for use immediately after installation. Use only dry-erase markers on the whiteboard surface. The magnetic surface allows for attaching notes, documents, or other magnetic accessories.
- എഴുതുന്നു: Use any standard dry-erase markers.
- Erasing: Use a dry-erase eraser or a soft cloth. For stubborn marks, use a specialized dry-erase board cleaner.
- കാന്തിക ഉപയോഗം: Attach magnetic items directly to the board surface.
മെയിൻ്റനൻസ്
Proper maintenance will ensure the longevity and optimal performance of your whiteboard.
- പതിവ് വൃത്തിയാക്കൽ: Wipe the board clean with a dry-erase eraser after each use.
- ആഴത്തിലുള്ള വൃത്തിയാക്കൽ: For ghosting or residue, use a dry-erase board cleaning spray and a soft cloth. Do not use abrasive cleaners or materials.
- Marker Tray: Keep the marker tray clean of dust and marker residue.
- Avoid Permanent Markers: Never use permanent markers or oil-based pens on the dry-erase surface.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your whiteboard, try the following solutions:
| പ്രശ്നം | പരിഹാരം |
|---|---|
| Ghosting or Stains: Marks remain after erasing. | Use a specialized dry-erase board cleaner. Ensure you are using only dry-erase markers. |
| Board is not level: Appears crooked on the wall. | Check the installation of the mounting brackets. Adjust the top brackets by tapping them further down or slightly loosening and re-tightening as needed. Ensure chalk lines were level during initial setup. |
| Markers not erasing cleanly: Ink is difficult to remove. | Ensure markers are fresh and specifically labeled as "dry-erase." Old or low-quality markers can leave residue. Clean the board thoroughly with dry-erase cleaner. |
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | WB6040W (FBA_WB6040W) |
| അളവുകൾ (W x H) | 60 ഇഞ്ച് x 40 ഇഞ്ച് |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 1 x 60 x 40 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 29 പൗണ്ട് |
| മെറ്റീരിയൽ | Aluminum Frame, Painted Steel Surface |
| മൗണ്ടിംഗ് തരം | മതിൽ മൗണ്ട് |
| നിറം | വെള്ള |
വാറൻ്റിയും പിന്തുണയും
For warranty information, technical support, or to purchase replacement parts, please visit the official Luxor webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവന വിഭാഗവുമായി ബന്ധപ്പെടുകയോ ചെയ്യുക. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
ഉദ്യോഗസ്ഥൻ Webസൈറ്റ്: www.luxorfurn.com
