Sealey SMS255 Double Sliding Compound Mitre Saw 250mm

1. ആമുഖവും ഉൽപ്പന്നവും കഴിഞ്ഞുview

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your Sealey SMS255 Double Sliding Compound Mitre Saw 250mm. Please read this manual thoroughly before initial use and retain it for future reference.

The Sealey SMS255 is a powerful 1800W compound mitre saw designed for precise cutting of wood and other specified materials. It features double slides for enhanced control, a 60-tooth TCT blade, and integrated work piece supports. For improved accuracy, the unit is equipped with an LED work light and a laser guide.

ചിത്രം 1.1: ഓവർview of the Sealey SMS255 Double Sliding Compound Mitre Saw.

This image displays the complete Sealey SMS255 Double Sliding Compound Mitre Saw from a front-left perspective, showcasing its main components including the motor housing, blade guard, cutting table, and sliding rails.

2 സുരക്ഷാ വിവരങ്ങൾ

Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury or damage to the tool.

• മാനുവൽ വായിക്കുക: പ്രവർത്തനത്തിന് മുമ്പ് എല്ലാ നിർദ്ദേശങ്ങളും മുന്നറിയിപ്പുകളും മനസ്സിലാക്കുക.
• വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (PPE): എപ്പോഴും സുരക്ഷാ ഗ്ലാസുകൾ, ശ്രവണ സംരക്ഷണം, പൊടി മാസ്ക് എന്നിവ ധരിക്കുക.
• ജോലി ഏരിയ: Keep the work area clean, well-lit, and free from obstructions. Ensure adequate ventilation.
• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure the power supply matches the tool's requirements (230V). Do not operate in damp അല്ലെങ്കിൽ ആർദ്ര സാഹചര്യങ്ങൾ.
• ബ്ലേഡ് സുരക്ഷ: Ensure the blade is correctly installed and sharp. Never attempt to remove jammed material while the saw is running.
• സുരക്ഷിത വർക്ക്പീസ്: എപ്പോഴും clamp the workpiece firmly before cutting to prevent movement.
• നിയന്ത്രണം നിലനിർത്തുക: Keep hands clear of the blade path. Use both hands to operate the saw when possible.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ പ്ലഗ് അൺപ്ലഗ് ചെയ്യുക: Disconnect the saw from the power supply before making adjustments, changing blades, or performing maintenance.

3. ഘടകങ്ങളും അസംബ്ലിയും

The Sealey SMS255 comes with essential components for immediate use and convenience.

ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ:

• വർക്ക്പീസ് Clamp
• Dust Extraction Bag
• കൈകാര്യം ചെയ്യുക
• 60-tooth TCT Blade (pre-installed)

പ്രാരംഭ സജ്ജീകരണം:

1. അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the saw and all components from the packaging. Inspect for any shipping damage.
2. സ്ഥാനനിർണ്ണയം: Place the saw on a stable, level workbench or stand. Ensure sufficient space for workpiece movement and safe operation.
3. Attach Workpiece Clamp: വർക്ക്പീസ് cl സുരക്ഷിതമാക്കുകamp to the saw table as shown in Figure 3.1. This clamp is crucial for holding material securely during cuts.
4. ഡസ്റ്റ് ബാഗ് ഇൻസ്റ്റാൾ ചെയ്യുക: Connect the dust extraction bag to the dust port. For optimal dust collection, consider connecting to an external dust extraction system.
5. പവർ കണക്ഷൻ: Connect the saw to a suitable 230V power outlet.

Figure 3.1: Workpiece clamp ഉപയോഗത്തിലാണ്.

This image shows a close-up of the workpiece clamp holding a piece of wood firmly against the saw's fence, demonstrating its function in securing material for accurate and safe cutting.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Follow these steps for safe and effective operation of your mitre saw.

1. മെറ്റീരിയൽ തയ്യാറാക്കൽ: Ensure the workpiece is free of nails, screws, or other foreign objects that could damage the blade.
2. Adjusting Mitre Angle: Loosen the mitre lock handle and pivot the turntable to the desired angle. The saw features locking increments at 0°, 15°, 22.5°, 30°, and 45° Left & Right. Securely tighten the handle.
3. ബെവൽ ആംഗിൾ ക്രമീകരിക്കൽ: For bevel cuts, adjust the saw head tilt to the desired angle (up to 45°). Lock the bevel adjustment securely.
4. Positioning Workpiece: Place the workpiece firmly against the fence and secure it with the workpiece clamp. Ensure the cutting line aligns with the laser guide.
5. Activating Laser and LED: The integrated laser guide and LED work light can be activated to assist with precise alignment and illumination of the cutting area.
6. ഒരു കട്ട് ഉണ്ടാക്കുന്നു:
   • Hold the saw handle firmly.
   • Press the trigger to start the motor and allow the blade to reach full speed.
   • Slowly lower the saw head through the workpiece, applying steady, even pressure.
   • For wider materials, utilize the double sliding feature by pulling the saw head forward, lowering the blade, and pushing it back through the material. The slides can be locked at different lengths for greater control.
   • മുറിക്കൽ പൂർത്തിയായിക്കഴിഞ്ഞാൽ, ട്രിഗർ വിടുക, സോ ഹെഡ് ഉയർത്തുന്നതിന് മുമ്പ് ബ്ലേഡ് പൂർണ്ണമായും നിർത്താൻ അനുവദിക്കുക.

Figure 4.1: Saw in operation, cutting wood.

This image captures the Sealey SMS255 mitre saw in action, with the blade descending through a wooden workpiece, illustrating the cutting process.

5. പരിപാലനം

Regular maintenance ensures the longevity and optimal performance of your saw.

• പവർ വിച്ഛേദിക്കുക: Always unplug the saw before performing any maintenance or cleaning.
• വൃത്തിയാക്കൽ: After each use, clean dust and debris from the saw, especially around the blade guard, motor vents, and sliding rails. Use a brush or compressed air.
• പൊടി വേർതിരിച്ചെടുക്കൽ: Regularly empty the dust extraction bag. If using an external system, ensure its filters are clean and connections are secure.
• ബ്ലേഡ് പരിശോധന: Periodically inspect the blade for sharpness, damage, or missing teeth. A dull blade can cause kickback and poor cut quality.
• ബ്ലേഡ് മാറ്റിസ്ഥാപിക്കൽ: When replacing the blade, ensure the new blade is compatible (250 x 3.2 x Ø30mm) and installed with the correct rotation direction. Model No. SMS255B multipurpose blade is available for mild steel, aluminium, and wood with nails.
• ലൂബ്രിക്കേഷൻ: Keep the sliding rails clean and lightly lubricated to ensure smooth operation.

Figure 5.1: Dust extraction port.

ഈ ചിത്രം ഒരു ക്ലോസ്-അപ്പ് നൽകുന്നു view of the dust extraction port on the Sealey SMS255, highlighting the connection point for the dust bag or an external dust collection system.

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your mitre saw.

7 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the Sealey SMS255 Double Sliding Compound Mitre Saw.

8. വാറൻ്റിയും പിന്തുണയും

Your Sealey SMS255 Double Sliding Compound Mitre Saw is covered by a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions.

For technical support, spare parts, or warranty claims, please contact Sealey customer service or your authorized Sealey dealer. Ensure you have your model number (SMS255) and purchase details available when contacting support.

For more information, visit the official Sealey webസൈറ്റ്: www.sealey.co.uk