Kungfuking Automatic Pop-Up Outlet Surge Protector User Manual

1. ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of your Kungfuking Automatic Pop-Up Outlet Surge Protector. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• 4 US AC Outlets: 15A/125V/1875W capacity for standard electrical devices.
• 2 USB പോർട്ടുകൾ: 2.4A total maximum output for charging mobile devices.
• 1 RJ45 Port: നെറ്റ്‌വർക്ക് കണക്റ്റിവിറ്റിക്കായി.
• 1 HDMI പോർട്ട്: For video and audio transmission.
• 5W Wireless Charging Station: Integrated on the top surface for Qi-compatible devices.
• Automatic Retractable Design: Pop-up and retract mechanism for discreet integration.

3. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

• The socket is non-waterproof. Protect it from water spray and liquids.
• Install this product in a location inaccessible to children to ensure personal safety.
• Always check for obstructions that could interfere with the unit's operation before use or retraction.
• വീടിനുള്ളിൽ മാത്രം ഉപയോഗിക്കുക.
• Do not disassemble or modify the unit. Refer to qualified personnel for repairs.
• Ensure the power cord is not pinched or damaged during installation or use.

4. സജ്ജീകരണം

4.1 ആവശ്യമായ ഉപകരണങ്ങൾ

• Hole saw (4.7 inches / 120mm diameter)
• ഡ്രിൽ
• അളക്കുന്ന ടേപ്പ്
• സുരക്ഷാ കയ്യുറകളും കണ്ണ് സംരക്ഷണവും

4.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ

1. ഉപരിതലം തയ്യാറാക്കുക: Choose a suitable location on your countertop, desk, or table. Ensure there is sufficient clearance below the surface for the unit to retract fully (approximately 5.90 inches / 150mm depth).

   Image: Diagram showing the pop-up outlet's dimensions, including a hidden length of 5.90 inches and a required hole diameter of 4.7 inches (±0.5 inches).

2. ദ്വാരം തുരത്തുക: Using a 4.7-inch (±0.5 inches) hole saw, carefully drill a circular hole through the chosen surface.

   Image: Step-by-step diagram illustrating the installation process, starting with drilling a 4.8-inch diameter hole.
3. യൂണിറ്റ് ചേർക്കുക: Unscrew and remove the retaining ring from the bottom of the pop-up outlet. Insert the main body of the outlet into the drilled hole from the top.
4. യൂണിറ്റ് സുരക്ഷിതമാക്കുക: From underneath the surface, screw the retaining ring back onto the unit and tighten it securely to hold the pop-up outlet in place.
5. പവർ ബന്ധിപ്പിക്കുക: Plug the power cord of the pop-up outlet into a standard 125V AC wall outlet.

   Image: The pop-up outlet is shown installed in a desk, providing power and charging for a laptop and smartphone.

4.3 ഇൻസ്റ്റലേഷൻ വീഡിയോ

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 Extending the Unit

Gently press down on the top surface of the unit. The unit will automatically rise, revealing the AC outlets, USB ports, RJ45 port, and HDMI port.

Image: The pop-up outlet is shown in its extended position on a desk, ready for use.

5.2 Retracting the Unit

When not in use, gently push down on the top surface of the unit until it locks flush with the countertop. Ensure no cables are obstructing the retraction mechanism.

Image: The pop-up outlet is shown retracted and flush with a kitchen island countertop, maintaining a clean surface.

5.3 വയർലെസ് ചാർജിംഗ്

Place your Qi-compatible smartphone or device on the top surface of the unit for 5W wireless charging. Remove phone cases thicker than 6mm for optimal charging performance.

Image: A smartphone is shown wirelessly charging on the top surface of the pop-up outlet.

6. പരിപാലനം

• Clean the surface of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Regularly check the power cord for any signs of damage. If damaged, discontinue use and contact customer support.
• Ensure the retraction mechanism is free from debris to prevent jamming.

7. പ്രശ്‌നപരിഹാരം

7.1 ട്രബിൾഷൂട്ടിംഗ് വീഡിയോ

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact Kungfuking customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.