HobbyWing Quicrun 1060 Brushed ESC Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The HobbyWing Quicrun 1060 Brushed Electronic Speed Controller (ESC) is engineered for 1/10 and 1/12 scale remote-controlled cars and trucks. This waterproof unit offers reliable performance and is designed for ease of use, featuring a Tamiya battery plug for broad compatibility. It supports various running modes and battery types, making it a versatile choice for brushed motor setups.

Figure 1: HobbyWing Quicrun 1060 Brushed ESC

2. ബോക്സിൽ എന്താണുള്ളത്?

• Hobbywing speed control with Tamiya battery plug

3 പ്രധാന സവിശേഷതകൾ

• 60 Amp Power: Provides robust power delivery for brushed motors.
• Waterproof Electronics: Ensures reliable operation in various environmental conditions.
• Multiple Running Modes: Supports Forward/Reverse/Brake, Forward/Brake, and Forward/Reverse modes.
• LiPo Cutoff Capability: Compatible with LiPo batteries up to 3S, with built-in low voltage cutoff protection.
• Integrated Tamiya Battery Plug: Simplifies connection to common RC battery packs.

Figure 2: Tamiya Logo, indicating compatible battery plug type.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1 വയറിംഗ് കണക്ഷനുകൾ

1. മോട്ടോർ കണക്ഷൻ: Connect the ESC's motor wires (blue and yellow) to your brushed motor. The order may affect motor rotation; reverse if necessary.
2. ബാറ്ററി കണക്ഷൻ: Plug your battery pack into the ESC's Tamiya connector. Ensure correct polarity.
3. റിസീവർ കണക്ഷൻ: Plug the ESC's signal cable (usually black, red, white/yellow) into the throttle channel (typically Channel 2) of your RC receiver.
4. വൈദ്യുതി സ്വിച്ച്: Mount the power switch in an accessible location on your vehicle.

4.2 Jumper Cap Settings

The Quicrun 1060 ESC uses jumper caps to configure various settings, including running mode, battery type, and BEC output voltage. Refer to the detailed chart in your physical user manual for specific configurations. Incorrect settings can damage the ESC or battery.

Key Jumper Settings:

• പ്രവർത്തിക്കുന്ന മോഡ്: Select between Forward/Reverse/Brake, Forward/Brake, or Forward/Reverse.
• ബാറ്ററി തരം: Choose between NiMH or LiPo to ensure proper low voltagഇ കട്ട്ഓഫ്.
• BEC ഔട്ട്പുട്ട് വോളിയംtage: വോളിയം ക്രമീകരിക്കുകtage supplied to your receiver and servos (e.g., 6.0V or 7.4V).

4.3 ത്രോട്ടിൽ കാലിബ്രേഷൻ

To ensure proper operation, the ESC must be calibrated to your transmitter's throttle range. Follow these general steps:

1. Turn on your transmitter and ensure all throttle trims are at neutral.
2. ESC-ലേക്ക് ബാറ്ററി ബന്ധിപ്പിക്കുക.
3. Hold the throttle stick at full throttle (highest position) and turn on the ESC.
4. The motor will emit a series of beeps. Once you hear the first beep, move the throttle stick to full brake (lowest position).
5. After another series of beeps, move the throttle stick to the neutral position.
6. The ESC will emit a final series of beeps, indicating successful calibration.

5 ഓപ്പറേറ്റിംഗ് മോഡുകൾ

The Quicrun 1060 ESC offers three primary operating modes, configurable via jumper caps:

• Forward/Reverse/Brake Mode: Standard mode for general driving, allowing forward, reverse, and braking.
• Forward/Brake Mode: Ideal for racing, providing only forward movement and braking, with no reverse.
• Forward/Reverse Mode: Suitable for rock crawling or specific applications where immediate reverse is needed without a brake delay.

Consult your user manual's jumper cap chart for detailed instructions on how to select each mode.

6. പരിപാലനം

• വൃത്തിയാക്കൽ: Regularly clean the ESC to remove dirt, dust, and debris. Use a soft brush or compressed air.
• പരിശോധന: Periodically check all wires and connectors for signs of wear, damage, or loose connections.
• സംഭരണം: Store the ESC in a dry, cool environment away from direct sunlight and extreme temperatures.

7. പ്രശ്‌നപരിഹാരം

• ശക്തിയില്ല: Check battery connection, power switch, and ensure the battery is charged.
• മോട്ടോർ പ്രതികരിക്കുന്നില്ല: Verify receiver connection, throttle calibration, and motor wiring.
• ക്രമരഹിതമായ പ്രവർത്തനം: Re-calibrate the throttle range. Check for interference or loose connections.
• അമിത ചൂടാക്കൽ: Ensure proper ventilation around the ESC. Check motor load and gearing.

For more detailed troubleshooting, refer to the comprehensive troubleshooting guide in your user manual or contact HobbyWing support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official HobbyWing webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.