1. ആമുഖം
This manual provides essential information for the Toyota Genuine Front Brake Tube No. 2, Part Number 47312-22060. This component is a critical part of your vehicle's braking system, designed to ensure proper fluid transfer and maintain braking performance. Adherence to these instructions is crucial for safe and effective operation.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Toyota Genuine Front Brake Tube No. 2 (Part No. 47312-22060) is an authentic replacement part manufactured to Toyota's specifications. It is designed to connect various components within the front brake system, facilitating the hydraulic pressure required for braking. Using genuine parts ensures compatibility and maintains the original performance and safety standards of your vehicle.
Image 2.1: Toyota Genuine Front Brake Tube No. 2, Part Number 47312-22060. This image displays the part number and brand logo, indicating an authentic Toyota component.
3 അനുയോജ്യത
This front brake tube is compatible with specific Toyota models and production years. It is essential to verify compatibility with your vehicle before installation. Consult your vehicle's service manual or a qualified technician to confirm fitment.
- അനുയോജ്യമായ മോഡലുകൾ: Chaser, Cresta, Mark II
- Compatible Model Codes: GX50, GX51, GX60, GX61, LX60, LX67, MX60, MX63, RX60, RX63, SX60, TX50, TX60, TX67
- Applicable Production Years: March 1980 - July 1984
കുറിപ്പ്: Vehicle compatibility may vary by specific grade or trim level. Always cross-reference with your vehicle's VIN and manufacturer specifications.
4 സ്പെസിഫിക്കേഷനുകൾ
| സ്പെസിഫിക്കേഷൻ | വിശദാംശങ്ങൾ |
|---|---|
| നിർമ്മാതാവ് | ടൊയോട്ട |
| ഭാഗം നമ്പർ | 47312-22060 |
| ഇനം മോഡൽ നമ്പർ | 47312-22060 |
| ഇനത്തിൻ്റെ ഭാരം | 10.6 ഔൺസ് (ഏകദേശം 300 ഗ്രാം) |
| പാക്കേജ് അളവുകൾ | 7.87 x 7.87 x 7.87 ഇഞ്ച് (ഏകദേശം 20 x 20 x 20 സെ.മീ) |
| ഇനത്തിൻ്റെ പാക്കേജ് അളവ് | 1 |
| ASIN | B01M0T4GSX |
5. ഇൻസ്റ്റലേഷൻ മാർഗ്ഗനിർദ്ദേശങ്ങൾ
Installation of brake system components requires specialized knowledge and tools. Improper installation can lead to brake failure, serious injury, or death. It is strongly recommended that this part be installed by a certified automotive technician.
5.1 സുരക്ഷാ മുൻകരുതലുകൾ
- സുരക്ഷാ ഗ്ലാസുകളും കയ്യുറകളും ഉൾപ്പെടെ ഉചിതമായ വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ (പിപിഇ) എപ്പോഴും ധരിക്കുക.
- ജോലി ആരംഭിക്കുന്നതിന് മുമ്പ് വാഹനം നിരപ്പായ പ്രതലത്തിലുള്ള ജാക്ക് സ്റ്റാൻഡുകളിൽ സുരക്ഷിതമായി ഉറപ്പിച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
- ആകസ്മികമായ വൈദ്യുത ഷോർട്ട് ഷോർട്ട് ഒഴിവാക്കാൻ വാഹനത്തിന്റെ ബാറ്ററി വിച്ഛേദിക്കുക.
- Handle brake fluid with care, as it can damage paint and is harmful if ingested.
5.2 പൊതുവായ ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ (പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ ശുപാർശ ചെയ്യുന്നു)
- തയ്യാറാക്കൽ: Gather all necessary tools, including flare nut wrenches, line wrenches, a torque wrench, and fresh brake fluid.
- Locate and Access: Identify the specific front brake tube to be replaced. This may require removing wheels and other components for access.
- Drain Brake Fluid: If necessary, drain a small amount of brake fluid from the reservoir to prevent spills when disconnecting lines.
- Disconnect Old Tube: Carefully loosen and remove the fittings connecting the old brake tube. Be prepared for residual brake fluid to leak.
- പഴയ ട്യൂബ് നീക്കം ചെയ്യുക: Detach any clips or brackets securing the old tube and remove it from the vehicle.
- പുതിയ ട്യൂബ് ഇൻസ്റ്റാൾ ചെയ്യുക: Route the new Toyota Genuine Front Brake Tube (Part No. 47312-22060) in the exact path of the old one. Ensure it is not kinked or stressed.
- ഫിറ്റിംഗുകൾ ബന്ധിപ്പിക്കുക: Hand-tighten the fittings at both ends of the new tube. Then, use a torque wrench to tighten them to the manufacturer's specified torque values. Overtightening or undertightening can cause leaks or damage.
- സുരക്ഷിത ട്യൂബ്: Reattach any clips or brackets to secure the new tube, preventing vibration or contact with other components.
- Bleed Brake System: After installation, the brake system must be properly bled to remove any air that entered the lines. Follow the vehicle manufacturer's bleeding procedure. This typically involves a two-person process or a specialized bleeding tool.
- ടെസ്റ്റ് ബ്രേക്കുകൾ: With the engine off, pump the brake pedal several times to build pressure. The pedal should feel firm. Start the engine and test the brakes at a low speed in a safe area before driving normally. Check for any leaks around the new tube's connections.
മുന്നറിയിപ്പ്: Do not drive the vehicle if the brake pedal feels spongy or if there are any signs of brake fluid leaks.
6. പരിപാലനം
Regular inspection of your vehicle's brake system, including brake tubes, is vital for safety. While the brake tube itself requires minimal maintenance, its surrounding components do.
- പതിവ് പരിശോധന: During routine vehicle maintenance, visually inspect the brake tubes for signs of corrosion, damage, kinks, or leaks.
- ബ്രേക്ക് ഫ്ലൂയിഡ്: Check brake fluid level regularly and replace it according to your vehicle manufacturer's recommendations. Old or contaminated brake fluid can lead to corrosion within the brake lines.
- വൃത്തിയാക്കൽ: Keep the undercarriage and brake components clean to prevent accumulation of dirt and salt, which can accelerate corrosion.
7. പ്രശ്നപരിഹാരം
If you experience issues with your braking system after replacing a brake tube, consider the following common problems:
- സ്പോഞ്ചി ബ്രേക്ക് പെഡൽ: This usually indicates air in the brake lines. The system needs to be bled again thoroughly.
- Brake Fluid Leak: Check all connections for proper tightening. Ensure flare nuts are not cross-threaded or damaged. Inspect the brake tube itself for any damage that might have occurred during installation.
- കുറഞ്ഞ ബ്രേക്കിംഗ് പ്രകടനം: Could be due to air in the lines, insufficient brake fluid, or issues with other brake components. Re-check the entire system.
- മുന്നറിയിപ്പ് വിളക്കുകൾ: If a brake warning light illuminates, stop driving immediately and have the vehicle inspected by a qualified technician.
പ്രധാനപ്പെട്ടത്: Any issues with the braking system should be addressed immediately by a qualified professional. Do not attempt to drive a vehicle with compromised brakes.
8. വാറൻ്റിയും പിന്തുണയും
As a Toyota Genuine Part, this brake tube is covered by Toyota's standard warranty for genuine replacement parts. For specific warranty terms, conditions, and duration, please refer to your original purchase documentation or contact an authorized Toyota dealership or service center.
For technical support or further assistance, please contact your local authorized Toyota service center or visit the official Toyota webസൈറ്റ്.
- ഔദ്യോഗിക ടൊയോട്ട Webസൈറ്റ്: www.toyota.com
- ഉപഭോക്തൃ പിന്തുണ: Refer to your region's Toyota customer service contact information.
