RISCO RK150DTG300B Dual Technology Ceiling Detector User Manual

1. ആമുഖം

This manual provides essential information for the proper installation, operation, and maintenance of your RISCO RK150DTG300B Dual Technology Ceiling Detector. This advanced security device offers 360° coverage, combining passive infrared (PIR) and microwave (MW) technologies for reliable motion detection in various environments.

For optimal performance and safety, please read this manual thoroughly before installation and use. Keep it for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

WARNING: Risk of electric shock. Installation should only be performed by qualified personnel.

• ഏതെങ്കിലും ഇൻസ്റ്റാളേഷനോ അറ്റകുറ്റപ്പണിയോ നടത്തുന്നതിന് മുമ്പ് വൈദ്യുതി വിച്ഛേദിക്കുക.
• എല്ലാ വയറിംഗും പ്രാദേശിക ഇലക്ട്രിക്കൽ കോഡുകളും ചട്ടങ്ങളും പാലിക്കുന്നുണ്ടെന്ന് ഉറപ്പാക്കുക.
• ഉപകരണത്തിൽ ഈർപ്പം, തീവ്രമായ താപനില, നേരിട്ടുള്ള സൂര്യപ്രകാശം എന്നിവ ഏൽക്കരുത്.
• ഈ ഉപകരണം ഇൻഡോർ ഉപയോഗത്തിനായി മാത്രം രൂപകൽപ്പന ചെയ്തിട്ടുള്ളതാണ്.
• Tampering with the device may void the warranty and compromise security.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ എല്ലാ ഇനങ്ങളും ഉണ്ടെന്ന് ഉറപ്പാക്കുക:

• RISCO RK150DTG300B Dual Technology Ceiling Detector Unit
• മൗണ്ടിംഗ് ഹാർഡ്‌വെയർ (സ്ക്രൂകൾ, ആങ്കറുകൾ)
• ഉപയോക്തൃ മാനുവൽ (ഈ പ്രമാണം)

ചിത്രം 1: മുൻഭാഗം view of the RISCO RK150DTG300B Dual Technology Ceiling Detector.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The RK150DTG300B is designed for ceiling mounting to provide optimal 360° detection coverage.

4.1. സൈറ്റ് തിരഞ്ഞെടുക്കൽ

• Choose a central location on the ceiling within the area to be protected.
• Avoid mounting near heat sources, air conditioning vents, or areas with significant air drafts that could cause false alarms.
• Ensure the detection area is clear of large obstructions.

4.2. Mounting the Detector

1. Carefully separate the detector's base from its cover.
2. Position the base on the chosen ceiling location and mark the drilling points.
3. Drill holes and insert appropriate anchors if necessary.
4. Secure the detector base to the ceiling using the provided screws.

ചിത്രം 2: ഉദാample of detector mounting points and internal components.

4.3. വയറിംഗ്

The RK150DTG300B is powered by an electrical cable. Connect the detector to your security system's control panel according to the panel's instructions and the detector's terminal markings.

• പവർ കണക്ഷൻ: Connect the power supply wires to the designated terminals.
• അലാറം put ട്ട്‌പുട്ട്: Connect the alarm output to the appropriate zone input on your control panel.
• Tamper ഔട്ട്പുട്ട്: ടി ബന്ധിപ്പിക്കുകamper output to a 24-hour tamper zone on your control panel. The detector features anti-removal and anti-opening tampഎർ സംരക്ഷണം.
• EOL റെസിസ്റ്ററുകൾ: Integrated End-Of-Line (EOL) resistors are selectable via jumpers. Refer to your control panel's manual for the required EOL resistor values and configure the detector accordingly.

4.4. Configuration and Testing

• Anti-Cloak Technology (ACT): This feature enhances detection capabilities by identifying attempts to mask the infrared signal.
• Green Line Feature: Allows for the deactivation of the microwave (MW) channel when the security system is disarmed, reducing power consumption and potential interference. This is typically configured during installation.
• നടത്ത പരിശോധന: After installation, perform a walk test to verify the detector's coverage and sensitivity. Walk through the entire protected area to ensure the detector triggers an alarm. Adjust sensitivity if necessary (refer to specific jumper settings or potentiometers if available on the device, though not explicitly detailed in product description).

5. ഡിറ്റക്ടർ പ്രവർത്തിപ്പിക്കുക

The RISCO RK150DTG300B operates automatically once properly installed and powered. It continuously monitors the protected area using its dual technology sensors.

• ഡ്യുവൽ ടെക്നോളജി: The detector combines Passive Infrared (PIR) and Microwave (MW) detection. Both technologies must typically be triggered simultaneously to generate an alarm, significantly reducing false alarms.
• 360° കവറേജ്: The ceiling mount design provides a full 360-degree detection pattern, covering an area up to 13 meters in diameter.
• Tampഎർ സംരക്ഷണം: The integrated anti-removal and anti-opening tamper switches will trigger an alarm if the detector is tampered with or forcibly removed from its mounting location.

6. പരിപാലനം

To ensure the long-term reliability and performance of your detector, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Periodically clean the detector's lens and housing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• പതിവ് പരിശോധന: Perform a walk test at least once a year, or as recommended by your security system provider, to confirm proper operation.
• പരിശോധന: Visually inspect the detector for any signs of damage or loose connections.

7. പ്രശ്‌നപരിഹാരം

If you experience issues with your RK150DTG300B detector, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, contact your security system installer or RISCO technical support.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

For warranty information, please refer to the terms and conditions provided by your point of purchase or contact RISCO Group directly. RISCO Group products are typically covered by a limited warranty against defects in materials and workmanship.

For technical support, installation assistance, or further inquiries, please contact your authorized RISCO installer or visit the official RISCO Group webപിന്തുണാ ഉറവിടങ്ങൾക്കായുള്ള സൈറ്റ്.

നിർമ്മാതാവ്: RISCO Group

Webസൈറ്റ്: www.riscogroup.com