1. ആമുഖം
The Steinel IS 360-1 is a high-performance infrared motion detector designed for recessed mounting. It offers a 360-degree detection angle and a maximum range of 4 meters, making it suitable for various indoor and outdoor applications such as under eaves, carports, and suspended ceilings. This detector is compatible with all bulb types, including up to six LEDs, and features optional permanent lighting. It provides adjustable time and twilight settings for customized operation.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
- ഇലക്ട്രിക്കൽ ഇൻസ്റ്റാളേഷൻ: Installation must be performed by a qualified electrician in accordance with national wiring regulations and electrical operating conditions.
- വൈദ്യുതി വിച്ഛേദിക്കൽ: Always disconnect the power supply before attempting any installation, maintenance, or repair work.
- നാശനഷ്ട പരിശോധന: Do not operate the product if it shows any signs of damage.
- ഉദ്ദേശിച്ച ഉപയോഗം: Use the product only for its intended purpose as described in this manual. Any modifications or alterations are not permitted.
- IP54 റേറ്റിംഗ്: The device has an IP54 rating, indicating protection against dust and splashing water. Ensure proper sealing during installation to maintain this rating.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
The Steinel IS 360-1 is an infrared motion detector that responds to heat radiation from moving objects. Its compact design allows for discreet recessed installation. The sensor features a multi-lens system for precise detection.
ചിത്രം 3.1: ക്ലോസപ്പ് view of the Steinel IS 360-1 recessed motion detector.
Figure 3.2: Illustration of how an infrared sensor detects heat radiation from moving objects.
4. ഇൻസ്റ്റലേഷൻ (സജ്ജീകരണം)
The IS 360-1 is designed for recessed ceiling mounting. Ensure the mounting location is stable and provides adequate space for the device and wiring.
4.1 മൗണ്ടിംഗ് അളവുകൾ
Figure 4.1: Technical drawing with dimensions. The detector has a diameter of 78mm and requires a mounting depth of 89mm, with a cutout diameter of 66mm.
4.2 ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ
- മൗണ്ടിംഗ് ഹോൾ തയ്യാറാക്കുക: Create a circular cutout in the ceiling with a diameter of 66mm.
- വയറിംഗ്: Connect the electrical wires to the terminal block inside the detector housing. Ensure correct polarity and secure connections. The device operates on 240 Volts.
- Insert Detector: Carefully push the detector into the prepared hole. The spring clips will secure it in place.
- അന്തിമ ക്രമീകരണം: Ensure the sensor lens is facing the desired detection area.
Figure 4.2: Illustration of the recessed ceiling installation process.
5. ഓപ്പറേഷൻ
Once installed and powered, the Steinel IS 360-1 motion detector will automatically switch on connected lights when it detects movement within its 360-degree detection zone. The light will remain on for the set time duration and will only activate when the ambient light level falls below the set twilight threshold.
Figure 5.1: The Steinel IS 360-1 motion detector installed in a ceiling, providing illumination upon detection.
6. ക്രമീകരണങ്ങൾ ക്രമീകരിക്കൽ
The IS 360-1 offers continuous adjustment for both time and twilight settings, as well as the detection area.
6.1 Time Setting (Time)
This dial controls how long the light remains switched on after motion is detected. It is continuously adjustable from approximately 8 seconds to 35 minutes.
6.2 Twilight Setting (Lux)
This dial determines the ambient brightness level at which the sensor becomes active. Turning it towards the sun symbol means the sensor will only activate in brighter conditions (e.g., during the day), while turning it towards the moon symbol means it will activate in darker conditions (e.g., at dusk or night).
Figure 6.1: Adjustable dials for time and twilight settings.
6.3 Detection Area Adjustment
The 360-degree detection area can be precisely adapted to your needs using the supplied blanking segments. These segments can be inserted into the lens to block out specific areas where detection is not desired, preventing unwanted triggering (e.g., from public pathways).
Figure 6.2: Diagram showing the 360-degree detection area and the use of blanking segments for customization.
7. പരിപാലനം
The Steinel IS 360-1 motion detector is maintenance-free. For cleaning, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the lens or housing. Ensure no moisture enters the device.
8. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Light does not switch on. | വൈദ്യുതി വിതരണം ഇല്ല. Twilight setting too high. Detection area blocked. | പവർ കണക്ഷൻ പരിശോധിക്കുക. Adjust twilight setting (towards moon symbol). Check for obstructions in the detection zone. |
| Light switches on too frequently. | Detection area too wide. Time setting too long. | Use blanking segments to narrow detection area. Reduce time setting. |
| വെളിച്ചം തുടർച്ചയായി തുടരുന്നു. | Permanent ON function activated (if applicable). കണ്ടെത്തൽ മേഖലയിൽ തുടർച്ചയായ ചലനം. | Check if permanent ON is enabled and disable if not desired. Adjust detection area or time setting. |
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | 032845 |
| നിർമ്മാതാവ് | സ്റ്റീനെൽ |
| അളവുകൾ (L x W x H) | 8.9 x 7.8 x 7.8 സെ.മീ |
| ഭാരം | 120 ഗ്രാം |
| നിറം | വെള്ള |
| പവർ ഉറവിടം | കോർഡഡ് ഇലക്ട്രിക് |
| വാല്യംtage | 240 വോൾട്ട് |
| പരമാവധി. സ്വിച്ചിംഗ് കപ്പാസിറ്റി | 1000 വാട്ട്സ് |
| ബൾബ് തരം അനുയോജ്യത | LED (up to 6), Incandescent, Halogen |
| കണ്ടെത്തൽ ആംഗിൾ | 360 ഡിഗ്രി |
| പരമാവധി. പരിധി | 4 മീറ്റർ |
| സമയ ക്രമീകരണം | 8 seconds - 35 minutes (continuously adjustable) |
| Twilight Setting | തുടർച്ചയായി ക്രമീകരിക്കാവുന്നത് |
| IP റേറ്റിംഗ് | IP54 |
| മൗണ്ടിംഗ് തരം | സീലിംഗ് മൗണ്ട് (റീസഡ്) |
| പ്രവർത്തന താപനില | 40 ഡിഗ്രി സെൽഷ്യസ് വരെ |
| മാതൃരാജ്യം | റൊമാനിയ |
10. വാറൻ്റിയും പിന്തുണയും
Steinel products are manufactured to the highest quality standards. This product comes with a 1-year availability of spare parts. For warranty claims, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official Steinel webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.
