APS CL6360H Main Upper Stainless Steel Black Mesh Rivet Grille Insert Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

This document provides installation and maintenance instructions for the APS CL6360H Main Upper Stainless Steel Black Mesh Rivet Grille Insert. This product is designed to enhance the front appearance of your vehicle by adding a custom grille overlay.

Image 1.1: Two APS CL6360H black mesh rivet grille inserts, showing their design and construction.

2 അനുയോജ്യത

This grille insert is compatible with the following vehicle models:

• Chevy Silverado 1500 (Model Years: 2016, 2017, 2018)
• Chevy Silverado 1500 LD (Model Year: 2019)

പ്രധാന കുറിപ്പ്:

• Not compatible with Z71 and High Country models.
• This product is a grille insert only; the original equipment (OE) grille shell remains on the vehicle after installation. Logo, emblem, frame, or shell are not included.

3. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജ് തുറക്കുമ്പോൾ, എല്ലാ ഘടകങ്ങളും ഉണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക:

• Main Upper Grille Insert (1.8mm Wire Mesh Rivet Style, Black, Quantity: 2 pieces)
• Mounting Hardware (screws, clamps, മുതലായവ)
• Installation Paper (detailed instructions)

ഏതെങ്കിലും ഇനങ്ങൾ നഷ്ടപ്പെട്ടാലോ കേടുപാടുകൾ സംഭവിച്ചാലോ, ദയവായി ഉടൻ തന്നെ ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.

4. സജ്ജീകരണം (ഇൻസ്റ്റലേഷൻ)

This grille insert utilizes a Bolt Over/Overlay/Bolton installation method, which requires drilling. The original grille shell must remain on the vehicle. Professional installation is recommended.

ആവശ്യമായ ഉപകരണങ്ങൾ (ഉൾപ്പെടുത്തിയിട്ടില്ല):

• ഡ്രിൽ
• Drill bits (appropriate size for mounting hardware)
• അളക്കുന്ന ടേപ്പ് അല്ലെങ്കിൽ ഭരണാധികാരി
• മാർക്കർ അല്ലെങ്കിൽ പെൻസിൽ
• Protective eyewear and gloves

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

1. തയ്യാറാക്കൽ: Ensure the vehicle's front end, particularly the existing grille area, is clean and free of debris.
2. സ്ഥാനനിർണ്ണയം: Carefully place the new grille insert over the existing OE grille shell. Align it to ensure proper fitment and desired aesthetic.
3. ഡ്രിൽ പോയിൻ്റുകൾ അടയാളപ്പെടുത്തുന്നു: Once aligned, use a marker or pencil to accurately mark the drilling locations through the tabs on the new grille insert onto the OE grille shell.
4. ഡ്രില്ലിംഗ്: Remove the new grille insert. Using the marked points, carefully drill pilot holes into the OE grille shell. Ensure drill bit size matches the provided mounting hardware to avoid damage.
5. Securing the Insert: Reposition the new grille insert. Align the tabs with the drilled holes. Use the provided mounting hardware (screws, clamps) to secure the insert firmly to the OE grille shell. Ensure all connections are tight and secure.
6. അന്തിമ പരിശോധന: Verify that the grille insert is securely mounted and does not obstruct any vehicle functions or lighting.

ചിത്രം 4.1: ഉദാample of the APS CL6360H grille insert installed on a compatible Chevy Silverado 1500. Note that the original grille shell remains.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The APS CL6360H grille insert is a static cosmetic and protective component. It does not require any operational procedures after installation. Once properly installed, it functions passively to enhance vehicle aesthetics and provide a layer of protection to the radiator area.

6. പരിപാലനം

To ensure the longevity and appearance of your grille insert, follow these maintenance guidelines:

• പതിവ് വൃത്തിയാക്കൽ: Clean the grille insert regularly with mild automotive soap and water. Use a soft cloth or sponge to avoid scratching the powder-coated finish.
• കഠിനമായ രാസവസ്തുക്കൾ ഒഴിവാക്കുക: അബ്രാസീവ് ക്ലീനറുകളോ, ലായകങ്ങളോ, കഠിനമായ രാസവസ്തുക്കളോ ഉപയോഗിക്കരുത്, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
• ഫാസ്റ്റനറുകൾ പരിശോധിക്കുക: Periodically check all mounting hardware to ensure they remain tight and secure. Re-tighten if necessary.
• നാശനഷ്ട പരിശോധന: Inspect the grille for any signs of damage (e.g., bent mesh, loose rivets) after impacts or off-road driving. Address any issues promptly.

7. പ്രശ്‌നപരിഹാരം

This section addresses common concerns that may arise during or after installation.

Issue: Grille insert does not align properly or fit flush.

സാധ്യമായ കാരണങ്ങൾ:

• Incorrect vehicle model or year.
• Tabs on the insert are bent or misaligned.
• Drill holes on the OE grille shell are not accurately placed.

പരിഹാരം:

• Double-check vehicle compatibility against the product specifications.
• Carefully inspect the grille insert for any manufacturing defects or shipping damage. Gently adjust tabs if slightly bent, but avoid excessive force.
• Ensure precise marking and drilling of holes. If holes are significantly off, professional assistance may be required.

Issue: Mounting hardware feels loose after installation.

സാധ്യമായ കാരണങ്ങൾ:

• Hardware not tightened sufficiently.
• Incorrect drill bit size used, resulting in oversized holes.

പരിഹാരം:

• Re-tighten all mounting hardware. Do not overtighten to avoid stripping threads or damaging components.
• If holes are oversized, consider using larger washers or alternative fastening methods (e.g., rivet nuts) with professional guidance.

For issues not covered here, please refer to the "Warranty and Support" section.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

APS is committed to customer satisfaction. If you encounter any quality problems with your grille insert, please do not hesitate to contact our customer service team.

While specific warranty details are not provided in this manual, APS offers professional and sincere service to resolve product-related issues.

For assistance, please contact APS customer support through the retailer's platform or the official APS webസൈറ്റ്.