Fluval Flex Freshwater Kit - Black - 15 Gallon Instruction Manual

ആമുഖം

The Fluval Flex Freshwater Kit (Model 15006) is a contemporary aquarium designed for freshwater use. It features a distinctive curved front, customizable LED lighting, and a powerful 3-stage filtration system to provide optimal water quality for aquatic life. This manual provides detailed instructions for setup, operation, and maintenance.

സുരക്ഷാ വിവരങ്ങൾ

മുന്നറിയിപ്പ്: ഈ ഉൽപ്പന്നത്തിൽ കാൻസർ, ജനന വൈകല്യങ്ങൾ അല്ലെങ്കിൽ മറ്റ് പ്രത്യുൽപാദന തകരാറുകൾ എന്നിവയ്ക്ക് കാരണമാകുന്ന കാലിഫോർണിയ സംസ്ഥാനത്തിന് അറിയപ്പെടുന്ന രാസവസ്തുക്കൾ അടങ്ങിയിരിക്കുന്നു.

Always follow local electrical codes and safety guidelines when installing and operating electrical equipment near water. Ensure all connections are secure and dry before plugging into a power source. Do not immerse electrical components in water unless explicitly designed for submersion.

പാക്കേജ് ഉള്ളടക്കം

The Fluval Flex Freshwater Kit includes the following components:

• Glass Aquarium with Cover and Anti-Slip Pad
• LED Lighting System (7500K White + RGB LEDs)
• FLEXPad Remote Control
• സുരക്ഷിതം, കുറഞ്ഞ വോളിയംtagഇ ട്രാൻസ്ഫോർമർ
• Circulation Pump with Multi-Directional Dual Output Nozzle (132 US Gal/h / 500 L/h)
• Foam Filter Block with Handle (Mechanical Filtration)
• Activated Carbon Insert (Chemical Filtration)
• BioMax Insert (Biological Filtration)

Note: Submersible heater (e.g., Fluval M50W Heater) and protein skimmer (e.g., PS2 Mini Protein Skimmer) are sold separately and are not included in this kit.

Image: The Fluval Flex 15 Gallon Aquarium Kit, displaying the glass tank, LED light, remote, pump, and filter media.

സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

1. പ്ലേസ്മെന്റ്

Place the aquarium on a sturdy, level surface capable of supporting the full weight of the tank when filled with water and decorations. Ensure it is away from direct sunlight, heat sources, and areas with significant temperature fluctuations.

2. Filter Media Installation

1. Remove all filter media from their protective plastic bags.
2. Rinse the Activated Carbon Insert and BioMax Insert thoroughly under cool tap water before use to remove any dust.
3. Place the Foam Filter Block into the designated rear filter compartment.
4. Insert the rinsed Activated Carbon into the top section of the foam filter block.
5. Insert the rinsed BioMax into the bottom section of the foam filter block.

Image: A diagram illustrating the three-stage filtration system, showing the placement of foam, carbon, and Biomax media within the rear compartment.

3. Pump and Output Nozzle Setup

6. Connect the flexible rubber tube to the circulation pump and the multi-directional dual output nozzle.
7. Securely place the assembled pump and output nozzle into the rear filter compartment. Ensure all connections are tight to prevent leaks.
8. Position the multi-directional dual outputs to achieve desired water flow within the aquarium.

4. LED Lighting System Installation

9. Attach the LED lighting system to the designated slot on the aquarium cover.
10. Connect the LED light to the safe, low voltage transformer, and then plug the transformer into a power outlet.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the LED lighting system, highlighting its adjustable 7500K White + RGB LEDs.

5. Filling the Aquarium

11. Carefully fill the aquarium with dechlorinated freshwater. Avoid disturbing the substrate.
12. Add any desired decorations or live plants.
13. Allow the tank to cycle for several weeks before introducing fish to establish beneficial bacteria.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

LED ലൈറ്റിംഗ് നിയന്ത്രണം

The LED lighting system is controlled via the included FLEXPad remote.

• Use the remote to adjust the 7500K White + RGB LEDs for endless color blends.
• Select from various special effects such as fading cloud cover and lightning bolts.
• The light fixture itself may also feature a touch-sensitive control for basic day/night illumination toggling.

Image: The FLEXPad remote control, displaying buttons for color selection, brightness adjustment, and special lighting effects.

മെയിൻ്റനൻസ്

Filter Media Replacement

Regular replacement of filter media is crucial for maintaining optimal water quality.

• Replace the Activated Carbon Insert every 2-4 weeks.
• Replace the BioMax Insert every 2-3 months.
• To ensure constant presence of beneficial bacteria, do not replace all filtration media at the same time.

ജല മാറ്റങ്ങൾ

Perform regular partial water changes (e.g., 25% weekly) to remove accumulated nitrates and replenish essential minerals.

The easy feed top cover opening and removable lid facilitate convenient access for maintenance.

ട്രബിൾഷൂട്ടിംഗ്

കുറഞ്ഞ ജലപ്രവാഹം

• Check the circulation pump for blockages or debris. Clean the pump and impeller if necessary.
• Ensure filter media is not excessively clogged. Replace mechanical filter media (foam) if heavily soiled.

LED Remote Not Responding

• Check the battery in the FLEXPad remote.
• Ensure the infrared remote sensor on the canopy is clear of obstructions.

Water Discoloration or Odor

• Replace the Activated Carbon Insert.
• Perform a partial water change.
• Check for decaying organic matter (e.g., uneaten food, dead plants/fish) and remove it.

സ്പെസിഫിക്കേഷനുകൾ

Image: A diagram showing the dimensions of the Fluval Flex 15 Gallon aquarium.

വാറൻ്റിയും പിന്തുണയും

This product is covered by a Manufacturer Warranty. For specific details regarding your warranty, please refer to the documentation included with your purchase or contact Fluval customer support.

കൂടുതൽ ഉൽപ്പന്ന വിവരങ്ങൾക്കും പിന്തുണയ്ക്കും, സന്ദർശിക്കുക Fluval Store.