BRITAX Boulevard ClickTight US കാർ സീറ്റ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1 പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

Please read this entire instruction manual carefully before installing or using your BRITAX Boulevard ClickTight US Car Seat. Failure to follow these instructions can result in serious injury or death to your child. Keep this manual in the designated storage area on the car seat for future reference.

• Always secure your child in the car seat according to the instructions.
• നിങ്ങളുടെ കുട്ടിയെ ഒരിക്കലും കാർ സീറ്റിൽ ശ്രദ്ധിക്കാതെ വിടരുത്.
• Ensure the car seat is correctly installed in your vehicle before each use.
• Do not use accessories or parts not approved by Britax.

2. ഉൽപ്പന്നം കഴിഞ്ഞുview

The BRITAX Boulevard ClickTight US Car Seat is designed to provide safety and comfort for your child from infancy through toddlerhood. It features the ClickTight installation system for secure and easy installation, a 14-position quick-adjust harness, and multiple recline positions.

Image 2.1: The BRITAX Boulevard ClickTight US Car Seat in Trek color, showcasing its design and harness system.

പ്രധാന സവിശേഷതകൾ:

• ClickTight Installation: വാഹനത്തിന്റെ സീറ്റ് ബെൽറ്റ് ഉപയോഗിച്ച് കാർ സീറ്റ് ഇൻസ്റ്റാളേഷൻ ലളിതമാക്കുന്നു.
• Quick-Adjust Harness: 14-position harness with Click & Safe Snug Indicator for proper tightness.
• സേഫ്സെൽ ഇംപാക്ട് പ്രൊട്ടക്ഷൻ: Features a steel frame and impact-absorbing base for enhanced safety.
• പാർശ്വഫല സംരക്ഷണം: Two layers of side impact protection.
• 7-സ്ഥാനം ചാരിക്കിടക്കുക: Adjustable recline for child comfort and proper installation angle.
• നീക്കംചെയ്യാവുന്ന കവർ: എളുപ്പമുള്ള വൃത്തിയാക്കലിനായി.

3 സ്പെസിഫിക്കേഷനുകൾ

Image 3.1: Illustration of the car seat's weight and height limits for rear-facing (5-40 lbs) and forward-facing (20-65 lbs) modes.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1 അൺപാക്കിംഗ്

Carefully remove the car seat from its packaging. Inspect all components for any damage. Do not use the car seat if any part is damaged or missing. Retain all packaging materials until you are satisfied with the product.

4.2 ClickTight Installation (Vehicle Seat Belt)

The ClickTight system makes installation straightforward. Follow these steps for a secure installation:

1. Open the ClickTight Panel: Locate the ClickTight dial on the front of the car seat. Push the dial and turn it to lift the seat portion, revealing the belt path.
2. സീറ്റ് ബെൽറ്റ് റൂട്ട് ചെയ്യുക: വാഹനത്തിന്റെ ലാപ്പും ഷോൾഡർ ബെൽറ്റും നിർദ്ദിഷ്ട ബെൽറ്റ് പാതയിലൂടെ ഘടിപ്പിക്കുക. ബെൽറ്റ് വളച്ചൊടിച്ചിട്ടില്ലെന്ന് ഉറപ്പാക്കുക.
3. സീറ്റ് ബെൽറ്റ് ഉറപ്പിക്കുക: Buckle the vehicle's seat belt. Pull the shoulder belt to remove any slack from the lap portion.
4. Close the ClickTight Panel: Push the seat portion down firmly until it clicks into place. This action automatically tensions the seat belt for a secure installation.

Image 4.1: Visual guide to the three steps of ClickTight installation: Push Dial, Turn & Lift; Thread & Buckle; Click It Closed.

ചിത്രം 4.2: ഒരു ക്ലോസപ്പ് view of the ClickTight mechanism opening, showing the red lever used to release the seat base for belt routing.

4.3 Recline Position Adjustment

The car seat offers 7 recline positions to ensure proper angle for your child and vehicle fit. Adjust the recline before installation. Refer to the easy-read level indicators on the side of the car seat to confirm the correct recline angle for rear-facing or forward-facing use.

ചിത്രം 4.3: വശം view of the car seat highlighting the 7-position recline mechanism and the easy-read level indicators for correct angle.

Image 4.4: A close-up of the easy-read recline indicators, showing distinct color-coded zones for rear-facing and forward-facing installation.

4.4 Harness Height Adjustment

The 14-position quick-adjust harness allows you to change the harness height without rethreading. Simply squeeze the handle at the top of the headrest and slide it up or down to position the shoulder straps at the correct height for your child.

• പിൻവശം: Shoulder straps must be at or below your child's shoulders.
• ഫോർവേഡ്-ഫേസിംഗ്: Shoulder straps must be at or above your child's shoulders.

Image 4.5: The car seat's headrest and harness system, illustrating the 14 adjustable positions for optimal fit as the child grows.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

5.1 നിങ്ങളുടെ കുട്ടിയെ സുരക്ഷിതമാക്കൽ

1. Place your child in the car seat with their back flat against the seat back.
2. നിങ്ങളുടെ കുട്ടിയുടെ തോളിലും കാലുകൾക്കിടയിലും ഹാർനെസ് സ്ട്രാപ്പുകൾ കൊണ്ടുവരിക.
3. Insert the two buckle tongues into the buckle until they click.
4. ചെസ്റ്റ് ക്ലിപ്പ് കക്ഷത്തിന്റെ തലത്തിലേക്ക് സ്ലൈഡ് ചെയ്യുക.
5. Pull the harness adjustment strap until the harness is snug. The Click & Safe Snug Indicator will make an audible click when the harness is within the range of proper tightness.

ചിത്രം 5.1: ഒരു ക്ലോസപ്പ് view of the car seat's 5-point harness buckle and chest clip, demonstrating how to secure the child.

5.2 റിലീസുകൾasing Your Child

1. Press the red button on the harness buckle to release the buckle tongues.
2. Unclip the chest clip.
3. Loosen the harness straps by pressing the harness release button (usually located near the harness adjustment strap) and pulling the shoulder straps forward.
4. Remove your child from the car seat.

6. പരിപാലനം

6.1 ക്ലീനിംഗ് നിർദ്ദേശങ്ങൾ

• തുണികൊണ്ടുള്ള കവർ: The car seat features a removable cover. Refer to the care label on the fabric for specific washing instructions. Typically, machine wash with cold water on a delicate cycle and air dry. Do not bleach or iron.
• ഹാർനെസ് സ്ട്രാപ്പുകൾ: പരസ്യം ഉപയോഗിച്ച് ഹാർനെസ് സ്ട്രാപ്പുകൾ തുടയ്ക്കുകamp cloth. Do not machine wash, bleach, or immerse harness straps in water, as this may weaken them.
• ബക്കിൾ: Clean the buckle by rinsing it with warm water. Do not use soaps or detergents.
• Shell and Base: Wipe the car seat shell and base with a damp തുണിയും വീര്യം കുറഞ്ഞ സോപ്പും.

6.2 സംഭരണം

When not in use, store the car seat in a cool, dry place away from direct sunlight. Ensure all components are clean and dry before storage.

7. പ്രശ്‌നപരിഹാരം

• Difficulty with ClickTight Installation: Ensure the vehicle seat belt is fully extended and not twisted. Apply firm downward pressure on the car seat before closing the ClickTight panel. If the panel does not close easily, re-open it, re-route the belt, and try again.
• Harness Not Tightening: Check that the harness straps are not twisted or caught under the child. Ensure the harness release button is not pressed while attempting to tighten. Pull the harness adjustment strap straight out, not upwards or downwards.
• ഹാർനെസ് വളരെ ഇറുകിയതോ/അയഞ്ഞതോ: Adjust the harness height to ensure the shoulder straps are at the correct level for your child's shoulders (at or below for rear-facing, at or above for forward-facing). Use the Click & Safe Snug Indicator to achieve proper tightness.
• Car Seat Wiggles After Installation: After closing the ClickTight panel, test for movement at the belt path. The car seat should not move more than one inch side-to-side or front-to-back. If it does, re-install the car seat following the ClickTight instructions carefully.

8. വാറൻ്റിയും പിന്തുണയും

Britax car seats are manufactured with high-quality materials and undergo rigorous testing. For specific warranty details, please refer to the warranty card included with your product or visit the official Britax website. If you encounter any issues or have questions regarding your BRITAX Boulevard ClickTight US Car Seat, please contact Britax customer support for assistance.

For further information or to register your product, visit the Britax Store.