Circutor RVE-WB Box Parking 2 Socket User Manual

ആമുഖം

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of the Circutor RVE-WB Box Parking 2 Socket. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent potential hazards.

ഉൽപ്പന്നം കഴിഞ്ഞുview

ചിത്രം 1: ഫ്രണ്ട് view of the Circutor RVE-WB Box Parking 2 Socket. The device features a digital display, two circular control buttons, an RFID card reader symbol, indicator lights, and a covered charging socket at the bottom.

The Circutor RVE-WB is a robust parking box designed for electric vehicle charging. It features a user interface with a display, control buttons, and an integrated RFID reader for user authentication. The device provides a secure and reliable charging point for various applications.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the RVE-WB unit should only be performed by qualified personnel in accordance with local electrical codes and regulations. Ensure the main power supply is disconnected before commencing any installation work.

1. മൗണ്ടിംഗ്: Select a suitable wall or pole for mounting, ensuring it can support the weight of the unit and is protected from direct impact. Use appropriate fasteners for secure installation.
2. പവർ കണക്ഷൻ: Connect the main power supply cable to the designated terminals inside the unit. Ensure correct phase, neutral, and ground connections. Verify all connections are tight and secure.
3. Network Connection (if applicable): If the RVE-WBM-SMART model is used, connect the Ethernet cable or configure the Wi-Fi connection as per the specific network setup instructions provided in the supplementary smart module guide.
4. പ്രാരംഭ പവർ-അപ്പ്: After all connections are verified, restore power to the unit. The display should illuminate, indicating successful power-up.
5. കോൺഫിഗറേഷൻ: Follow the on-screen prompts or refer to the advanced configuration manual for initial setup, including date, time, and network parameters.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The RVE-WB is designed for straightforward operation. Follow these steps to initiate a charging session:

1. വാഹനം ബന്ധിപ്പിക്കുക: Open the socket cover and securely plug the charging cable from your electric vehicle into the RVE-WB socket.
2. Authenticate (if required): If the unit requires authentication (e.g., RVE-WBM-SMART models), present your authorized RFID card to the card reader area indicated by the card symbol on the device. The display will show a confirmation message upon successful authentication.
3. ചാർജിംഗ് ആരംഭിക്കുക: Once authenticated, the charging process will begin automatically, or you may need to press a button on the unit or your vehicle to start. The display will show charging status, and indicator lights will confirm active charging.
4. മോണിറ്റർ ചാർജിംഗ്: The display provides real-time information such as charging duration, energy delivered, and current status.
5. ചാർജിംഗ് അവസാനിപ്പിക്കുക: To stop charging, either press the stop button on the unit (if available), use your RFID card again, or stop the session from your vehicle. Disconnect the charging cable from the vehicle first, then from the RVE-WB unit. Close the socket cover to protect it from elements.

ഇൻഡിക്കേറ്റർ ലൈറ്റുകൾ

• ഗ്രീൻ ലൈറ്റ്: Ready for charging / Charging complete.
• നീല വെളിച്ചം: ചാർജിംഗ് പുരോഗമിക്കുന്നു.
• ചുവന്ന വെളിച്ചം: Error or fault condition. Refer to the Troubleshooting section.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and safe operation of your RVE-WB unit.

• വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ യൂണിറ്റിന്റെ പുറംഭാഗം മൃദുവായ, ഡി-ക്ലാസ്സർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp cloth. Do not use abrasive cleaners or solvents. Ensure the socket cover is free from dirt and debris.
• പരിശോധന: Regularly inspect the charging cable and the unit's exterior for any signs of damage, wear, or loose connections. If any damage is observed, discontinue use and contact qualified service personnel.
• Socket Cover: Always ensure the socket cover is properly closed when the unit is not in use to protect against dust, moisture, and foreign objects.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: For RVE-WBM-SMART models, periodically check for and apply firmware updates as recommended by Circutor to ensure optimal performance and security.

ട്രബിൾഷൂട്ടിംഗ്

If you encounter issues with your RVE-WB unit, refer to the following common problems and solutions:

For issues not listed above, or if solutions do not resolve the problem, please contact Circutor technical support or a certified electrician.

സ്പെസിഫിക്കേഷനുകൾ

Key technical specifications for the Circutor RVE-WB unit:

• നിർമ്മാതാവ്: സർക്യൂട്ട്
• ഭാഗം നമ്പർ: RVE-WB
• ഇനം മോഡൽ നമ്പർ: RVE-WB
• ഇനത്തിൻ്റെ പാക്കേജ് അളവ്: 1
• ASIN: B01N6DVMJG
• ആദ്യം ലഭ്യമായ തീയതി: 16 മെയ് 2017
• ഉൽപ്പന്ന തരം: Box Parking 2 Socket (Charging Station)
• കണക്റ്റിവിറ്റി: Smart models (RVE-WBM-SMART) may include Ethernet/Wi-Fi for remote management.
• പ്രാമാണീകരണം: RFID (for RVE-WBM-SMART models).
• Note: Detailed electrical specifications (voltage, current, power output) should be confirmed from the product label or a dedicated technical datasheet.

പിന്തുണയും വാറൻ്റിയും

For technical support, service, or warranty information, please contact Circutor directly through their official website or authorized distributors. Keep your purchase receipt and product serial number handy when contacting support.

Warranty details are typically provided with the product packaging or available on the manufacturer's official webസൈറ്റ്.