മോയിൻ 82663

Moen 82663 3 ഹാൻഡിൽ ടബ്/ഷവർ ഫ്യൂസറ്റ് യൂസർ മാനുവൽ

മോഡൽ: 82663

ആമുഖം

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Moen 82663 3 Handle Tub/Shower Faucet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of your product.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The Moen 82663 is a 3-handle tub/shower faucet designed for wall-mount installation, featuring a durable chrome finish. It includes separate handles for hot water, cold water, and a diverter for switching between the tub spout and showerhead.

Moen 82663 3 Handle Tub/Shower Faucet components

ചിത്രം 1: Complete Moen 82663 Tub/Shower Faucet assembly, showing the showerhead, three control handles, and tub spout.

വിശദമായി view of Moen 82663 faucet handles and showerhead

ചിത്രം 2: ക്ലോസ് അപ്പ് view of the faucet's three handles and the showerhead, highlighting the chrome finish.

Moen 82663 faucet installed in a bathroom

ചിത്രം 3: The Moen 82663 faucet system installed in a typical bathroom setting, demonstrating its appearance.

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The Moen 82663 faucet is designed for wall-mount installation. Professional installation is recommended to ensure proper function and to comply with local plumbing codes.

ആവശ്യമായ ഉപകരണങ്ങളും മെറ്റീരിയലുകളും:

  • ക്രമീകരിക്കാവുന്ന റെഞ്ച്
  • Pipe sealant tape
  • സ്ക്രൂഡ്രൈവർ (ഫിലിപ്സും ഫ്ലാറ്റ്ഹെഡും)
  • അളക്കുന്ന ടേപ്പ്
  • സുരക്ഷാ ഗ്ലാസുകൾ

ഇൻസ്റ്റലേഷൻ ഘട്ടങ്ങൾ:

  1. ഇൻസ്റ്റലേഷൻ ഏരിയ തയ്യാറാക്കുക: Ensure water supply is turned off at the main shut-off valve. Clear the area around the tub/shower wall where the faucet will be installed.
  2. Mount the Valve Body: Secure the faucet's valve body within the wall according to standard plumbing practices, ensuring it is level and properly aligned with the finished wall surface.
  3. വാട്ടർ ലൈനുകൾ ബന്ധിപ്പിക്കുക: Connect the hot and cold water supply lines to the corresponding inlets on the valve body. Use pipe sealant tape on all threaded connections to prevent leaks.
  4. Install Tub Spout and Showerhead: Attach the tub spout and showerhead arm to their respective outlets. Ensure the tub spout is securely fastened and the showerhead is angled correctly.
  5. Install Trim and Handles: Once the rough-in is complete and the wall is finished, install the decorative escutcheons and the three control handles (hot, cold, and diverter).
  6. ചോർച്ചയ്ക്കുള്ള പരിശോധന: പ്രധാന ജലവിതരണം സാവധാനം ഓണാക്കി എല്ലാ കണക്ഷനുകളിലും ചോർച്ചയുണ്ടോയെന്ന് പരിശോധിക്കുക. ശരിയായ ജലപ്രവാഹവും താപനില നിയന്ത്രണവും ഉറപ്പാക്കാൻ ടാപ്പ് പ്രവർത്തിപ്പിക്കുക.

Refer to the detailed plumbing diagrams provided with your product packaging for specific measurements and connection points.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The Moen 82663 features a traditional three-handle design for precise control over water temperature and flow.

നിയന്ത്രണങ്ങൾ:

  • ഇടത് ഹാൻഡിൽ: Controls hot water flow. Turn counter-clockwise to increase hot water.
  • വലത് ഹാൻഡിൽ: Controls cold water flow. Turn counter-clockwise to increase cold water.
  • Center Handle (Diverter): Directs water flow. Pull up or turn to divert water from the tub spout to the showerhead. Push down or turn back to direct water to the tub spout.

ഫ്യൂസറ്റ് ഉപയോഗിച്ച്:

  1. To Fill Tub: Ensure the center diverter handle is in the down position. Turn the left (hot) and right (cold) handles to achieve desired water temperature and flow.
  2. To Use Shower: Once water is flowing from the tub spout, pull up or turn the center diverter handle to redirect water to the showerhead. Adjust hot and cold handles for desired temperature.
  3. ഓഫാക്കാൻ: Turn both the left (hot) and right (cold) handles clockwise until water flow stops completely.
Showerhead in operation, spraying water

ചിത്രം 4: The showerhead actively spraying water, demonstrating its function.

Hand operating the Moen 82663 faucet handle

ചിത്രം 5: A hand demonstrating the operation of one of the faucet's control handles.

പരിപാലനവും പരിചരണവും

Regular cleaning and proper care will help maintain the chrome finish and ensure the longevity of your Moen faucet.

ഫിനിഷ് വൃത്തിയാക്കൽ:

  • ഒരു സോഫ്റ്റ് ഉപയോഗിക്കുക, ഡിamp cloth and mild soap to clean the chrome finish.
  • അബ്രാസീവ് ക്ലീനറുകൾ, കഠിനമായ രാസവസ്തുക്കൾ, അല്ലെങ്കിൽ സ്‌കോറിംഗ് പാഡുകൾ എന്നിവ ഒഴിവാക്കുക, കാരണം ഇവ ഫിനിഷിന് കേടുവരുത്തും.
  • വെള്ളം കെട്ടിനിൽക്കുന്നത് തടയാൻ ശുദ്ധജലം ഉപയോഗിച്ച് നന്നായി കഴുകുക, മൃദുവായ തുണി ഉപയോഗിച്ച് ഉണക്കുക.

ഷവർഹെഡ് അറ്റകുറ്റപ്പണികൾ:

  • Periodically check the showerhead nozzles for mineral buildup. Many Moen showerheads feature rubber nozzles that can be easily cleaned by rubbing them with your finger.
  • For stubborn mineral deposits, remove the showerhead and soak it in a solution of equal parts white vinegar and water.

Handle and Valve Maintenance:

  • If handles become stiff or difficult to turn, the internal cartridges may need lubrication or replacement. Consult a qualified plumber or Moen customer support.

Always ensure the water supply is turned off before performing any maintenance that requires disassembling parts of the faucet.

ട്രബിൾഷൂട്ടിംഗ്

This section addresses common issues you might encounter with your Moen 82663 faucet. For problems not listed here, contact Moen customer support.

പ്രശ്നംസാധ്യമായ കാരണംപരിഹാരം
താഴ്ന്ന ജലപ്രവാഹംClogged showerhead nozzles or aerator; partially closed shut-off valves.Clean showerhead nozzles. Ensure all shut-off valves are fully open.
ചോർന്നൊലിക്കുന്ന പൈപ്പ്Worn-out O-rings or cartridges.Replace O-rings or cartridges. Consult a plumber if unsure.
വെള്ളം തിരിച്ചുവിടാനുള്ള ബുദ്ധിമുട്ട്Diverter mechanism is stiff or faulty.Apply a silicone-based lubricant to the diverter stem. If issue persists, the diverter cartridge may need replacement.
ജല താപനില പ്രശ്നങ്ങൾImproper hot/cold water supply, or issues with internal mixing valve (if applicable).Check hot and cold water supply lines. Ensure no blockages.

സ്പെസിഫിക്കേഷനുകൾ

ഫീച്ചർവിശദാംശങ്ങൾ
ബ്രാൻഡ്മോയിൻ
മോഡൽ നമ്പർ82663
ഫിനിഷ് തരംChrome പൂർത്തിയാക്കുക
ഹാൻഡിലുകളുടെ എണ്ണം3
മെറ്റീരിയൽബ്രാസ്, ക്രോം
മൗണ്ടിംഗ് തരംമതിൽ മൗണ്ട്
Showerhead Size4 ഇഞ്ച്
Tub Spout Length5-1/2 ഇഞ്ച്
ഇനത്തിൻ്റെ ഭാരം2.2 കിലോഗ്രാം
പാക്കേജ് അളവുകൾ10.12 x 8.11 x 5.2 ഇഞ്ച്
യു.പി.സി026508271742

വാറൻ്റിയും പിന്തുണയും

Moen products are manufactured under the highest standards of quality and workmanship. This product comes with a comprehensive warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Moen webസൈറ്റ്.

For technical assistance, replacement parts, or further inquiries, please contact Moen Customer Support:

  • Webസൈറ്റ്: www.moen.com
  • ഫോൺ: Refer to Moen's official webപ്രാദേശിക കോൺടാക്റ്റ് നമ്പറുകൾക്കായുള്ള സൈറ്റ്.

പിന്തുണയുമായി ബന്ധപ്പെടുമ്പോൾ, ദയവായി നിങ്ങളുടെ ഉൽപ്പന്ന മോഡൽ നമ്പറും (82663) വാങ്ങൽ തീയതിയും ലഭ്യമാക്കുക.

അനുബന്ധ രേഖകൾ - 82663

പ്രീview MOEN Single-Handle Kitchen Faucet Illustrated Parts List (Models 8720, 8722)
Detailed illustrated parts list for MOEN Single-Handle Kitchen Faucets, models 8720 and 8722. Includes part numbers, descriptions, and ordering information for faucet components, spout assemblies, and spray kits.
പ്രീview മോയിൻ ടു-ഹാൻഡിൽ ബാത്ത്റൂം സിങ്ക് ഫ്യൂസറ്റ് ഇൻസ്റ്റാളേഷനും വാറന്റി ഗൈഡും
4 ഇഞ്ച് സെന്റർ ഇൻസ്റ്റാളേഷനുകൾക്കായി രൂപകൽപ്പന ചെയ്‌തിരിക്കുന്ന മോയിൻ ടു-ഹാൻഡിൽ ബാത്ത്‌റൂം സിങ്ക് ഫ്യൂസറ്റുകൾ ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനും പരിപാലിക്കുന്നതിനുമുള്ള സമഗ്ര ഗൈഡ്. പാർട്‌സ് ഐഡന്റിഫിക്കേഷൻ, ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ, ലീഡിനെക്കുറിച്ചുള്ള ഉപഭോക്തൃ വിവരങ്ങൾ, ആജീവനാന്ത പരിമിത വാറന്റി വിശദാംശങ്ങൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview മോയിൻ സ്ലീക്ക്™ സിംഗിൾ-ഹാൻഡിൽ ഹൈ ആർക്ക് പുൾഡൗൺ കിച്ചൺ ഫ്യൂസറ്റ് ഇല്ലസ്ട്രേറ്റഡ് പാർട്സ്
7864, 7864SRS, 7864BL, 7864BLS എന്നീ മോഡലുകളുടെ പാർട്ട് നമ്പറുകളും ഫിനിഷുകളും ഉൾക്കൊള്ളുന്ന ഔദ്യോഗിക Moen SLEEK™ കിച്ചൺ ഫ്യൂസറ്റ് റീപ്ലേസ്‌മെന്റ് പാർട്‌സ് ലിസ്റ്റ്. സ്‌പൗട്ട് കിറ്റുകൾ, ഹാൻഡിൽ കിറ്റുകൾ, കാട്രിഡ്ജുകൾ, ഹോസുകൾ, ഓപ്ഷണൽ ആക്‌സസറികൾ എന്നിവ ഉൾപ്പെടുന്നു.
പ്രീview Moen WS84004 സീരീസ് ടു ഹാൻഡിൽ ലാവറ്ററി ഫ്യൂസറ്റ് ഇൻസ്റ്റലേഷൻ ഗൈഡ്
Moen WS84004 സീരീസ് ടു-ഹാൻഡിൽ ലാവറ്ററി ഫ്യൂസറ്റ് ഇൻസ്റ്റാൾ ചെയ്യുന്നതിനുള്ള വിശദമായ, ഘട്ടം ഘട്ടമായുള്ള നിർദ്ദേശങ്ങൾ ഈ ഗൈഡ് നൽകുന്നു. ഇതിൽ ഭാഗങ്ങളുടെ ലിസ്റ്റുകൾ, ടെക്സ്റ്റിൽ വിശദീകരിച്ചിരിക്കുന്ന ഡയഗ്രമുകൾ, ക്ലീനിംഗ് ഉപദേശം, വാറന്റി വിവരങ്ങൾ എന്നിവ ഇംഗ്ലീഷ് പ്രാഥമിക ഭാഷയായി ഇംഗ്ലീഷ്, സ്പാനിഷ്, ഫ്രഞ്ച് ഭാഷകളിൽ അവതരിപ്പിച്ചിരിക്കുന്നു.
പ്രീview Moen IVER™ 6805 സീരീസ് വൺ-ഹാൻഡിൽ ലാവറ്ററി ഫ്യൂസറ്റ് ഇല്ലസ്ട്രേറ്റഡ് പാർട്സ്
കിറ്റ് നമ്പറുകൾ, ഫിനിഷുകൾ, ഭാഗ വിവരണങ്ങൾ എന്നിവയുൾപ്പെടെ Moen IVER™ 6805 സീരീസ് വൺ-ഹാൻഡിൽ ലാവറ്ററി ഫ്യൂസറ്റിനായുള്ള വിശദമായ ചിത്രീകരിച്ച ഭാഗങ്ങളുടെ പട്ടിക. അനുബന്ധ ഭാഗ നമ്പറുകളും ഫിനിഷ് ഓപ്ഷനുകളും ഉള്ള A മുതൽ M വരെയുള്ള ഘടകങ്ങൾ ഇതിൽ ഉൾപ്പെടുന്നു.
പ്രീview Moen Caldwell™ Two Handle Faucet 84348 Series Illustrated Parts
Detailed illustrated parts list for the Moen Caldwell™ Two Handle Centerset Lavatory Faucet, 84348 Series. Find kit numbers and finishes for all components.