USARemote Car Key Fob Keyless Entry Remote with Ignition Key (OUC60270, OUC60221) Instruction Manual

1. ആമുഖം

This manual provides detailed instructions for the USARemote Car Key Fob Keyless Entry Remote with Ignition Key. This product is designed as a replacement for lost or damaged key fobs and includes a complete electronic assembly with a battery. It offers keyless entry functionality and an ignition key for starting your vehicle.

The remote is user-programmable for vehicles manufactured before 2010. For vehicles from 2010 and newer, programming must be performed by a qualified locksmith or dealership. The ignition key is user-programmable, provided you have at least one existing working key.

2 അനുയോജ്യത

This key fob and ignition key set is compatible with the following vehicle models and part numbers:

• Replacement for Part Numbers: OUC60270, OUC60221, 1585784, 15913427, 20869057, 22756462

അനുയോജ്യമായ വാഹന മോഡലുകൾ:

• കാഡിലാക്ക്:
  • 2007-2014 Escalade (includes ESV and EXT)
• ഷെവർലെ:
  • 2007-2014 സബർബൻ (1500 ഉം 2500 ഉം ഉൾപ്പെടുന്നു)
  • 2007-2014 താഹോ
  • 2009-2017 യാത്ര
• GMC:
  • 2007-2014 Yukon (includes 1500 and 2500)

3. എന്താണ് ഉൾപ്പെടുത്തിയിരിക്കുന്നത്

ഓരോ പാക്കേജിലും ഇവ അടങ്ങിയിരിക്കുന്നു:

• Complete key fob with electronics and a pre-installed battery.
• Uncut transponder chip ignition key.

4. സജ്ജീകരണവും പ്രോഗ്രാമിംഗും

4.1. Ignition Key Cutting

The included ignition key is uncut and must be professionally cut to match your vehicle's existing key. This service can typically be performed by a locksmith or a hardware store that offers key cutting services. Ensure the service provider can cut transponder keys.

4.2. Ignition Key Programming (User Programmable)

If you have at least one existing, working ignition key, you can program the new cut key yourself. Follow these steps:

1. Insert your existing, working key into the ignition and turn it to the 'ON' position (do not start the engine).
2. Wait for the security indicator light on the dashboard to turn off.
3. Within 20 seconds, remove the existing key.
4. Immediately insert the newly cut key into the ignition and turn it to the 'ON' position.
5. Wait for the security indicator light to turn off. The new key is now programmed.
6. Test the new key to ensure it starts the vehicle.

4.3. Remote Fob Programming

For vehicles manufactured before 2010: The remote fob is user-programmable. Detailed step-by-step instructions are typically provided with the product packaging. Please refer to those specific instructions for your vehicle model.

For vehicles manufactured in 2010 and newer: The remote fob വേണം be programmed by a professional locksmith or a dealership. These vehicles often require specialized diagnostic equipment for programming.

Note: If programming multiple remotes, all remotes (existing and new) must be programmed at the same time. Failure to do so may result in older remotes no longer functioning.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The key fob features standard buttons for vehicle control:

• ലോക്ക് ബട്ടൺ: വാഹനത്തിന്റെ എല്ലാ വാതിലുകളും പൂട്ടാൻ ഒരിക്കൽ അമർത്തുക.
• അൺലോക്ക് ബട്ടൺ: Press once to unlock the driver's door, press twice to unlock all doors.
• വിദൂര ആരംഭ ബട്ടൺ: Press and hold to remotely start the vehicle (if equipped). Refer to your vehicle's owner's manual for specific remote start procedures.
• Trunk/Liftgate Release Button: Press twice to open the trunk or liftgate (if equipped).
• പാനിക് ബട്ടൺ: Press and hold to activate the vehicle's alarm system. Press again to deactivate.

6. പരിപാലനം

6.1. ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

The key fob uses one CR2 battery. When the remote's range decreases or it stops responding, the battery may need replacement. To replace the battery:

1. Carefully open the key fob casing.
2. പഴയ CR2 ബാറ്ററി നീക്കം ചെയ്യുക.
3. ശരിയായ ധ്രുവീകരണം ഉറപ്പാക്കിക്കൊണ്ട് ഒരു പുതിയ CR2 ബാറ്ററി ചേർക്കുക.
4. Close the key fob casinഗ്രാം സുരക്ഷിതമായി.

Note: Refer to your vehicle's owner's manual or the specific instructions provided with the key fob for detailed battery replacement steps, as procedures may vary slightly.

7. പ്രശ്‌നപരിഹാരം

• പ്രോഗ്രാമിംഗിന് ശേഷം റിമോട്ട് പ്രവർത്തിക്കുന്നില്ല: Ensure all remotes were programmed simultaneously. If not, repeat the programming process for all remotes. For 2010+ vehicles, confirm professional programming was completed correctly.
• Ignition key not starting vehicle: Verify the key was cut correctly by a professional. Ensure the key programming steps (Section 4.2) were followed precisely. If issues persist, consult a locksmith.
• Remote start not functioning: For GM vehicles, the remote start feature may be limited to two uses before requiring a manual key start to reset the system. Perform a manual key start, then re-attempt remote start.
• കുറഞ്ഞ വിദൂര ശ്രേണി: Replace the key fob battery (see Section 6.1).
• Buttons are too sensitive: This is a characteristic of the design. Exercise care to avoid accidental button presses when carrying the fob.

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

This product is an aftermarket replacement part. For specific warranty information, please refer to the documentation provided with your purchase or contact USARemote customer service.

USARemote offers technical support to assist with any questions regarding installation, programming, or functionality. Please refer to the contact information provided with your product or visit the official USARemote webപിന്തുണാ ഉറവിടങ്ങൾക്കായുള്ള സൈറ്റ്.

നിയമപരമായ നിരാകരണം: This is a replacement aftermarket part.