ഉൽപ്പന്നം കഴിഞ്ഞുview
The Breitling Super Avenger II is a high-performance, robust chronograph wristwatch designed for professional use. It features a self-winding mechanical movement, ensuring precision and reliability. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your timepiece.
This image displays the Breitling Super Avenger II chronograph watch. It features a robust stainless steel case, a deep blue dial with three white sub-dials, and a matching blue rubber strap. The watch has luminous hands and hour markers, a date window at 3 o'clock, and a unidirectional rotating bezel with rider tabs. The crown and pushers are visible on the right side of the case.
സജ്ജമാക്കുക
സമയവും തീയതിയും ക്രമീകരിക്കുന്നു
- കിരീടം അഴിക്കുക: Gently unscrew the crown (located at 3 o'clock) counter-clockwise until it springs out to position 1.
- തീയതി നിശ്ചയിക്കുന്നു: Pull the crown out to position 2. Turn the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
- സമയം ക്രമീകരിക്കുക: Pull the crown out to position 3. The seconds hand will stop. Turn the crown to set the hour and minute hands. To ensure accurate time setting, align the minute hand precisely with a minute marker when the seconds hand reaches 12 o'clock.
- Screw Down the Crown: Once the time and date are set, push the crown back into position 1 and screw it down clockwise firmly against the case. This ensures water resistance.
വാച്ച് വിൻഡ് ചെയ്യുന്നു
As an automatic movement, the watch is wound by the motion of your wrist. If the watch has stopped or has not been worn for an extended period, it can be manually wound. In crown position 1 (screwed out), turn the crown clockwise approximately 40 times. This will provide sufficient power reserve to start the watch.
ക്രോണോഗ്രാഫ് പ്രവർത്തിപ്പിക്കുന്നു
The Super Avenger II features a chronograph function for measuring elapsed time.
- ആരംഭിക്കുക: Press the upper pusher (at 2 o'clock) to start the chronograph seconds hand.
- നിർത്തുക: Press the upper pusher again to stop the chronograph. The elapsed time can be read from the central chronograph seconds hand, the 30-minute counter (at 12 o'clock), and the 12-hour counter (at 6 o'clock).
- പുന et സജ്ജമാക്കുക: After stopping, press the lower pusher (at 4 o'clock) to reset all chronograph hands to zero. The chronograph must be stopped before it can be reset.
കുറിപ്പ്: Ensure the chronograph pushers are fully screwed down (if applicable to your model) when not in use to maintain water resistance.
മെയിൻ്റനൻസ്
വൃത്തിയാക്കൽ
നിങ്ങളുടെ വാച്ച് പതിവായി മൃദുവായ, ഡി-ക്ലോഷർ ഉപയോഗിച്ച് വൃത്തിയാക്കുക.amp cloth. For more thorough cleaning, especially after exposure to saltwater, rinse the watch under lukewarm tap water with the crown and pushers fully screwed down. Dry thoroughly with a soft cloth. Avoid using harsh chemicals or abrasive materials.
ജല പ്രതിരോധം
The Super Avenger II is designed with significant water resistance. However, it is crucial to ensure the crown and pushers are always fully screwed down before any contact with water. Do not operate the crown or pushers underwater. Water resistance is not a permanent characteristic and may require periodic checks by an authorized service center, especially after impacts or prolonged use.
സേവന ഇടവേളകൾ
For optimal performance and longevity, it is recommended to have your Breitling watch serviced by an authorized service center every 2-5 years. This service typically includes cleaning, lubrication, and adjustment of the movement, as well as replacement of seals to maintain water resistance.
ട്രബിൾഷൂട്ടിംഗ്
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Watch has stopped or runs intermittently. | ആവശ്യത്തിന് പവർ റിസർവ് ഇല്ല. | Manually wind the watch by turning the crown clockwise approximately 40 times in position 1. Wear the watch regularly to keep it wound. |
| സമയം കൃത്യമല്ല. | Magnetization, impact, or need for service. | Keep the watch away from strong magnetic fields. If inaccuracy persists, contact an authorized service center for demagnetization or service. |
| Date does not change or changes at incorrect time. | Incorrect date setting or movement issue. | Ensure the date is not set during the forbidden hours (9 PM - 3 AM). Reset the date. If the problem continues, seek professional service. |
സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ നമ്പർ: A1337111/C871-139S
- ബ്രാൻഡ്: ബ്രെറ്റ്ലിംഗ്
- പ്രസ്ഥാനം: Self-winding mechanical chronograph (COSC-certified chronometer)
- കേസ് മെറ്റീരിയൽ: സ്റ്റെയിൻലെസ്സ് സ്റ്റീൽ
- ഡയൽ വർണ്ണം: നീല
- സ്ട്രാപ്പ് മെറ്റീരിയൽ: Rubber (Blue)
- ക്ലാപ്പ് തരം: ബക്കിൾ
- പ്രവർത്തനങ്ങൾ: Chronograph, Date, Hours, Minutes, Small Seconds
- ASIN: B06Y1H1P9T
- ആദ്യം ലഭ്യമായത്: ഓഗസ്റ്റ് 14, 2014
വാറൻ്റിയും പിന്തുണയും
Your Breitling Super Avenger II is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty are provided with your purchase documentation. Please retain your proof of purchase for warranty claims.
For warranty service, repairs, or technical support, please contact an authorized Breitling service center or the retailer from whom you purchased the watch. Unauthorized repairs or modifications may void your warranty.
You can find a list of authorized service centers and contact information on the official Breitling webസൈറ്റ്: www.breitling.com
