Audibax Missouri 2000 A Dual VHF Wireless Microphone System

1. ആമുഖം

Thank you for choosing the Audibax Missouri 2000 A Dual VHF Wireless Microphone System. This professional wireless microphone system is designed to deliver clear, interference-free audio for various applications. This manual provides essential information for the safe and efficient use of your new system. Please read it thoroughly before operation and retain it for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

• ഊർജ്ജ സ്രോതസ്സ്: Ensure the receiver is connected to a 230V power supply. Use only the provided power adapter.
• ബാറ്ററി ഉപയോഗം: Microphones operate on AA batteries. Replace batteries when the low battery indicator appears to ensure optimal performance. Do not mix old and new batteries, or different types of batteries.
• പരിസ്ഥിതി: Avoid exposing the system to water, moisture, extreme temperatures, or direct sunlight. Operate in a well-ventilated area.
• കൈകാര്യം ചെയ്യൽ: Handle microphones and receiver with care. Avoid dropping or subjecting them to strong impacts.
• സേവനം: യൂണിറ്റ് സ്വയം തുറക്കാനോ നന്നാക്കാനോ ശ്രമിക്കരുത്. എല്ലാ സേവനങ്ങളും യോഗ്യതയുള്ള ഉദ്യോഗസ്ഥരെ ഏൽപ്പിക്കുക.

3. പാക്കേജ് ഉള്ളടക്കം

താഴെ പട്ടികപ്പെടുത്തിയിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടോയെന്ന് ദയവായി പരിശോധിക്കുക:

• 1x Audibax Missouri 2000 A Receiver Unit
• 2x Audibax Missouri 2000 A Handheld Wireless Microphones
• 1x Power Adapter for Receiver
• 1x ഉപയോക്തൃ മാനുവൽ
• (AA Batteries for microphones are not included and must be purchased separately)

Figure 3.1: Complete Audibax Missouri 2000 A system including receiver and two microphones.

4. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Audibax Missouri 2000 A is a dual VHF wireless microphone system designed for professional audio applications. It features two high-quality handheld wireless microphones and a receiver unit with independent volume controls and RF/AF indicators.

പ്രധാന സവിശേഷതകൾ:

• Dual VHF wireless system with 2 handheld microphones.
• Receiver with Diversity antennas for improved signal reception and up to 80 meters coverage.
• Clean sound with a signal-to-noise ratio of 105 dB, minimizing interference.
• Independent volume control for each microphone on the receiver.
• RF/AF indicators on the receiver display for monitoring signal status.
• Microphone power via AA batteries, offering extended autonomy.
• Dynamic cardioid microphone capsule for focused sound capture and attenuation of off-axis sounds.
• Output connectors: XLR balanced and auxiliary (MIX) output.

Figure 4.1: Front panel of the receiver unit.

Figure 4.2: Two handheld wireless microphones.

5. സജ്ജീകരണം

5.1 റിസീവർ സജ്ജീകരണം

1. പ്ലേസ്മെൻ്റ്: Position the receiver unit on a stable, flat surface, away from potential sources of interference (e.g., computers, Wi-Fi routers). Ensure adequate ventilation.
2. ആന്റിന കണക്ഷൻ: Screw the two included antennas firmly into the ANT A and ANT B connectors on the rear of the receiver. Adjust them vertically for optimal signal reception.
3. പവർ കണക്ഷൻ: Connect the provided power adapter to the DC IN port on the rear of the receiver and then plug it into a 230V AC power outlet.
4. ഓഡിയോ ഔട്ട്പുട്ട്:
   • For a mixed output of both microphones, connect an audio cable (e.g., 6.35mm jack) from the "OUT MIX" port on the receiver to the input of your mixer, amplifier, or sound system.
   • For individual balanced outputs, use XLR cables to connect the "BALANCED" XLR output ports (if available on your specific model) to your audio system.

Figure 5.1: Rear panel connections of the receiver unit.

5.2 മൈക്രോഫോൺ സജ്ജീകരണം

1. ബാറ്ററി ഇൻസ്റ്റാളേഷൻ: Unscrew the bottom part of each microphone to access the battery compartment. Insert two AA batteries, ensuring correct polarity (+/-). Screw the bottom part back on securely.
2. പവർ ഓൺ: Slide the ON/OFF switch on each microphone to the "ON" position. The microphone display should illuminate, showing the channel and frequency.
3. നിശബ്‌ദ പ്രവർത്തനം: Each microphone has a MUTE switch. Use this to temporarily silence the microphone without turning it off completely.

6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

6.1 സിസ്റ്റം പവർ ചെയ്യുന്നു

1. Ensure all connections (power, audio output) are secure on the receiver.
2. Turn on your mixer or amplifier first, with its volume set to minimum.
3. Press the power button on the receiver unit. The display will light up.
4. Turn on each microphone by sliding its ON/OFF switch to "ON".
5. Observe the receiver's display. The "RF" (Radio Frequency) indicator for each channel should light up, indicating a successful connection between the microphone and receiver. The "AF" (Audio Frequency) indicator will light up when sound is detected by the microphone.

Figure 6.1: Receiver display with RF/AF indicators and frequency information.

6.2 വോളിയം നിയന്ത്രണം

• The receiver has independent volume knobs for Microphone A (VOLUME A) and Microphone B (VOLUME B). Adjust these to set the desired output level for each microphone.
• Gradually increase the volume on your mixer or ampആവശ്യമുള്ള ശ്രവണ നിലയിലേക്ക് ലിഫയർ.

6.3 Frequency Information

The Audibax Missouri 2000 A operates on fixed VHF frequencies. For this specific model, the frequencies are 179.300 MHz and 188.100 MHz. These frequencies are displayed on both the receiver and microphone units.

7. പരിപാലനം

7.1 വൃത്തിയാക്കൽ

• Always disconnect the receiver from the power outlet before cleaning.
• Use a soft, dry cloth to wipe the surfaces of the receiver and microphones.
• Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.

7.2 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ

• When the microphone's display indicates low battery, replace both AA batteries immediately to avoid interruption during use.
• പുതിയ ബാറ്ററികൾ ഇടുമ്പോൾ ശരിയായ ധ്രുവീകരണം ഉറപ്പാക്കുക.
• ഉപയോഗിച്ച ബാറ്ററികൾ പ്രാദേശിക നിയന്ത്രണങ്ങൾ അനുസരിച്ച് ഉത്തരവാദിത്തത്തോടെ നീക്കം ചെയ്യുക.

7.3 സംഭരണം

• When not in use for extended periods, remove batteries from the microphones to prevent leakage.
• നേരിട്ടുള്ള സൂര്യപ്രകാശത്തിൽ നിന്നും തീവ്രമായ താപനിലയിൽ നിന്നും അകറ്റി, തണുത്തതും വരണ്ടതുമായ സ്ഥലത്ത് സിസ്റ്റം സൂക്ഷിക്കുക.

8. പ്രശ്‌നപരിഹാരം

9 സ്പെസിഫിക്കേഷനുകൾ

10. വാറൻ്റിയും പിന്തുണയും

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Audibax customer service directly. Keep your proof of purchase for any warranty claims.