ആമുഖം
Welcome to the user manual for your new ThruNite TC12 V2 EDC Flashlight. This powerful and versatile LED flashlight is designed for everyday carry, offering exceptional brightness, reliable performance, and convenient USB-C recharging. Please read this manual carefully to ensure proper use, maintenance, and to maximize the lifespan of your device.
Image: The ThruNite TC12 V2 flashlight shown alongside its rechargeable 18650 battery.
പാക്കേജ് ഉള്ളടക്കം
Upon opening your ThruNite TC12 V2 package, you should find the following items:
- 1 x ThruNite TC12 V2 Cool White Flashlight
- 1 x ThruNite 18650 Rechargeable Battery (3400mAh)
- 1 x യുഎസ്ബി-സി ചാർജിംഗ് കേബിൾ
- 1 x ലാനിയാർഡ്
- 1 x ഹോൾസ്റ്റർ
- 1 x Pocket Clip (pre-installed or separate)
- സ്പെയർ ഒ-റിംഗുകൾ
- Spare USB Port Cover
Image: All items included in the ThruNite TC12 V2 flashlight package, laid out for inspection.
സജ്ജമാക്കുക
ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
- ഫ്ലാഷ്ലൈറ്റിന്റെ ടെയിൽ ക്യാപ്പ് എതിർ ഘടികാരദിശയിൽ തിരിച്ച് അഴിക്കുക.
- Insert the included ThruNite 18650 battery with the positive (+) end facing towards the head of the flashlight (towards the LED).
- Screw the tail cap back on clockwise until it is securely tightened. Ensure the tail cap is fully tightened for proper electrical contact and water resistance.
ചാർജിംഗ്
The TC12 V2 features a built-in USB-C charging port for convenient recharging of the included 18650 battery.
- Locate the USB-C charging port on the side of the flashlight, usually covered by a rubber flap.
- Gently lift the rubber flap to expose the port.
- Connect the included USB-C cable to the flashlight's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
- The indicator light on the side switch will show the charging status:
- നീല: Charging complete.
- ചുവപ്പ്: ചാർജിംഗ് പുരോഗമിക്കുന്നു.
- Once charging is complete, disconnect the USB-C cable and firmly press the rubber flap back into place to ensure water resistance.
ചിത്രം: ക്ലോസ്-അപ്പ് view of the ThruNite TC12 V2 flashlight, highlighting the USB-C charging port located on the side.
ഓപ്പറേഷൻ
The TC12 V2 features both a tail switch and a side switch for versatile operation.
Tail Switch Operations
- മൊമെന്ററി ഓൺ: താൽക്കാലിക പ്രകാശത്തിനായി ടെയിൽ സ്വിച്ച് ലഘുവായി അമർത്തുക. ഓഫാക്കാൻ വിടുക.
- സ്ഥിരമായ ഓൺ/ഓഫ്: Fully press the tail switch until it clicks to turn the flashlight on or off.
- തൽക്ഷണ ടർബോ: From off, fully press and hold the tail switch to activate Turbo mode instantly. Release to turn off.
Image: The tail cap of the ThruNite TC12 V2 flashlight, where the primary power switch is located.
Side Switch Operations (when flashlight is ON via tail switch)
- മോഡുകൾ മാറ്റുക: From ON, press and hold the side switch to cycle through Firefly, Low, Medium, and High modes. Release the switch to select the desired mode. The flashlight has mode memory and will turn on in the last used general mode (excluding Turbo and Strobe).
- തൽക്ഷണ ടർബോ: Double-click the side switch quickly to activate Turbo mode. Double-click again to return to the previous mode.
- സ്ട്രോബ് മോഡ്: Triple-click the side switch quickly to activate Strobe mode. Double-click to return to the previous mode.
- Firefly Mode: From OFF, press and hold the side switch for 1 second to activate Firefly mode.
Image: The ThruNite TC12 V2 flashlight, highlighting the side switch with its integrated indicator light.
മെയിൻ്റനൻസ്
- വൃത്തിയാക്കൽ: Regularly clean the threads and O-rings with a clean cloth. Apply a thin layer of silicone grease to the O-rings periodically to maintain water resistance.
- ബാറ്ററി കെയർ: Store the battery in a cool, dry place when not in use. If the flashlight will not be used for an extended period, remove the battery to prevent parasitic drain and potential damage.
- USB പോർട്ട്: Ensure the rubber cover for the USB-C charging port is always securely closed when not charging to prevent dust and water ingress.
- ലെൻസ് ക്ലീനിംഗ്: Use a soft, lint-free cloth to clean the lens. Avoid abrasive materials that could scratch the surface.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your ThruNite TC12 V2, please refer to the table below for common problems and their solutions.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ടോർച്ച് ഓണാകുന്നില്ല. | Battery is dead or improperly installed. Tail cap is loose. | Charge the battery. Ensure battery is inserted with positive (+) end towards the head. Tighten the tail cap fully. |
| വെളിച്ചം മങ്ങുന്നു അല്ലെങ്കിൽ മിന്നിമറയുന്നു. | Low battery. Poor contact between battery and contacts. | Recharge the battery. Clean battery contacts and flashlight contacts. Ensure tail cap is tight. |
| ചാർജിംഗ് ഇൻഡിക്കേറ്റർ പ്രവർത്തിക്കുന്നില്ല. | USB cable or power source issue. Charging port cover not fully open. | Try a different USB cable or power source. Ensure the rubber cover is fully open and the cable is inserted correctly. |
| Flashlight gets hot quickly. | Operating in Turbo mode for extended periods. | This is normal for high-output flashlights. Reduce output to a lower mode if it becomes too hot to handle. The flashlight has thermal regulation to prevent overheating. |
സ്പെസിഫിക്കേഷനുകൾ
Detailed technical specifications for the ThruNite TC12 V2 CW Flashlight:
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ | TC12 V2 CW |
| ബ്രാൻഡ് | ത്രൂനൈറ്റ് |
| പ്രകാശ സ്രോതസ്സ് തരം | എൽഇഡി |
| Max Output Brightness | 1100 ല്യൂമെൻസ് |
| പരമാവധി ബീം ദൂരം | 240 മീറ്റർ |
| പവർ ഉറവിടം | Battery Powered (1x 18650 rechargeable battery included) |
| ചാർജിംഗ് | USB-C റീചാർജ് ചെയ്യാവുന്നത് |
| മെറ്റീരിയൽ | Aluminum (Type III hard-anodized finish) |
| ജല പ്രതിരോധ നില | IPX-8 (2 meters submersible) |
| ഇംപാക്ട് റെസിസ്റ്റൻസ് | 1 മീറ്റർ |
| ഉൽപ്പന്ന അളവുകൾ | 1"D x 1"W x 5.51"H (ഏകദേശം 25.4mm x 25.4mm x 140mm) |
| നിറം | Black (TC12 V2 CW) |
ചിത്രം: വിശദമായ ഒരു ചിത്രം view of the LED emitter and reflector assembly within the ThruNite TC12 V2 flashlight head.
വാറൻ്റിയും പിന്തുണയും
ThruNite products are manufactured to high quality standards. For specific warranty details and support inquiries, please refer to the warranty card included in your product packaging or visit the official ThruNite website. You may also contact ThruNite customer service directly for assistance with product operation, troubleshooting, or warranty claims.
For the most up-to-date information and contact methods, please visit: www.thrunite.com
