AquaForte Midi Power UVC 40 Watts Pond Sterilizer

ആമുഖം

The AquaForte Midi Power UVC is a powerful and universal UV sterilizer designed for garden ponds and aquariums. This system effectively prevents bacterial turbidity and green water by exposing passing water to UV-C radiation. The UV-C light, a cosmic radiation not naturally present on Earth, is highly effective against pathogens (bacteria, viruses, fungi), parasites, and filamentous algae spores, as organisms have not adapted to it. Integrating this UV-C system into your filtration setup improves water quality, enhancing the living conditions and health of aquatic animals.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your AquaForte Midi Power UVC 40 Watts unit.

പ്രധാനപ്പെട്ട സുരക്ഷാ വിവരങ്ങൾ

• എല്ലാ നിർദ്ദേശങ്ങളും വായിക്കുക: Before installation and operation, carefully read and understand all instructions in this manual.
• ഇലക്ട്രിക്കൽ സുരക്ഷ: Always disconnect the power supply before performing any maintenance or installation. Ensure the unit is connected to a properly grounded outlet. Do not operate if the power cord or plug is damaged.
• UV-C റേഡിയേഷൻ: ഒരിക്കലും UV-C l-ലേക്ക് നേരിട്ട് നോക്കരുത്amp when it is illuminated, as UV-C radiation is harmful to eyes and skin. The lamp is enclosed within a quartz glass tube for safety during operation.
• ജല സമ്മർദ്ദം: Do not exceed the maximum operating pressure of 2 bars.
• ഇൻസ്റ്റലേഷൻ: Install the unit according to the instructions to prevent water leakage and electrical hazards. Ensure all connections are secure.
• കുട്ടികളും വളർത്തുമൃഗങ്ങളും: Keep the unit and its components out of reach of children and pets.

പാക്കേജ് ഉള്ളടക്കം

ഇൻസ്റ്റാളേഷനുമായി മുന്നോട്ടുപോകുന്നതിനുമുമ്പ് എല്ലാ ഘടകങ്ങളും നിലവിലുണ്ടെന്നും കേടുപാടുകൾ സംഭവിച്ചിട്ടില്ലെന്നും ഉറപ്പാക്കുക.

ചിത്രം: കഴിഞ്ഞുview of the AquaForte Midi Power UVC 40 Watts unit, including the stainless steel housing, electronic ballast, UV lamp (inside the housing), and various connection adapters.

• 1 x AquaForte Midi Power UVC Unit (Stainless Steel Housing)
• 1 x T5 UV Lamp (pre-installed or separate, check packaging)
• 1 x Electronic Ballast
• 3 x 63 mm PVC Connectors (for gluing)
• 1 x Blind Cap (for unused port)
• 2 x Special Flexible Hose Adapters (32/38/40/50 mm)
• Mounting hardware (screws, seals, etc., typically included)

സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Proper installation is crucial for the efficient and safe operation of your UVC unit. This unit is designed for integration into your pond's filtration system.

1. ഒരു സ്ഥലം തിരഞ്ഞെടുക്കൽ

• Install the UVC unit after the pond pump and before the biological filter. This ensures that larger debris is filtered out before reaching the UVC, and beneficial bacteria in the biological filter are not exposed to UV-C radiation.
• Ensure the unit is installed in a dry, protected area, away from direct sunlight and freezing temperatures.
• Allow sufficient space around the unit for maintenance, especially for lamp മാറ്റിസ്ഥാപിക്കൽ.

2. Connecting the Water Flow

The unit features multiple connection options for various hose and pipe diameters.

ചിത്രം: Connection options for the AquaForte Midi Power UVC, illustrating the multi-step flexible hose adapters (32mm, 38mm, 40mm, 50mm) and the 63mm PVC connection point.

• For PVC Pipes (63 mm): Use the provided 63 mm PVC connectors. These can be glued directly to your existing PVC pipe system. Ensure a watertight seal using appropriate PVC adhesive.
• For Flexible Hoses (32/38/40/50 mm): Attach the special flexible hose adapters to the UVC unit's inlets/outlets. Cut the adapter to the desired diameter (32mm, 38mm, 40mm, or 50mm) to match your hose. Secure the hose with a hose clamp ചോർച്ച തടയാൻ.
• The unit has two inlet/outlet ports and one blind cap. Connect your water inlet to one port and the outlet to the other. Use the blind cap to seal any unused port securely.
• Ensure the water flow direction matches the arrows on the unit (if present) or that water enters one end and exits the other.
• The maximum flow rate for this unit is 15,000 liters per hour (15m³/h). Ensure your pump's flow rate does not exceed this.

3. വൈദ്യുതി ബന്ധം

• Connect the electronic ballast to the UVC unit.
• Ensure the ballast is placed in a dry, protected location.
• Plug the power cord into a grounded electrical outlet. Do not power on the unit until all water connections are secure and checked for leaks.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed, operating the AquaForte Midi Power UVC is straightforward.

• പ്രാരംഭ ആരംഭം: After ensuring all water connections are secure and there are no leaks, turn on your pond pump to allow water to flow through the UVC unit.
• പവർ ഓൺ: Plug the UVC unit's power cord into the electrical outlet. The UV lamp will illuminate, and the unit will begin sterilizing the water.
• തുടർച്ചയായ പ്രവർത്തനം: For optimal results, the UVC unit should operate continuously during the pond season (when water temperatures are above 10°C / 50°F).
• ഇൻഡിക്കേറ്റർ ലൈറ്റ്: Many electronic ballasts include an indicator light to show that the UV lamp is functioning. Refer to your ballast's specific instructions if available.

ചിത്രം: ഒരു ക്ലോസപ്പ് view of the AquaForte Midi Power UVC unit, highlighting its robust construction and purpose for maintaining clear pond water.

മെയിൻ്റനൻസ്

Regular maintenance ensures the longevity and effectiveness of your AquaForte Midi Power UVC unit.

1. യുവി എൽamp മാറ്റിസ്ഥാപിക്കൽ

• The effective lifespan of a UV-C lamp is approximately 8,000 to 9,000 operating hours (roughly one pond season). After this period, the UV-C output significantly diminishes, even if the lamp still glows.
• UV എൽ മാറ്റിസ്ഥാപിക്കുകamp annually, preferably at the start of each pond season, to maintain optimal performance.
• To Replace the Lamp:
  1. പവർ വിച്ഛേദിക്കുക: Always unplug the unit from the electrical outlet before attempting any maintenance.
  2. ജലപ്രവാഹം നിർത്തുക: Close any valves to stop water flow through the UVC unit.
  3. Drain Unit: Allow the unit to drain completely.
  4. ആക്‌സസ് എൽamp: Carefully open the housing according to the unit's design (usually by unscrewing an end cap).
  5. പഴയ എൽ നീക്കം ചെയ്യുകamp: Gently pull out the old UV lamp from its socket. Handle with care as it may be fragile.
  6. Clean Quartz Sleeve: While the unit is open, inspect and clean the quartz glass sleeve. Use a soft cloth and a mild cleaning solution (e.g., vinegar or a specialized quartz cleaner) to remove any mineral deposits or algae that may reduce UV-C penetration. Rinse thoroughly.
  7. പുതിയ എൽ ഇൻസ്റ്റാൾ ചെയ്യുകamp: Insert the new T5 UV lamp into the socket, ensuring it is seated correctly. Avoid touching the glass part of the new lamp with bare hands; use gloves or a clean cloth.
  8. വീണ്ടും കൂട്ടിച്ചേർക്കുക: Securely reassemble the housing, ensuring all seals are properly seated to prevent leaks.
  9. വൈദ്യുതിയും വെള്ളവും പുനഃസ്ഥാപിക്കുക: Reopen water valves, check for leaks, and then plug the unit back into the electrical outlet.

2. Cleaning the Quartz Sleeve

The quartz glass sleeve protects the UV lamp from water and allows UV-C light to pass through. Over time, mineral deposits and algae can accumulate on its surface, reducing the effectiveness of the UV-C radiation. Clean the quartz sleeve at least once a year, or more frequently if water conditions are poor, during lamp മാറ്റിസ്ഥാപിക്കൽ.

3. ശീതകാല സംഭരണം

• Before freezing temperatures arrive, disconnect the UVC unit from the power supply and water circulation.
• Drain all water from the unit to prevent freezing damage.
• Clean the unit thoroughly, including the quartz sleeve.
• Store the unit in a dry, frost-free location during winter.

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

വാറൻ്റിയും പിന്തുണയും

വാറൻ്റി വിവരങ്ങൾ

AquaForte products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official AquaForte webസൈറ്റ്. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് നിങ്ങളുടെ വാങ്ങലിന്റെ തെളിവ് സൂക്ഷിക്കുക.

Note: The UV lamp is a consumable item and typically not covered under the standard product warranty.

ഉപഭോക്തൃ പിന്തുണ

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact your AquaForte dealer or visit the official AquaForte webപിന്തുണാ കോൺടാക്റ്റ് വിശദാംശങ്ങൾക്കായി സൈറ്റ്.

Webസൈറ്റ്: www.aquaforte.com