TeckNet WA878 Wireless Doorbell Instruction Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The TeckNet WA878 Wireless Doorbell system provides a reliable and convenient solution for your home or office. It features a wireless push button (transmitter) and a plug-in receiver, offering a wide range of chimes and adjustable volume levels. Designed for ease of use and durability, this doorbell ensures you never miss a visitor.

Image 1.1: The TeckNet WA878 Wireless Doorbell system, showing the plug-in receiver and the compact push button transmitter.

Image 1.2: Key features of the TeckNet WA878 Wireless Doorbell, including 60 chimes, 5 volume levels (0-120dB), 3 working modes, and an LED indicator light.

2. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ ഉണ്ടോ എന്ന് പരിശോധിക്കുക:

• 1 x TeckNet WA878 Wireless Doorbell Receiver
• 1 x TeckNet WA878 Wireless Doorbell Transmitter (Push Button)
• Mounting Hardware (screws, anchors, adhesive tape)
• ഉപയോക്തൃ മാനുവൽ

3 സുരക്ഷാ വിവരങ്ങൾ

• Do not expose the receiver to water or excessive humidity. The transmitter is IP65 rated for outdoor use.
• ഉപകരണം സ്വയം ഡിസ്അസംബ്ലിംഗ് ചെയ്യാനോ നന്നാക്കാനോ ശ്രമിക്കരുത്. സഹായത്തിന് ഉപഭോക്തൃ പിന്തുണയുമായി ബന്ധപ്പെടുക.
• Keep the device away from direct heat sources and open flames.
• Ensure the receiver is plugged into a standard wall outlet with the correct voltage.

4. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

4.1. ട്രാൻസ്മിറ്റർ (പുഷ് ബട്ടൺ) ഇൻസ്റ്റാളേഷൻ

1. ഒരു ലൊക്കേഷൻ തിരഞ്ഞെടുക്കുക: Select a flat, vertical surface near your door, ensuring it is easily accessible to visitors.
2. മൗണ്ടിംഗ് ഓപ്ഷനുകൾ:
   • പശ ടേപ്പ്: Clean the mounting surface thoroughly. Peel off one side of the adhesive tape and attach it to the back of the transmitter. Peel off the other side and firmly press the transmitter onto the desired location for at least 30 seconds.
   • സ്ക്രൂകൾ: Open the back cover of the transmitter. Mark the positions for drilling using the screw holes. Drill two holes, insert the wall anchors (if necessary), and secure the transmitter back cover with the provided screws. Reattach the front cover.
3. ടെസ്റ്റ്: Press the push button to ensure it activates the receiver.

ചിത്രം 4.1: ഉദാample of the wireless doorbell transmitter being installed on an exterior wall.

4.2. റിസീവർ സജ്ജീകരണം

1. പ്ലഗ് ഇൻ: Insert the receiver into any standard indoor wall outlet.
2. പവർ ഓൺ: The receiver will power on automatically.

4.3. Pairing (If Needed)

The transmitter and receiver are typically pre-paired at the factory. If they do not connect, follow these steps to pair them:

1. റിസീവർ ഒരു ഔട്ട്ലെറ്റിൽ പ്ലഗ് ചെയ്യുക.
2. Press and hold the volume button on the receiver for approximately 5 seconds until you hear a short chime and the LED indicator flashes. This indicates pairing mode.
3. Immediately press the push button on the transmitter. The receiver will chime, confirming successful pairing.
4. If pairing fails, unplug the receiver and repeat the process.

5. ഓപ്പറേഷൻ

5.1. Changing Chimes

To select a different melody from the 60 available chimes, press the 'Melody' button on the side of the receiver. Each press will cycle through the available tunes. Stop pressing when you hear your desired chime.

5.2. വോളിയം ക്രമീകരിക്കുന്നു

The receiver offers 5 adjustable volume levels, ranging from 0dB to 120dB. Press the 'Volume' button on the side of the receiver to cycle through the volume settings. Select the level that best suits your environment.

5.3. Working Modes (LED Indicator & Mute Mode)

The doorbell receiver features different working modes:

• Sound Only Mode: The receiver will only play the selected chime.
• LED Flash Only Mode: The receiver's LED indicator will flash without playing a chime. This is useful for quiet environments or for individuals with hearing impairments.
• Sound & LED Flash Mode: The receiver will play the chime and the LED indicator will flash simultaneously.

To switch between modes, press the dedicated mode button on the receiver. The LED indicator will flash to confirm the selected mode.

Image 5.1: The LED indicator and Mute Mode feature, useful for quiet times or for the hearing impaired.

5.4. മെമ്മറി പ്രവർത്തനം

The TeckNet WA878 doorbell is equipped with a memory function. It will automatically save your last selected melody and volume level, even after a power outage. This ensures your preferred settings are retained without needing to reconfigure them.

Image 5.2: The memory function preserves the last set melody and volume level.

6. പരിപാലനം

To ensure the longevity and optimal performance of your TeckNet WA878 Wireless Doorbell, follow these maintenance guidelines:

• വൃത്തിയാക്കൽ: Wipe the surfaces of both the transmitter and receiver with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• ട്രാൻസ്മിറ്റർ ബാറ്ററി: The transmitter typically uses a long-life battery. If the doorbell stops working, consider replacing the transmitter battery. Refer to the specific battery type indicated on the transmitter.
• പരിസ്ഥിതി സംരക്ഷണം: The transmitter is IP65 waterproof, protecting it from dust and water splashes. However, avoid submerging it in water. The receiver is for indoor use only.

Image 6.1: The doorbell transmitter features an IP65 waterproof rating and is designed for a maximum lifespan of 4.5 years.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your TeckNet WA878 Wireless Doorbell, refer to the following common problems and solutions:

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the TeckNet WA878 Wireless Doorbell:

Image 8.1: The TeckNet WA878 boasts an impressive 1300ft (400M) wireless range, ensuring you never miss a visitor.

9. വാറൻ്റിയും പിന്തുണയും

TeckNet products are designed for reliability and performance. For information regarding warranty coverage, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official TeckNet website. You may also contact TeckNet customer service directly for assistance with any product-related inquiries.