AKO 15226 Electronic Controller DI IP2 User Manual

1. ആമുഖം

This manual provides essential information for the safe and efficient use of the AKO 15226 Electronic Controller DI IP2. Please read these instructions carefully before installation, operation, or maintenance to ensure proper functioning and to prevent damage to the device or injury to personnel. Keep this manual in an accessible location for future reference.

2 സുരക്ഷാ വിവരങ്ങൾ

ഇനിപ്പറയുന്ന സുരക്ഷാ മുൻകരുതലുകൾ എപ്പോഴും നിരീക്ഷിക്കുക:

• ഇലക്ട്രിക്കൽ സുരക്ഷ: Installation and maintenance must be performed by qualified personnel only. Disconnect power before performing any work on the device.
• വാല്യംtage: Ensure the power supply matches the device's specified voltage (AC 230V).
• പരിസ്ഥിതി: Do not expose the device to excessive moisture, dust, or extreme temperatures beyond its operating range. The device has an IP2 protection rating, indicating limited protection against solid objects and no protection against liquids.
• മൗണ്ടിംഗ്: Securely mount the device on a DIN rail as specified to prevent accidental dislodgement.
• ഉദ്ദേശിച്ച ഉപയോഗം: Use the controller only for its intended purpose as an electronic regulator for industrial applications.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

The AKO 15226 is a versatile electronic controller designed for precise regulation in various industrial and scientific applications. It features a clear 3.5-digit display and supports a wide range of universal sensors, including NTC, PTC, Pt100, and TC(J,K).

ചിത്രം 3.1: ഫ്രണ്ട് view of the AKO 15226 Electronic Controller. This image shows the compact design suitable for DIN rail mounting, with its digital display and control interface.

പ്രധാന സവിശേഷതകൾ:

• ഡിസ്പ്ലേ: 3.5-digit indicator for clear readings.
• മൗണ്ടിംഗ് തരം: Designed for DIN rail installation.
• അളവുകൾ: Installation dimensions of 90 x 70 x 58 mm.
• ഇൻസ്റ്റലേഷൻ ആഴം: 61.5 മി.മീ.
• സെൻസർ അനുയോജ്യത: Universal sensor input for NTC, PTC, Pt100, and TC(J,K)/mA.
• ഔട്ട്പുട്ട്: Two CO-8A (4) relay outputs.
• കൃത്യത: 1% accuracy.
• വൈദ്യുതി വിതരണം: എസി 230 വി.
• സംരക്ഷണ റേറ്റിംഗ്: IP2.

4. സജ്ജീകരണം

Follow these steps for proper installation of the AKO 15226 controller:

1. വൈദ്യുതി വിച്ഛേദിക്കൽ: Ensure all power to the installation area is disconnected before beginning.
2. മൗണ്ടിംഗ്: Mount the controller securely onto a standard DIN rail. Ensure it clicks into place firmly.
3. വയറിംഗ് പവർ: Connect the AC 230V power supply to the designated terminals on the controller. Refer to the wiring diagram provided with the device for correct polarity and terminal identification.
4. സെൻസർ കണക്ഷൻ: Connect your chosen NTC, PTC, Pt100, or TC(J,K)/mA sensor to the universal sensor input terminals. Observe correct wiring for the specific sensor type.
5. ഔട്ട്പുട്ട് കണക്ഷനുകൾ: Connect the devices or systems to be controlled to the two relay output terminals (CO-8A). Ensure proper load capacity and wiring.
6. സ്ഥിരീകരണം: Double-check all connections for security and correctness before restoring power.
7. പവർ ഓൺ: Restore power to the system. The controller display should illuminate.

5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once installed and powered, the AKO 15226 controller is ready for operation. The 3.5-digit display shows the current measured value from the connected sensor. Specific operating modes and parameter settings are typically accessed via front panel buttons (if present) or through a dedicated configuration interface.

• ഡിസ്പ്ലേ റീഡിംഗ്: The primary display indicates the real-time value from the connected sensor (e.g., temperature, pressure).
• പാരാമീറ്റർ അഡ്ജസ്റ്റ്മെന്റ്: Consult the detailed programming guide (usually a separate document or integrated into the full manual) for instructions on setting control parameters such as setpoints, hysteresis, and alarm thresholds.
• റിലേ ഔട്ട്പുട്ടുകൾ: The two relay outputs will activate or deactivate based on the configured control logic and the measured sensor value.
• നില സൂചകങ്ങൾ: Observe any LED indicators on the front panel for operational status, alarm conditions, or relay activation.

6. പരിപാലനം

Regular maintenance ensures the longevity and reliable operation of your AKO 15226 controller.

• വൃത്തിയാക്കൽ: Periodically clean the exterior of the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.
• പരിശോധന: Regularly inspect wiring connections for any signs of wear, corrosion, or looseness. Tighten connections as necessary.
• പരിസ്ഥിതി പരിശോധന: പ്രവർത്തന അന്തരീക്ഷം നിശ്ചിത താപനിലയിലും ഈർപ്പത്തിലും ഉള്ളിലാണെന്ന് ഉറപ്പാക്കുക.
• സെൻസർ കാലിബ്രേഷൻ: If accuracy is critical, periodically check and recalibrate the connected sensors according to their respective manufacturer's guidelines.
• ഫേംവെയർ അപ്‌ഡേറ്റുകൾ: നിർമ്മാതാവ് പരിശോധിക്കുക website for any available firmware updates, though this model typically does not support user-updatable firmware.

7. പ്രശ്‌നപരിഹാരം

If you encounter issues with your AKO 15226 controller, refer to the table below for common problems and their solutions.

8 സ്പെസിഫിക്കേഷനുകൾ

Detailed technical specifications for the AKO 15226 Electronic Controller:

9. വാറൻ്റിയും പിന്തുണയും

AKO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official AKO website. In case of technical issues or questions not covered in this manual, please contact AKO customer support or your authorized distributor.

Please have your model number (AKO 15226) and serial number (if applicable) ready when contacting support for faster service.