1. ആമുഖം
This manual provides detailed instructions for the installation, operation, and maintenance of your GATEMAN WF20 Fingerprint Digital Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and security. Keep this manual for future reference.
സുരക്ഷാ മുൻകരുതലുകൾ
- Do not attempt to disassemble or repair the lock yourself. Contact qualified service personnel.
- Avoid exposing the lock to direct water spray or excessive humidity.
- Use only specified AA alkaline batteries. Do not mix old and new batteries or different types of batteries.
- Ensure the door is properly aligned and closes smoothly before installing the lock.
2. ഉൽപ്പന്നം കഴിഞ്ഞുview
The GATEMAN WF20 is a keyless digital door lock featuring fingerprint recognition and a touch keypad for secure entry. It is designed for modern homes and offices, offering convenience and enhanced security.
ഘടകങ്ങൾ
Familiarize yourself with the main components of your GATEMAN WF20 lock:

Figure 2.1: Front Panel of the GATEMAN WF20 Lock. This image displays the sleek black front panel of the GATEMAN WF20 digital door lock, featuring a numeric touch keypad and a fingerprint scanner located at the top. The brand name 'GATEMAN' is visible above the scanner.

Figure 2.2: Interior Panel of the GATEMAN WF20 Lock. This image shows the interior side of the GATEMAN WF20 lock, highlighting the manual thumb turn for locking/unlocking from inside, an 'OPEN/CLOSE' button, and the battery cover. The 'Smart Living' logo is also visible.
- ഫിംഗർപ്രിന്റ് സ്കാനർ: Located on the top front panel for biometric authentication.
- കീപാഡ് സ്പർശിക്കുക: Numeric pad on the front panel for PIN code entry.
- Manual Thumb Turn: On the interior panel for manual locking and unlocking.
- തുറക്കുക/അടയ്ക്കുക ബട്ടൺ: On the interior panel for quick locking/unlocking.
- ബാറ്ററി കവർ: On the interior panel, protecting the battery compartment.
- റീസെറ്റ് ബട്ടൺ: Small button on the bottom front for system reset.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for the optimal performance of your GATEMAN WF20 lock. It is recommended to have the lock installed by a qualified professional.
3.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ
- ഇന്റീരിയർ യൂണിറ്റിൽ നിന്ന് ബാറ്ററി കവർ നീക്കം ചെയ്യുക.
- ശരിയായ പോളാരിറ്റി (+/-) ഉറപ്പാക്കിക്കൊണ്ട് നാല് (4) പുതിയ AA ആൽക്കലൈൻ ബാറ്ററികൾ ഇടുക.
- Replace the battery cover. The lock will emit a sound indicating it is powered on.
3.2 Initial Setup and Master PIN Registration
Upon first power-up or after a factory reset, you must register a Master PIN code.
- ഇന്റീരിയർ യൂണിറ്റിലെ ബാറ്ററി കവർ തുറക്കുക.
- Press the [Registration] button (usually located near the battery compartment).
- On the front keypad, enter your desired 4-12 digit Master PIN code.
- Press the [*] button to confirm.
- Re-enter the Master PIN code.
- Press the [*] button to confirm. A confirmation sound will indicate successful registration.
കുറിപ്പ്: The Master PIN code is essential for managing other user PINs and fingerprints. Keep it confidential.
4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
4.1 ഫിംഗർപ്രിൻ്റ് ഉപയോഗിച്ച് അൺലോക്ക് ചെയ്യുന്നു

Figure 4.1: Fingerprint Scanning. This image illustrates a user placing their finger on the fingerprint scanner of the GATEMAN WF20 lock for biometric authentication. A red line indicates the scanning area.
- Place your registered finger flat on the fingerprint scanner.
- Hold your finger steady until the lock emits a confirmation sound and unlocks.
4.2 Unlocking with PIN Code
- അത് സജീവമാക്കാൻ കീബോർഡിൽ സ്പർശിക്കുക.
- Enter your registered 4-12 digit PIN code.
- Press the [*] button. The lock will emit a confirmation sound and unlock.
4.3 വാതിൽ പൂട്ടുന്നു
- യാന്ത്രിക ലോക്കിംഗ്: The lock is set to automatically lock after a few seconds when the door is closed.
- Manual Locking (from outside): Touch the keypad or press the '#' button.
- Manual Locking (from inside): Press the 'OPEN/CLOSE' button or turn the manual thumb turn.
4.4 Registering User Fingerprints
- ബാറ്ററി കവർ തുറന്ന് [രജിസ്ട്രേഷൻ] ബട്ടൺ അമർത്തുക.
- Enter the Master PIN code followed by the [*] button.
- Follow the voice prompts or indicator lights to register the fingerprint. Typically, you will be asked to scan the finger multiple times.
- Press the [Registration] button again to exit registration mode.
4.5 Registering User PIN Codes
- ബാറ്ററി കവർ തുറന്ന് [രജിസ്ട്രേഷൻ] ബട്ടൺ അമർത്തുക.
- Enter the Master PIN code followed by the [*] button.
- Enter the desired 4-12 digit user PIN code.
- Press the [*] button to confirm.
- Re-enter the user PIN code.
- Press the [*] button to confirm. A confirmation sound will indicate successful registration.
- Press the [Registration] button again to exit registration mode.
5. പരിപാലനം
5.1 ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ
The lock will provide a low battery warning (audible alarm or indicator light) when batteries are running low. Replace all four AA batteries promptly.
- Remove the battery cover on the interior unit.
- എല്ലാ പഴയ ബാറ്ററികളും നീക്കം ചെയ്യുക.
- Insert four (4) new AA alkaline batteries, observing correct polarity.
- ബാറ്ററി കവർ മാറ്റിസ്ഥാപിക്കുക.
കുറിപ്പ്: Your registered PIN codes and fingerprints will be retained during battery replacement.
5.2 വൃത്തിയാക്കൽ
- Wipe the lock's surface with a soft, dry cloth.
- അബ്രാസീവ് ക്ലീനറുകൾ, ലായകങ്ങൾ, കെമിക്കൽ സ്പ്രേകൾ എന്നിവ ഉപയോഗിക്കരുത്, കാരണം ഇവ ഫിനിഷിനും ഇലക്ട്രോണിക് ഘടകങ്ങൾക്കും കേടുവരുത്തും.
- Keep the fingerprint scanner and keypad clean and free of dust or debris for optimal performance.
6. പ്രശ്നപരിഹാരം
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| ലോക്ക് പ്രതികരിക്കുന്നില്ല. | ഡെഡ് ബാറ്ററികൾ. | നാല് എഎ ബാറ്ററികളും മാറ്റിസ്ഥാപിക്കുക. |
| വിരലടയാളം തിരിച്ചറിഞ്ഞില്ല. | Finger not placed correctly; scanner dirty; unregistered fingerprint. | Ensure finger is clean and placed flat. Clean scanner. Register fingerprint if not already done. |
| പിൻ കോഡ് പ്രവർത്തിക്കുന്നില്ല. | Incorrect PIN entered; keypad not activated. | Ensure keypad is active before entering PIN. Verify PIN code. |
| ബീപ് ശബ്ദങ്ങൾ തുടർച്ചയായി ലോക്ക് ചെയ്യുക. | Low battery warning; door not fully closed. | Replace batteries. Check door alignment and ensure it closes completely. |
| Lock is difficult to operate. | Mechanical obstruction; improper installation. | Check for any obstructions around the door or lock. Re-evaluate installation or contact support. |
7 സ്പെസിഫിക്കേഷനുകൾ
- മോഡൽ: വൈഡ്-ക്സനുമ്ക്സ
- ബ്രാൻഡ്: ഗേറ്റ്മാൻ
- ലോക്ക് തരം: Biometric, Digital
- ഊർജ്ജ സ്രോതസ്സ്: Battery powered (4 AA batteries required)
- മെറ്റീരിയൽ: Other (durable composite/metal)
- ശൈലി: ആധുനികം
- നിറം: കറുപ്പ്
- നിയന്ത്രണ രീതി: Touch, Hand Control
- പ്രത്യേക സവിശേഷതകൾ: കീലെസ് എൻട്രി
- ഇനത്തിൻ്റെ ഭാരം: 907 ഗ്രാം
- പാഴ്സൽ അളവുകൾ: 30.48 x 20.32 x 5.08 സെ.മീ
8. വാറൻ്റിയും പിന്തുണയും
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official GATEMAN webസൈറ്റ്. വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.
For further assistance, you may contact the retailer where the product was purchased.




