എലിടെക് PGW-800 വയർലെസ് ഡിജിറ്റൽ ഹൈ പ്രഷർ ഗേജ് ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Elitech PGW-800 is a wireless digital high-pressure gauge designed for precise measurement of refrigerants in HVAC refrigeration systems. It offers advanced features for efficient maintenance and analysis.

പ്രധാന സവിശേഷതകൾ:

• Upgraded Elitech Tools App: Integrated app for managing various Elitech tools, enhancing efficiency.
• Multiple Refrigerants & Units: Supports over 87 types of refrigerants and 7 pressure units (psi, inHg, kg/cm², cmHg, bar, kPa, Mpa).
• App Calculation: Calculates superheating and subcooling by entering pipe temperature in the app, reducing manual calculation errors.
• Offline Record: Records data offline and transmits current pressure values to the app via Bluetooth automatically.
• ഉയർന്ന സംരക്ഷണ നില: Constructed from ABS and PPT with an IP65 waterproof rating.

പാക്കേജ് ഉള്ളടക്കം:

• Elitech PGW-800 Pressure Gauge
• 3 AA ബാറ്ററികൾ
• 1/4'' Male Adapter
• 1/4'' Female Adapter
• Bent Connector
• ഉപയോക്തൃ മാനുവൽ
• Pressure Gauge Clamp

Image 1.1: Elitech PGW-800 Wireless Digital High Pressure Gauge shown with its mobile application interface.

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

2.1 ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The device requires 3 AA batteries (included). Open the battery compartment on the back of the gauge and insert the batteries, ensuring correct polarity. Close the compartment securely.

2.2 അഡാപ്റ്ററുകൾ ഘടിപ്പിക്കൽ

Select the appropriate adapter (1/4'' male, 1/4'' female, or bent connector) that matches your refrigeration system's port. Carefully thread the adapter onto the gauge's NPT connection. It is recommended to use Teflon tape on the threads to ensure a tight and sealed connection. Use a wrench for installation and removal to prevent damage to the casing.

Image 2.1: The PGW-800 gauge shown with included adapters and user manual.

Image 2.2: The PGW-800 gauge connected to a refrigeration system for pressure measurement.

2.3 Initial Power-On and Zeroing

Press the power button to turn on the gauge. To reset the reading to zero, hold down the "ZERO" button until the display shows "0.0".

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

3.1 Reading Pressure Values

Once connected to the system, the pressure gauge will automatically display the pressure value on its LCD screen. The current unit of measurement will also be shown.

ചിത്രം 3.1: വിശദമായത് view of the PGW-800's LCD display and control buttons.

3.2 Changing Units of Measurement

To switch between pressure units, hold the "UNITS" button. The gauge supports MPa, bar, psi, kPa, kg/cm², cmHg, and inHg.

3.3 Bluetooth Connection and App Usage

The Elitech PGW-800 can connect to the Elitech Tools mobile application for enhanced functionality.

1. ബ്ലൂടൂത്ത് പ്രവർത്തനക്ഷമമാക്കുക: Press the Bluetooth button on the gauge. The Bluetooth logo on the display will flash, indicating it's ready for connection.
2. Open Elitech Gauge App: Launch the Elitech Gauge App on your mobile phone. Ensure Bluetooth and mobile GPS are enabled on your phone.
3. ഉപകരണം ചേർക്കുക: In the app, navigate to "Device management" and click the search button (magnifying glass icon) in the top right corner. Select the correct device (e.g., DPGW-S1) from the list.
4. ബന്ധിപ്പിക്കുക: Click the red Bluetooth button next to the device name in the app. Once the Bluetooth icon turns green, the connection is successful.
5. Add to Workbench: Click the "+" icon to add the device to the main workbench interface.

3.4 Superheat and Subcooling Measurement

The app allows for superheat and subcooling calculations. In the app's main interface, click on the pressure display area to open the function selection dialog. Select "SuperHeat/SubCool" to enable these measurements. You can then input pipe temperature to get calculated values.

3.5 റഫ്രിജറന്റ് തിരഞ്ഞെടുക്കൽ

The app supports a wide range of refrigerants. From the main interface, click on the refrigerant type (e.g., R124) to access the refrigerant management screen. You can select from a list of over 87 refrigerants to match your system.

4. പരിപാലനം

4.1 പൊതു പരിചരണം

The Elitech PGW-800 is IP65 waterproof, providing protection against dust and water jets. However, it is recommended to keep the device clean and dry. Avoid dropping the device or exposing it to extreme temperatures.

Image 4.1: The PGW-800 gauge stored in its protective bag, highlighting proper storage for longevity.

4.2 Data Recording and Export

The device supports offline data recording for up to 7000 points. To manage recorded data:

1. Set Record Interval: In the app, go to "Device Setting" and select "Set record interval" to choose the desired recording frequency (e.g., 1s, 30s, 1min).
2. ഡാറ്റ വായിക്കുക: Under "Device Setting", select "Reading data" to transfer historical data from the device to the app.
3. View റിപ്പോർട്ടുകൾ: In the app's menu, select "Reporting" to view recorded data by date or job. You can analyze data through graphs.
4. കയറ്റുമതി ഡാറ്റ: From the reporting section, you can export data to Excel or PDF documents for further analysis or record-keeping.
5. Clear Historical Data: After reading data, the app will prompt you to clear historical data from the device. Confirm if you wish to delete it.

5. പ്രശ്‌നപരിഹാരം

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

The Elitech PGW-800 comes with a 12 മാസ വാറൻ്റി വാങ്ങിയ തീയതി മുതൽ.

For technical assistance, please contact Elitech's 24/7 US Technician Support via email or phone. Refer to the product packaging or Elitech's official webബന്ധപ്പെടാനുള്ള വിശദാംശങ്ങൾക്കുള്ള സൈറ്റ്.