1. ആമുഖം
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Honda HSS724AAWD 24-inch 196cc Two-Stage സ്നോ ബ്ലോവർ. മെഷീൻ പ്രവർത്തിപ്പിക്കുന്നതിന് മുമ്പ് ദയവായി ഈ മാനുവൽ നന്നായി വായിച്ച് ഭാവിയിലെ റഫറൻസിനായി സൂക്ഷിക്കുക.
1.1 ഉൽപ്പന്നം കഴിഞ്ഞുview
The Honda HSS724AAWD is a robust two-stage snow blower designed for effective snow removal. It features a powerful 196cc Honda GX OHV engine, a 24-inch clearing width, and a 12V electric start system for reliable ignition in cold weather. The wheel-drive system enhances maneuverability across various terrains.
1.2 സുരക്ഷാ മാർഗ്ഗനിർദ്ദേശങ്ങൾ
മുന്നറിയിപ്പ്: ഈ സുരക്ഷാ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് ഗുരുതരമായ പരിക്കോ മരണമോ ഉണ്ടാക്കാം.
- Always wear appropriate protective equipment, including gloves and safety glasses, during operation and maintenance.
- Do not operate the snow blower in enclosed spaces or near buildings without proper ventilation to prevent carbon monoxide poisoning.
- Keep hands, feet, and foreign objects away from rotating parts such as the auger and impeller.
- Ensure the area is clear of debris, rocks, and other objects that could be thrown by the machine.
- Handle fuel with extreme care. Store fuel in approved containers in a well-ventilated area, away from ignition sources.
- Before performing any maintenance or clearing clogs, always turn off the engine, remove the ignition key, and wait for all moving parts to stop.
- Store the snow blower in a secure location, away from children and unauthorized users.
2. സജ്ജീകരണവും അസംബ്ലിയും
Your Honda HSS724AAWD snow blower may require some assembly before initial use. Refer to the separate assembly guide for detailed instructions. Key setup steps include:
- ഹാൻഡിൽബാർ അസംബ്ലി: Securely attach the handlebars to the main unit using the provided hardware.
- ച്യൂട്ട് അസംബ്ലി: Install the discharge chute and its control mechanism. Ensure it rotates freely and locks into position.
- ദ്രാവക പരിശോധനകൾ: Before starting, verify engine oil levels and fill the fuel tank with fresh, unleaded gasoline.
- ടയർ മർദ്ദം: Check and adjust tire pressure to the recommended levels for optimal traction.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
3.1 എഞ്ചിൻ ആരംഭിക്കുന്നു
- ഇന്ധന വാൽവ് തുറന്നിട്ടുണ്ടെന്നും എഞ്ചിൻ സ്വിച്ച് 'ഓൺ' സ്ഥാനത്താണെന്നും ഉറപ്പാക്കുക.
- Move the choke lever to the 'CHOKE' position.
- Press the primer bulb 3-5 times (or as recommended in the engine manual) to prime the carburetor.
- വൈദ്യുത തുടക്കം: Connect an extension cord to the 12V electric start port and press the electric start button. Once the engine starts, disconnect the extension cord.
- റീകോയിൽ ആരംഭം: എഞ്ചിൻ ആരംഭിക്കുന്നത് വരെ റീകോയിൽ സ്റ്റാർട്ടർ ഹാൻഡിൽ ശക്തമായി വലിക്കുക.
- എഞ്ചിൻ സ്റ്റാർട്ട് ചെയ്തുകഴിഞ്ഞാൽ, എഞ്ചിൻ ചൂടാകുമ്പോൾ ചോക്ക് ലിവർ ക്രമേണ 'RUN' സ്ഥാനത്തേക്ക് നീക്കുക.
3.2 Engaging Operation
- ഡ്രൈവ് സിസ്റ്റം: The HSS724AAWD features a wheel-drive system. Use the drive control lever on the handlebar to engage forward or reverse motion.
- Auger/Impeller: Engage the auger control lever to activate the two-stage snow clearing mechanism.
- വേഗത നിയന്ത്രണം: Adjust the ground speed using the speed selector. The machine offers multiple forward and reverse speeds to match snow conditions and operator preference.

3.3 Clearing Snow
- Direct the discharge chute away from people, animals, and property.
- Adjust the chute direction and deflector angle to control the snow throwing distance and trajectory.
- For deep or heavy snow, operate at a slower speed and take narrower passes.
- If the auger or chute becomes clogged, immediately disengage the auger, turn off the engine, remove the ignition key, and use a clearing tool (not your hands) to remove the obstruction.

4. പരിപാലനം
പതിവ് അറ്റകുറ്റപ്പണികൾ നിങ്ങളുടെ സ്നോ ബ്ലോവറിന്റെ ദീർഘായുസ്സും മികച്ച പ്രകടനവും ഉറപ്പാക്കുന്നു.
4.1 എഞ്ചിൻ മെയിന്റനൻസ്
- എണ്ണ മാറ്റങ്ങൾ: Check engine oil before each use and change it according to the schedule in the engine manual.
- എയർ ഫിൽട്ടർ: ആവശ്യാനുസരണം എയർ ഫിൽറ്റർ പരിശോധിച്ച് വൃത്തിയാക്കുകയോ മാറ്റിസ്ഥാപിക്കുകയോ ചെയ്യുക.
- സ്പാർക്ക് പ്ലഗ്: Inspect, clean, and adjust the spark plug annually. Replace if necessary.
- ഇന്ധന സംവിധാനം: Use fresh fuel and a fuel stabilizer for storage. Drain the fuel system before long-term storage.
4.2 പൊതു പരിപാലനം
- ഷിയർ പിന്നുകൾ: Regularly inspect shear pins and replace any that are bent or broken. Keep spare shear pins on hand.
- Auger and Impeller: Check for wear or damage to the auger and impeller blades.
- സ്ക്രാപ്പർ ബാർ: Inspect the scraper bar for wear and adjust or replace it to maintain optimal clearing performance.
- ലൂബ്രിക്കേഷൻ: Lubricate all moving parts as specified in the maintenance schedule.
- സംഭരണം: Clean the snow blower thoroughly after each use. For off-season storage, ensure the fuel system is drained or stabilized, and store in a dry, protected area.

5. പ്രശ്നപരിഹാരം
This section provides solutions to common issues you might encounter with your snow blower.
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| എഞ്ചിൻ ആരംഭിക്കില്ല | No fuel, stale fuel, engine switch OFF, choke not set, fouled spark plug, low oil. | Check fuel level, use fresh fuel, turn engine switch ON, set choke, clean/replace spark plug, check oil level. |
| പ്രവർത്തന സമയത്ത് ശക്തി നഷ്ടപ്പെടുന്നു | Clogged auger/impeller, incorrect speed setting, engine overload. | Clear clogs (engine off!), adjust speed, take narrower passes. |
| Snow discharge is weak or inconsistent | Clogged chute, worn auger/impeller, damaged shear pins. | Clear chute, inspect/replace auger/impeller, replace shear pins. |
| യന്ത്രം ചലിക്കുന്നില്ല | Drive system disengaged, drive belt worn/broken. | Engage drive lever, inspect/replace drive belt. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact authorized Honda service personnel.
6 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| ബ്രാൻഡ് | ഹോണ്ട |
| മോഡൽ നമ്പർ | HSS724AAWD |
| എഞ്ചിൻ തരം | 196cc Honda GX OHV Engine (4-Stroke) |
| ക്ലിയറിംഗ് വീതി | 24 ഇഞ്ച് |
| അനുയോജ്യമായ മഞ്ഞു ആഴം | 21.7 ഇഞ്ച് |
| Max. Discharge Capacity | 1500 lb./min |
| സിസ്റ്റം ആരംഭിക്കുക | 12V Electric Start (Corded) & Recoil Pull-Start |
| ഡ്രൈവ് സിസ്റ്റം | വീൽ ഡ്രൈവ് |
| ചക്രത്തിൻ്റെ വലിപ്പം | 14 ഇഞ്ച് |
| ഉൽപ്പന്ന അളവുകൾ (L x W x H) | 58.5 x 26.4 x 43.5 ഇഞ്ച് |
| ഇനത്തിൻ്റെ ഭാരം | 210 പൗണ്ട് |
| നിറം | ചുവപ്പ് |
| യു.പി.സി | 786102005548 |
7. വാറൻ്റിയും പിന്തുണയും
For detailed warranty information, please refer to the official warranty documentation provided with your Honda HSS724AAWD snow blower or visit the official Honda Power Equipment website. For technical support, parts, or service, please contact an authorized Honda Power Equipment dealer or customer service.





