സ്മോൾറിഗ് കോൾഡ് ഷൂ മൗണ്ട് അഡാപ്റ്റർ (മോഡൽ 2060) ഇൻസ്ട്രക്ഷൻ മാനുവൽ

1. ആമുഖം

This instruction manual provides detailed information for the proper installation and use of your SmallRig Cold Shoe Mount Adapter (Model 2060). This adapter is designed to expand the mounting capabilities of your camera setup, allowing you to attach various accessories such as microphones, flashes, and LED lights to camera cages, handles, or plates.

2. പാക്കേജ് ഉള്ളടക്കം

താഴെ ലിസ്റ്റ് ചെയ്തിരിക്കുന്ന എല്ലാ ഇനങ്ങളും നിങ്ങളുടെ പാക്കേജിൽ ഉൾപ്പെടുത്തിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:

• 2 x SmallRig Cold Shoe Mount Adapters
• 2 x 1/4"-20 Screws
• 4 x M2.5 സ്ക്രൂകൾ
• 2 x Hex Spanners

Image 2.1: Contents of the SmallRig Cold Shoe Mount Adapter package, including two cold shoe mounts, various screws, and hex spanners.

3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

The SmallRig Cold Shoe Mount Adapter can be securely attached to any camera accessory featuring 1/4"-20 or M2.5 threaded holes.

3.1 Identifying Mounting Points

The cold shoe mount features both 1/4"-20 and M2.5 threaded holes on its base for attachment.

ചിത്രം 3.1: പിൻഭാഗം view of the cold shoe mount adapter, highlighting the 1/4"-20 and M2.5 threaded attachment points.

3.2 Attachment Procedure

1. Identify the desired mounting location on your camera cage, handle, or plate. Ensure it has either a 1/4"-20 or M2.5 threaded hole.
2. Align the corresponding threaded hole on the cold shoe mount with the mounting point on your accessory.
3. Insert the appropriate screw (1/4"-20 or M2.5) and tighten it using the provided hex spanner until secure.
4. കുറിപ്പ്: For most camera cages, including those compatible with Sony ZV-E10, a6500, a6300, a6700, the 1/4"-20 screw is typically used. The M2.5 screws are generally for specific SmallRig accessories or when additional stability is required. For SmallRig Full Cage 1661, only the 1/4"-20 screw is needed.

Image 3.2: Illustration of the cold shoe mount adapter being attached to a camera cage.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Once the cold shoe mount adapter is securely installed, you can attach various accessories.

4.1 ആക്സസറികൾ അറ്റാച്ചുചെയ്യുന്നു

1. Slide your accessory (e.g., microphone, flash, LED light) into the cold shoe slot.
2. Ensure the accessory is fully seated. The cold shoe mount features two secure bending bevels on one end to prevent accidental removal.
3. The white arrows on the surface indicate the recommended direction for sliding accessories for optimal security.

Image 4.1: Close-up of the cold shoe mount adapter, showing the anti-off bending bevels and white directional arrows for accessory mounting.

ചിത്രം 4.2: ഉദാample of the cold shoe mount adapter in use, supporting an external microphone on a camera rig.

4.2 അനുയോജ്യത

This cold shoe mount is compatible with a wide range of camera accessories that utilize a standard cold shoe connection. Examples ഉൾപ്പെടുന്നു:

• മൈക്രോഫോണുകൾ
• LED ലൈറ്റുകൾ
• External Flashes
• Small monitors (with appropriate cold shoe adapter)
• Magic Arms (with cold shoe base)
• Cold Shoe Handles

Image 4.3: Visual representation of the cold shoe mount adapter's compatibility with different camera accessories such as cages, LED lights, magic arms, cold shoe handles, and monitor mounts.

5. പരിപാലനം

To ensure the longevity and optimal performance of your SmallRig Cold Shoe Mount Adapter, follow these simple maintenance guidelines:

• Keep the mount clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• ഉയർന്ന താപനിലയിലോ നശിപ്പിക്കുന്ന വസ്തുക്കളിലോ മൗണ്ടിന് വിധേയമാകുന്നത് ഒഴിവാക്കുക.
• Periodically check the tightness of the mounting screws to ensure a secure connection.

6. പ്രശ്‌നപരിഹാരം

6.1 Accessory Not Fitting Securely

• Ensure the accessory has a standard cold shoe base.
• Verify that the accessory is slid fully into the mount, past the anti-off bevels.
• Some accessories may have a locking mechanism that needs to be tightened after insertion.

6.2 Mount Not Attaching to Camera Accessory

• Confirm that your camera accessory has 1/4"-20 or M2.5 threaded holes.
• Ensure you are using the correct screw size (1/4"-20 or M2.5) for the threaded hole.
• Tighten the screw firmly with the hex spanner.

6.3 Compatibility Limitations

This Cold Shoe Mount is അല്ല suitable for DJI gimbals and അല്ല for ZHIYUN gimbals.

7 സ്പെസിഫിക്കേഷനുകൾ

Image 7.1: The compact size of the SmallRig Cold Shoe Mount Adapter, shown held in a hand.

8. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please refer to the official SmallRig webസൈറ്റിൽ ബന്ധപ്പെടുകയോ അവരുടെ ഉപഭോക്തൃ സേവനവുമായി നേരിട്ട് ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്ക് വാങ്ങിയതിന്റെ തെളിവായി നിങ്ങളുടെ വാങ്ങൽ രസീത് സൂക്ഷിക്കുക.

ഔദ്യോഗിക സ്മോൾറിഗ് Webസൈറ്റ്: www.smallrig.com