JDIAG 2IN1 TPMS Relearn Tool

ആമുഖം

The JDIAG 2IN1 TPMS Relearn Tool Super EL50448 is an essential device designed to facilitate the relearning and activation of Tire Pressure Monitoring System (TPMS) sensors in compatible GM and Ford series vehicles. This tool enables users to reset the TPMS light after tire rotations, sensor replacements, or seasonal tire changes, ensuring proper tire pressure monitoring for vehicle safety and optimal performance.

സുരക്ഷാ വിവരങ്ങൾ

• Always refer to your vehicle's owner's manual for specific TPMS relearn procedures and safety guidelines.
• Ensure the tool is powered by a new, fully charged 9V battery for optimal performance and to prevent unexpected interruptions during the relearn process.
• Do not attempt to use this tool on vehicles not explicitly listed as compatible in the compatibility section or your vehicle's manual.
• Keep the tool away from water, excessive moisture, and extreme temperatures to prevent damage.
• This tool is designed for activating TPMS sensors and initiating the relearn process; it does not diagnose faulty sensors or replace the need for mechanical repairs.
• Perform the relearn procedure in a safe, well-lit area, away from moving traffic.

ഉൽപ്പന്നം കഴിഞ്ഞുview

The JDIAG Super EL50448 is a compact, handheld device featuring a simple one-button operation. It is equipped with distinct indicator lights for GM (G) and Ford (F) modes, allowing for easy identification of the active relearn mode. Its ergonomic design ensures comfortable handling during use, making the TPMS relearn process straightforward and efficient.

ചിത്രം 1: ഫ്രണ്ട് view of the JDIAG Super EL50448 TPMS Relearn Tool, showing the 'G' and 'F' indicator lights and the main activation button.

ചിത്രം 2: Key features of the JDIAG Super EL50448, highlighting its stronger signal, longer battery life, simple operation, and ergonomic design.

സജ്ജമാക്കുക

ബാറ്ററി ഇൻസ്റ്റാളേഷൻ

The JDIAG Super EL50448 requires one 9V battery (not included) for operation. For optimal performance and signal strength, it is highly recommended to use a brand-new, fully charged 9V battery. A low battery can affect the tool's ability to activate sensors.

1. ഉപകരണത്തിന്റെ പിൻഭാഗത്ത് ബാറ്ററി കമ്പാർട്ട്മെന്റ് കണ്ടെത്തുക.
2. Open the battery compartment cover by sliding or unlatching it.
3. Insert a new 9V battery, ensuring that the positive (+) and negative (-) terminals align correctly with the connectors inside the compartment.
4. ബാറ്ററി കമ്പാർട്ട്മെന്റ് കവർ ശരിയായി ക്ലിക്കു ചെയ്യുന്നത് വരെ സുരക്ഷിതമായി അടയ്ക്കുക.

ചിത്രം 3: Illustration of the 9V battery compartment and the low battery reminder feature, where both 'G' and 'F' lights flash when the battery is low.

പ്രവർത്തന നിർദ്ദേശങ്ങൾ

Identifying and Switching Relearn Modes (GM/Ford)

The JDIAG Super EL50448 supports both GM and Ford relearn modes. The active mode is indicated by a flashing light on the device:

• എങ്കിൽ "G" light flashes, the device is in GM Relearn Mode.
• എങ്കിൽ "F" light flashes, the device is in Ford Relearn Mode.

മോഡുകൾക്കിടയിൽ മാറാൻ:

1. ഏകദേശം 5 സെക്കൻഡ് നേരത്തേക്ക് പവർ ബട്ടൺ അമർത്തിപ്പിടിക്കുക.
2. Both the "G" and "F" lights will flash simultaneously.
3. Release the button. The device will now switch to the other relearn mode (e.g., from GM to Ford or vice versa).

ചിത്രം 4: Visual guide for identifying and switching between GM and Ford relearn modes using the device's indicator lights and main button.

TPMS Relearn Procedure

Follow these general steps to reset your TPMS sensors. Always consult your vehicle's owner's manual for the exact procedure to put your specific vehicle into "Tire Training Mode" or "TPMS Relearn Mode." The sequence for activating sensors is typically Left Front, Right Front, Right Rear, Left Rear.

1. വാഹനം തയ്യാറാക്കുക: Put your vehicle into TPMS relearn mode. This typically involves specific ignition key cycles, pressing certain buttons, or using the vehicle's onboard computer. The vehicle's horn may chirp twice to confirm entry into relearn mode.
2. ഉപകരണം സജീവമാക്കുക: Press the power button on the JDIAG Super EL50448 once to activate it. Ensure the correct mode (G for GM, F for Ford) is indicated.
3. സ്ഥാന ഉപകരണം: Starting with the front left tire (driver's side front), hold the antenna of the tool near the valve stem. For GM vehicles, hold the tip of the tool near the valve stem. For Ford vehicles, hold the right side of the tool near the valve stem, parallel to it.
4. സെൻസർ സജീവമാക്കുക: Press and hold the activation button on the tool. Wait for the vehicle's horn to chirp, indicating the sensor has been successfully activated and learned. This typically takes less than a minute per sensor.
5. Repeat for Remaining Tires: Move to the next tire in the specified sequence (usually front right, rear right, rear left). Repeat step 4 for each tire.
6. Complete Relearn: Once all four sensors are activated, the vehicle may give a final horn chirp or display a message on the dashboard to confirm the completion of the relearn process.

ചിത്രം 5: Demonstrates the correct positioning of the tool's antenna parallel to the valve stem for effective sensor activation.

ചിത്രം 6: Step-by-step visual guide for resetting TPMS sensors, including battery insertion, tool positioning, sensor activation, and following vehicle sequence.

പ്രധാന കുറിപ്പുകൾ:

• Some Ford F150 models and other Ford vehicles may require using the GM setting on the tool if the Ford setting does not work. This has been reported by users.
• The tool works with original equipment Tire Pressure Monitoring Systems (TPMS) operating at 315/433MHz frequencies.
• This tool is not compatible with heavy trucks that have more than 4 tires or vehicles equipped with aftermarket/external TPMS systems.

വാഹന അനുയോജ്യത

The JDIAG Super EL50448 is compatible with a wide range of GM and Ford series vehicles. Please refer to the detailed compatibility list below. If your vehicle's brand and model are not listed, it may not be compatible with this tool.

ചിത്രം 7: Comprehensive list of compatible Ford, Lincoln, Mazda, Mercury, GMC, Chevrolet, Buick, and Cadillac vehicle models and their respective year ranges. Please verify your vehicle's specific model and year against this list.

കുറിപ്പ്: This tool is designed for vehicles equipped with an original tire pressure monitoring system (TPMS). It quickly enters TPMS learning mode and displays real-time pressure data for all 4 tires (based on 315/433MHz frequencies).

ട്രബിൾഷൂട്ടിംഗ്

സ്പെസിഫിക്കേഷനുകൾ

• മോഡൽ: Super EL50448
• ബ്രാൻഡ്: JDIAG
• അളവുകൾ (L x W x H): ഏകദേശം 6.02 x 2.12 x 1.25 ഇഞ്ച് (15.29 x 5.38 x 3.18 സെ.മീ)
• ഇനത്തിൻ്റെ ഭാരം: ഏകദേശം 4.9 ഔൺസ് (139 ഗ്രാം)
• മെറ്റീരിയൽ: Rubber (housing)
• ഊർജ്ജ സ്രോതസ്സ്: 1 x 9V ബാറ്ററി (ഉൾപ്പെടുത്തിയിട്ടില്ല)
• ഔട്ട്പുട്ട് തരം: ഡിജിറ്റൽ
• സെൻസിംഗ് ദൂരം: Approximately 2 Inches (5 cm)
• പ്രവർത്തന ആവൃത്തികൾ: 315/433 MHz (compatible with standard TPMS sensors)

മെയിൻ്റനൻസ്

• Store the tool in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
• Remove the 9V battery if the tool will not be used for an extended period (e.g., several months) to prevent battery leakage and potential damage to the device.
• Clean the tool with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the casing അല്ലെങ്കിൽ ആന്തരിക ഘടകങ്ങൾ.
• Avoid dropping the tool or subjecting it to strong impacts, which could compromise its functionality.

വാറൻ്റിയും പിന്തുണയും

For information regarding product warranty, technical support, or service, please refer to the contact information provided with your original purchase or visit the official JDIAG website. Ensure you retain your proof of purchase for any warranty claims or support inquiries.

JDIAG Official Store: Visit JDIAG Store on Amazon

വീഡിയോകളെക്കുറിച്ചുള്ള കുറിപ്പ്: While this product may have associated instructional videos, specific embeddable video URLs were not provided in the product data. Please check the product listing page or the manufacturer's official channels for any available video guides.